• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.1
• /
• pp.10-26
• /
• 2013

To understand the traffic emissions with high temporal and spatial resolutions on road, a mobile laboratory was developed. The objective of this study is to characterize on-road air pollution on Naebu express way surrounding the northern area of Seoul, Korea. We measured the number concentration of ultrafine particles larger than 5 nm and particle size distribution using a condensation particle counter and a fast mobility particle sizer, respectively on 3, 7, and 8 December 2009. The average ultrafine particle number concentration on the Naebu express way excluding tunnels was 126,000 particles/$cm^3$ and 4.2 times higher than that on internal road at Korea Institute of Science and Technology in Seoul, and more than twice higher than that measured on and at the arterial roads of Seoul in previous studies. The maximum ultrafine particle number concentration was observed at the tunnel sections. It was 232,000 particles/$cm^3$ and 1.8 times higher than average ultrafine particle number concentration for the other sections on Naebu express way. The ultrafine particle number concentration on the wider roads with higher traffic volume along the Han River was similar to that in the residential section, probably because of enhanced dilution effect in widely open environment. The size distribution of particles on the Naebu express way was highly fluctuated for a short duration. Ultrafine particles measured at the tunnel showed a bimodal size distribution with mode diameters of ~10 nm and ~50 nm. At the Han riverside section, ~10 nm particles appeared significantly compared with size distribution at the tunnel. This on-road measurement approach can be utilized to manage vehicle-related air pollution in urban area.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.4
• /
• pp.54-62
• /
• 2018

As a part of realization of artificial intelligence signal(AI Signal), this study proposed an actuated signal algorithm based on vehicle queue length that estimates in real time by deep learning. In order to implement the algorithm, we built an API(COM Interface) to control the micro traffic simulator Vissim in the tensorflow that implements the deep learning model. In Vissim, when the link travel time and the traffic volume collected by signal cycle are transferred to the tensorflow, the vehicle queue length is estimated by the deep learning model. The signal time is calculated based on the vehicle queue length, and the simulation is performed by adjusting the signaling inside Vissim. The algorithm developed in this study is analyzed that the vehicle delay is reduced by about 5% compared to the current TOD mode. It is applied to only one intersection in the network and its effect is limited. Future study is proposed to expand the space such as corridor control or network control using this algorithm.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.2 s.72
• /
• pp.195-202
• /
• 2006

Thin-walled structures are efficiently utilized an automobiles, aircraft, satellite and ship as well as needed light weight simultaneously. This paper presents new shape of automobile hood reinforcement that rotating parts as engine, transmission are protected by thin-walled structures. The automobile hood is concerned about the resonance occurs due to the frequency of the rotating parts. The hood must be designed by supporting the stiffness of design loads and considering the natural frequencies. Hence, it is sustained the stiffness and considered the vibration by resonance. It is deep related to ride. Therefore, the topology, shape and size optimization methods are used to design the automobile hood. Topology technique is applied to determine the layout of a structural component optimum size with maximized natural frequency by volume reduction. In this research, The optimal structure layout of an inner reinforcement of an automobile hood for the natural frequency of a designated mode is obtained by using topology optimization method. The optimum size and the optimum shape are determined by PLBA(Pshenichny-Lim-Belegundu-Arora) algorithm.

• Journal of Environmental Health Sciences
• /
• v.24 no.1
• /
• pp.120-131
• /
• 1998

This study was performed to define the physicochemical characteristics of food waste and food wastewater, and to find the effect of moisture content variation and salinity variation on aerobic composting for food wastes. In moisture content variation experiment, the samples of 2-1, 2-2, 2-3 and 24 were prepared by the moisture content of 83.8%, 70.9%, 64.8% and 45.1%, respectively. In salinity variation experiment, the samples of 3-1, 3-2, 3-3 and 3-4 were prepared by the salinity of 0.99%, 1. 69%, 1.75% and 2.34%, respectively. In both experiments, aerobic composting reactors were operated by the mode which was composed of half an hour's stirring and 2 hour's aeration per day, for 45 days. The followings are the conclusions that were derived from this study. 1. In the study of physicochemical characteristics of food waste and food wastewater, the values of pH were 4.19 and 3.96, the values of salinity were 0.91% and 1.17%, and the values of conductivity were 7.6 mS/cm and 18.2 mS/cm, respectively. 2. In food waste, the moisture content was 60.3%, organic compound content was 96.1%, total carbon was 48.0%, total nitrogen was 1.5%(therefore, C/N ratio was 32), and the concentration of total phosphorus was 1.34 mg/kg. 3. The time of temperature ascending was delayed, the highest temperature was lowered, the duration period of high temperature was shortened by the increasing of moisture content. In the higher moisture content, anaerobic condition was formed, bad smell was released, insects were gathered and multiplicated, and the reaction rate of composting was reduced. 4. In moisture content experiment, C/N ratios were changed from the range of 31.2-34.8 at the beginning phase to that of 20.4-28.4 at the last phase. 5. In salinity experiment, the reduction rate of volume was increased(40.3%) when the salinity was decreased(0.99%). Also, the reduction rate of mass was increased(51.8%) when the salinity was decreased(0.99%). This fact denotes that salinity hinders the process of composting. 6. the concentrations of total nitrogen and total phosphorus were increased from 0.74% to 1.10%, and from 0.82 mg/kg to 3.44 mg/kg, respectively when the salinity was decreased from 2.34% to 0.99%.

