• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.967-987
• /
• 2020

A numerical analysis is carried out for the marine propellers in open water conditions to investigate the effect of the wall treatments in model and full scale. The standard wall function to apply the low of the wall and the two layer zonal model to calculate the whole boundary layer for a transition phenomenon are used with one turbulence model. To determine an appropriate distance of the first grid point from the wall when using the wall function, a formula based on Reynolds number is suggested, which can estimate the maximum y+ satisfying the logarithmic law. In the model scale, it is confirmed that a transition calculation is required for a model scale propeller with low Reynolds number that the transient region appears widely. While in the full scale, the wall function calculation is recommended for efficient calculations due to the turbulence dominant flow for large Reynolds number.

• 한국과학교육학회지
• /
• 제27권8호
• /
• pp.724-742
• /
• 2007

The purpose of this study was to develop a scientific inquiry model that makes scientific inquiry accessible to science teachers as well as students. To develop a scientific inquiry model, we investigated the research process demonstrated by ten scientists who were working at academic research institutions or industrial research institutions. We collected data through scientists' journal articles, lab meetings and seminars, and observation of their inquiry process. After we analyzed the scientists' inquiry strategies and processes of inquiry, we finally developed the Scientist's Methodology of Investigation Process model named SMIP. The SMIP model consists of four domains, 15 stages, and link questions, such as "if, why", and "how". The SMIP model stressed that inquiry process is a selective process rather than a linear or a circular process. Overall, these findings can have implication science educators in their attempt to design instruction to improve the scientific inquiry process.

• 한국지반공학회논문집
• /
• 제30권5호
• /
• pp.47-54
• /
• 2014

전단파 속도는 내진설계시 중요한 설계인자이나 지반조사의 목적으로는 흔히 경제적, 시간적 제약 등으로 시험을 통한 측정이 널리 이루어지지 않고 있다. 본 연구에서는 인공신경망 기법을 이용하여 가장 일반적인 현장 지반조사시험인 표준관입시험 결과를 바탕으로 사질토 지반에서의 전단파 속도를 예측하는 연구를 수행하였다. 650개 데이터 세트를 이용해 표준관입시험 저항치 $N_{60}$, 함수비, 세립분함량, 비중을 입력변수로 하여 전단파속도를 추정하는 인공신경망 모델을 구축하고 입력변수별 전단파속도에 미치는 영향을 민감도 해석을 통해 조사하였다. 그리고, 기존의 국내 외 7개의 표준관입시험을 이용한 전단파속도 예측 경험식들과 인공신경망에 의한 결과를 비교하였다. 민감도 분석결과 표준관입시험 저항치의 영향이 월등히 큰 것으로 나타났으며, 모델효율계수와 평균제곱근오차를 사용하여 기존의 경험식들과 인공신경망 모델의 예측 능력을 비교한 결과 인공신경망 모델의 예측 결과가 가장 좋은 것으로 나타났다.