• KSBB Journal
• /
• v.10 no.3
• /
• pp.304-316
• /
• 1995

For fuel alcohol production, enzymatic liquefaction and saccharification of tapioca starch by ${\alpha}$-amylase and glucoamylase were studied. The thermophilic ${\alpha}$-amylase Termamyl produced from Bacillus licheniformis gave a better liquefaction than the relalively low temperature enzyme BAN from B. subtilis. Oplimal temperature and pH with Termamyl were $90∼95^{\circ}C$ and 5.8, respectively. Minimal amount of Termamyl 240uc for a satisfactory liquefaction for a two-hour reaction was about 0.0125% (v/w) with respect to the mass of tapioca used. For saccharification experiments two enzymes, Novo AMG and Do-I1 enzymes were compared. The enzymatic activity of each enzyme was a little different depending on the substrate used and the latter was found to have a significant amount of ${\alpha}$-amylase activity. With Novo AMG optimal temperature was about $58^{\circ}C$ The pH optimum was 4.3 with maltose, however, with tapioca, no difference was observed between pH 4.3 and 5.7 which is a natural, unadjusted pH of liquefied tapioca. For 85% of completion of saccharification, it was necessary to use 0.0625% (v/w) of Novo AMG 400L for tapioca and to run the reaction for more than 10 hr, Packed volume of solid particles in tapioca slurry remained at around 30% during liquefaction and saccharification. This indicates that the removal of the solid particle before fermentation is not economically feasible at all, even though the solid particles make it very difficult to operate the bioreactor in a continuous mode with cell-recycle.

• KSBB Journal
• /
• v.22 no.5
• /
• pp.271-277
• /
• 2007

Natural pigments have many applications like colouring agent, pigments, food additives, and antiseptics. At present, instead of synthetic pigments that have contributed to the development of industry, many kinds of natural pigments have been developed. The constituents of gardenia fruits, Gardenia jasminoides ELLIS, are traditionally known as herb medicine and natural dyes/pigments due to the customer is needs. The fruits produce yellow carotenoid pigments and iridoid compounds. The two main components in the yellow pigments are called crocin and crocetin. The extraction mode of yellow pigment from Gardenia is depended upon the extraction time, temperature, and volume of solvent. Red pigments or blue pigments formed from geniposide and amino acids have been reported a lot. Geniposide, the principal iridoid glucoside contained in gardenia fruit, was hydrolyzed to genipinic acid or genipin as a precursor for the pigment by enzymatic or chemical reaction. These red or blue pigments prepared with materials hydrolyzed of geniposide and amino acid and had properties governed by the electrostatic character of the amino acid. The pigments showed good stability to heat and pH but were gradually bleached by light while the other natural pigments are unstable in light, heat, acid, and base solution. The safety of the pigments was considered to be of little virulences in comparison to synthetic pigments.

• Journal of the Korea Concrete Institute
• /
• v.14 no.2
• /
• pp.216-222
• /
• 2002

With deterioration of the nation's infrastructure comes the growing, need for effective means of rehabilitating structures. Possibly one for the most challenging tasks is to upgrade the overall capacity of concrete structure. Therefore, considerable efforts are still being made to develop new construction materials. Rehabilitation of damaged RC structures occasionally requires the removal and replacement of concrete in the tension zone of the structural members. Typical situation where the tension zone repair is necessary is when the concrete in the tension zone in beams or slabs has spalled off as a result of corrosion in the bottom reinforcing bars or due to extensive fire. The rehabilitation of such conditions normally involves the removal of the concrete beyond the reinforcement bars, cleaning or replacing the tensile bars and reinstatement of concrete to cover the steel bars the original shape and size. This study focused on the flexural behavior of reinforced concrete beams strengthened by steel strand and carbon fiber sheet in the tension zone. The properties of beams are 15$\times$25 cm rectangular and over a 200cm span. Test parameters in this experimental study were strengthening methods, jacking volume, the number of sheet. We investigated the flexural behavior of simply supported RC beams which are strengthened with the carbon fiber sheet, monotonic loads. Attention is concentrated upon overall bending capacity, deflection, ductility index, failure mode and crack development of repaired and rehabilitated beams.

• Journal of Animal Environmental Science
• /
• v.1 no.2
• /
• pp.125-136
• /
• 1995

To use the earth heat for the pig housing, an underground heat exchanger has constructed in depth of 2.5m and 20m length. The temperature of the outlet air was max. 8 kelvin higher than that of inlet air in winter season. In spite of the -7$^{\circ}C$ outside temperature, it could keep the air temperature from the earth tube above zero degree. The heating performance was maximum in value of 3.25Wh/㎥ and average of 1.75Wh/㎥ by the airflow volume of 340㎥/h. The slope of relative humidity from outlet air has shown gentler than that of inlet air. By using the underground heat exchanger, it would be possible to prepare an relatively uniform relative humidity in the swine stalls. The temperatures on the earth, where PVC pipes are buried, have shown 10~12$^{\circ}C$ on March. This can reduce the difference between day and night temperature during this season by using the underground heat exchanger.

• Korean Journal of Clinical Pharmacy
• /
• v.16 no.1
• /
• pp.23-27
• /
• 2006

Doxorubicin (DXR) is a type of anti-cancer drug called an 'anthracycline glycoside', It works by impairing DNA synthesis, a crucial feature of cell division, and thus is able to target rapidly dividing cells. Doxorubicin is a very serious anti-cancer medication with definite potential to do great harm as well as great good. A liquid chromatography-tandem mass spectroscopy (LC-MS/MS) method was developed to identify and quantify DXR in small-volume biological samples. After the addition of internal standard (IS, $5{\mu}L\;of\;1{\mu}M/ml$ daunorubicin methanol solution) into the serum sample, the drug and IS were extracted by methanol. Following vortex for a 1min and centrifugation at 15,000g for 10 min the organic phase was transferred and evaporated under a vacuum. The residue was reconstituted with $350{\mu}L$ of mobile phase and $10{\mu}L$ was injected into C18 column with mobile phase composed of 0.05M ammonium acetate (0.1 M acetic acid adjusted to pH 3.5) and acetonitrile (40:60, v/v). The flow rate was kept constant at $350{\mu}L/min$. The ions were quantified in the multiple reaction mode (MRM), using positive ions, on a triple quadrupole mass spectrometer. The lower limits of quantification for Doxorubicin in plasma and small tissues were approximately 0.5 ng/mL and 0.5 ng/mL respectively. Intra- and inter-assay accuracy (% of nominal concentration) and precision (% CV) for all analytes were within 15%, respectively.

• Journal of the Korean Magnetic Resonance Society
• /
• v.5 no.2
• /
• pp.99-109
• /
• 2001

Authors investigated neuronal changes of local cellular metabolism in the cerebral lesions of Parkinsonian symptomatic side between before and after stereotactic neurosurgery by follow-up 1H magnetic resonance spectroscopy (MRS). Patients with Parkinson's disease (PD) (n = 15) and age-matched normal controls (n = 15) underwen MRS examinations using a stimulated echo acquisition mode (STEAM) pulse sequence that provided 2${\times}$2${\times}$2 ㎤ (8ml) volume of interest in the regions of substantia nigra, thalamus, and lentiform nucleus. Spectral parameters were 20 ms TE, 2000 ms TR, 128 averages,2500 Hz spectral width, and 2048 data points. Raw data were processed by the SAGE data analysis package (GE Medical Systems). Peak areas of N-acetylaspartate (NAA), creatine (Cr), choline-containing compounds (Cho), inositols (Ins), and the sum (Glx) of glutamate and GABA were calculated by means of fitting the spectrum to a summation of Lorentzian curves using Marquardt algorithm. After blindly processed, we evaluated neuronal alterations of observable metabolite ratios between before and after stereotactic neurosurgery using Pearson product-moment analysis (SPSS, Ver. 6.0). A significant reduction of NAA/Cho ratio was observed in the cerebral lesion in substantia nigra of PD patient related to the symptomatic side after neurosurgery (P : 0.03). In thalamus, NAA/Cho ratio was also significantly decreased in the cerebral lesion including the electrode-surgical region (P : 0.03). A significant reduction of NAA/Cho ratio in lentiform nucleus was not oberved, but tended toward significant reduction after neurosurgery (P = 0.08). In particular, remarkable lactate signal was noted from the surgical thalamic lesions of 6 among 8 patients and internal segments of globus pallidus of 6 among 7 patients, respectively. Significant metabolic alterations of NAA/Cho ratio might reflect functional changes of neuropathological processes in the lesion of substantia nigra, thalamus, and lentiform nucleus, and could be a valuable finding fur evaluation of Parkinson's disease after neurosurgery. Increase of lactate signals, being remarkable in surgical lesions, could be consistent with a common consequence of neurosurgical necrosis. Thus, IH MRS could be a useful modality to evaluate the diagnostic and prognostic implications fur Parkinsons disease after functional neurosurgery.