• 대한원격탐사학회지
• /
• 제33권6_2호
• /
• pp.1047-1060
• /
• 2017

현대사회에서 지속적으로 진행되고 있는 지구 온난화 현상은 비정상적인 기상 현상을 빈번히 발생시키고 있다. 특히 21세기에는 폭우와 같이 수문학적 측면에서 물의 특성이 전과 다르고, 수문학적 재해의 강도와 빈도가 증가하고 있다. 그 중 도시 지역에서는 재해로 인한 피해가 극대화될 가능성이 크기 때문에 피해를 대비하기 위한 재해에 대한 예측이 필요하다. 따라서 본 연구에서는 우리나라의 대표적인 도시 자연 재해인 산사태를 로지스틱 회귀(Logistic regression, LR) 모델을 이용하여 분석하고 현장조사를 통해 산사태 이후의 관리 현황을 조사 및 검증하였다. 현장조사 대상 지역은 기존에 산사태 발생지역 및 본 연구의 연구결과로부터 산사태 취약성이 높게 나타난 지역을 중심으로 수행하였다. 기존 산사태 발생지 데이터는 2011년 우면산 산사태 당시의 현장조사 자료 및 항공사진 비교분석을 통해 추출하였다. 산사태 관련 요인은 항공사진으로부터 제작된 지형도와 임상도에서 추출하였다. 산사태 취약성 지도는 산사태에 영향을 미치는 총 13개 요인을 통해 구성된 공간 데이터베이스에 LR 모델을 적용하여 제작되었다. 마지막으로 ROC(Receiver operating characteristic) 곡선을 이용해 산사태 취약성 지도를 검증한 결과 77.79%의 정확도를 나타냈다. 추가적으로, 연구결과에 나타난 산사태 취약지역에 대해 2011년 산사태 이후 산사태가 어떻게 관리되었는지를 확인하기 위해 현장조사를 수행하였다. 본 연구의 결과는 국내 도시 산사태 관리에 관한 정책 수립에 있어 과학적 근거로 활용할 수 있을 것으로 기대된다.

• 유통과학연구
• /
• 제11권12호
• /
• pp.5-11
• /
• 2013

Purpose - The purpose of this study was to construct a turnover estimation model by investigating research by Park et al. (2006) on the market area of domestic distribution. The study investigated distribution by using a new tool for the turnover estimation technique. This study developed and discussed the turnover estimation technique of Park et al. (2006), applying it to a large-scale retailer in "D"city that was suitable for on-the-spot distribution. It constructed the new model in accordance with test procedures keeping to this retail business location, to apply its procedures to a specific situation and improve the turn over estimation process. Further, it investigated the analysis and procedures of existing turnover estimation cases to provide problems and alternatives for turnover estimation for a large-scale retailer in "D"city. Finally, it also discussed problems and scope for further research. Research design, data, and methodology - This study was conducted on the basis of "virtue" studies. In other words, it took into account the special quality of the structure of Korea's trade zones. The researcher sought to verify a sale estimate model for use in a distribution industry's location. The main purpose was to enable the sale estimate model (that is, the individual model's presentation) to be practically used in real situations in Korea by supplementing processes and variables. Results - The sale estimate model is constructed, first, by conducting a data survey of the general trading area. Second, staying within the city's census of company operating areas, the city's total consumption expenditure is derived by applying the large-scale store index. Third, the probability of shopping is investigated. Fourth, the scale of sales is estimated using the process of singularity. The correct details need to be verified for the model construction and the new model will need to be a distinct sale estimate model, with this being a special quality for business conditions. This will need to be a subsequent research task. Conclusions - The study investigated, tested, and supplemented the turnover estimation model of Park et al. (2006) in a market area in South Korea. Supplementation of some procedures and variables could provide a turnover estimation model in South Korea that would be an independent model. The turnover estimation model is applied, first, by undertaking an investigation of the market area. Second, a census of the intercity market area is carried out to estimate the total consumption of the specific city. Consumption is estimated by applying indexes of large-scale retailers. Third, an investigation is undertaken on the probability of shopping. Fourth, the scale of turnover is estimated. Further studies should investigate each department as well as direct and indirect variables. The turnover estimation model should be tested to construct new models depending on the type of region and business. In-depth and careful discussion by researchers is also needed. An upgraded turnover estimation model could be developed for Korea's on-the-spot distribution.

• Geomechanics and Engineering
• /
• 제27권5호
• /
• pp.497-509
• /
• 2021

A large deformation FEM (Finite Element Method) based numerical analysis has been performed to study the behaviour of the bell-shaped anchor embedded in undrained saturated (cohesive) soil with the help of finite element based software ABAQUS. A typical model anchor with bell-diameter of 0.125 m, embedded in undrained saturated soil with varying cohesive strength (from 5 kN/m² to 200 kN/m²) has been chosen for studying the characteristic behaviour of the bell-shaped anchor installed in cohesive soil. Breakout factors have been evaluated for each case and verified with the results of experimental model tests for three different types of soil samples. The maximum value of breakout factor was found as about 8.5 within a range of critical embedment ratio of 2.5 to 3. An explicit model has been developed to estimate the breakout factor (F_c) for uplift capacity of bell-shaped anchor within clay mass in terms of H/D ratio (embedment ratio). It was also found that, the ultimate uplift capacity of the anchor increases with the increase of the value of cohesive strength of the soil and H/D ratio. The empirical equation developed in the present investigation is usable within the range of cohesion value and H/D ratio from 5 kN/m² to 200 kN /m² and 0.5 to 3.0 respectively. The proposed model has been validated against data obtained from a series of model tests carried out in the present investigation. From the stress-profile analysis of the soil mass surrounding the anchor, occurrence of stress concentration is found to be generated at the joint of anchor shaft and bell. It was also found that the vertical and horizontal stresses surrounding the anchor diminish at about a distance of 0.3 m and 0.15 m respectively.

• 한국대기환경학회지
• /
• 제19권4호
• /
• pp.427-436
• /
• 2003

This study is to establish a waste bed combustion model that can be available to assist the design of incinerators for efficient operation control of municipal waste incinerators. An unsteady one -dimensional bed combustion modeling was developed which incorporates the various sub-process models and solves the governing equations for both gases and solids in the waste bed combustion phenomena. The combustion characteristics and the properties of the combustion gas released from the bed were investigated by using a developed model. Besides, a sub-model which predicts the formation and destruction of nitrogen oxides in the waste bed was also developed as a post-processor for the waste combustion model. It is found that the reduction rate of nitrogen oxides is enhanced in the char layer.

• 한국생물정보학회:학술대회논문집
• /
• 한국생물정보시스템생물학회 2005년도 BIOINFO 2005
• /
• pp.29-34
• /
• 2005

DNA microarray becomes a major tool for the investigation of global gene expression in all aspects of cancer and biomedical research. DNA microarray experiment generates enormous amounts of data and they are meaningful only in the context of a detailed description of microarrays, biomaterials, and conditions under which they were generated. MicroArray Gene Expression Data (MGED) society has established microarray standard for structured management of these diverse and large amount data. MGED MAGE-OM (MicroArray Gene Expression Object Model) is an object oriented data model, which attempts to define standard objects for gene expression. To assess the relevance of DNA microarray analysis of cancer research it is required to combine clinical and genomics data. MAGE-OM, however, does not have an appropriate structure to describe clinical information of cancer. For systematic integration of gene expression and clinical data, we create a new model, Cancer Genomics Object Model.

• 한국농공학회지
• /
• 제41권2호
• /
• pp.37-43
• /
• 1999

This study was conducted to develop the simple and convenient irrigation control model which can maintain the appropriate rates of irrigation and drainage of nutrient solution according to the enviornmental conditions and growth stages in soilless culture of cucumber. In order to obtain fundamental data for development of the model, investigation of the actual state of soilless culture practices was carried out. Most irrigatioin systems of soillness culture were controlled by the time colock. Evapotranspiration of cucumber in soilness culture was investigated and correlations with environmental conditions were analyzed , and its estimating model was developed. In order to develop the irrigation system which can control the amount of nutrient solution applied according to seasons, weather conditions, and growth stages, a irrigation clock control was developed. Applicability of the model was tested by simulation. Drainage rates of nutrient solution controlled by conventional time clock, integrated solar radiation, and the developed model were 61% , 20%, and 32% , respectively in cucumber perlite culture.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2006년도 추계학술대회
• /
• pp.346-361
• /
• 2006

We establish two models -'intermediate' role model and 'infra-structural' role model - to confirm what role the concepts of 'long-term orientation' and 'asset specificity' execute in the context of supply chain management practices affect on SCM performances. We confirm the model's statistical significance with empirical investigation about 167 manufacturing companies in all over the country. As a result, we find that real data fits to 'infra-structural' role model with added paths of concepts and variables rather to 'intermediate' role model. We prove these results with empirical method of confirmatory factor analysis and structural equation model with AMOS program.