• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• 제3권1호
• /
• pp.32-40
• /
• 2022

The trade-off between morphology and physical function may vary according to ecological traits. Taking a quantitative approach, we attempted to analyze the differences in the skeletal shape of the lower body and limbs in relation to the ecological traits of four anuran species (Dryophytes japonicus, Glandirana rugosa, Pelophylax nigromaculatus, and Lithobates catesbeianus) occurring in South Korea. Body size, locomotor mode, microhabitat, trophic positions, and predator defense mechanisms were selected for the ecological traits of the anurans. The pelvis, ilium, and urostyle, which are associated with locomotor performance, were selected for the skeletal shape of the lower body. The ratio of limbs, which is related to locomotor mode and microhabitat, was confirmed by analyzing the skeletons of the forelimbs (radio-ulnar and humerus) and hindlimbs (femur and tibiofibular). Both landmark-based geometric morphometrics and traditional methods were used for skeletal shape comparison. The skeletal shape of the lower body was completely different among the four species, whereas the ratio of the limbs was only different in D. japonicus. The skeletal shape of the lower body may be related to body mass and predator defense mechanisms, whereas the ratio of the limbs was related to the locomotor mode and microhabitat. Quantifying these morphological differences among various species can help elucidate the mechanisms of behavioral and morphological changes in response to ecological effects.

• International Journal of Concrete Structures and Materials
• /
• 제2권1호
• /
• pp.57-62
• /
• 2008

When the yield line theory is used to estimate the ultimate strength of a concrete barrier, it is of primary importance that the correct assumption is made for the failure mode of the barrier. In this study, a static test was performed on two full-scale concrete barrier specimens of Korean standard shape that simulate the actual behavior of a longitudinally continuous barrier. This was conducted in order to verify the failure mode presented in the AASHTO LRFD specification. The resulting shape of the yield lines differed from that presented in AASHTO when subjected to an equivalent crash load. Furthermore, the ultimate strengths of the specimens were lower than the theoretical prediction. The main causes of these differences can be attributed to the characteristics of the barrier shape and to a number of limitations associated with the classical yield line theory. Therefore, a revised failure mode with corresponding prediction equations of the strength were proposed based on the yield lines observed in the test. As a result, a strength that was more comparable to that of the test could be obtained. The proposed procedure can be used to establish more realistic test levels for barriers that have a similar shape.

• 한국전산구조공학회논문집
• /
• 제19권2호
• /
• pp.125-138
• /
• 2006

교량의 손상추정을 위한 구조계 규명기법은 신호취득시스템 및 정보처리기술의 발전과 함께 최근에 많은 연구개발이 이루어지고 있다. 신경망기법이나 유전자 알고리즘과 같은 소프트컴퓨팅 기법은 뛰어난 패턴인식성능 때문에 손상추정 문제에 활발히 활용되고 있다. 본 연구에서는 모드계수를 활용한 신경망기법기반 손상추정을 수행하였으며, 신경망을 훈련시키기 위한 훈련패턴을 생성하는 해석모델에서의 불확실성을 효과적으로 고려할 수 있는 방법을 제시하였다. 해석모델의 불확실성 대하여 민감하지 않은 입력자료인 손상 전 후의 모드형상의 차 또는 모드형상의 비를 신경망의 입력자료로 활용하였다. 단 순보와 다주형교량에 대한 수치예제를 통하여 본 연구에서 제시한 기법의 타당성 및 적용성을 검증하였다.

• Structural Engineering and Mechanics
• /
• 제40권1호
• /
• pp.1-11
• /
• 2011

Ambient vibration tests were carried out to evaluate the dynamic properties of an asymmetric steel building with semi-rigid connections. The test case has many non-structural elements, constructed in the city of Tehran (Iran). The tests were conducted to obtain natural frequencies, mode shapes and damping ratio of the structure and then Fourier transform were used to analyze the velocity records obtained from the tests. The first and second natural periods of the building were obtained as 1.37 s and 1.28 s through the test and damping ratio for the first mode was calculated as 0.047. However, Natural periods obtained from finite element model have higher values from those gained from ambient vibration. Then the model was calibrated by modeling of the in-fill masonry panels at their exact locations and considering the boundary conditions by modeling two blocks near the block No. 3, but the differences were existed. These differences may be due to some hidden stiffness of nonstructural elements in the low range of elastic behavior, showing the structure stiffer than it is in reality.

• Structural Engineering and Mechanics
• /
• 제64권6권
• /
• pp.803-817
• /
• 2017

Structural health monitoring has increasingly been a focus within the civil engineering research community over the last few decades. With increasing application of sensor networks in large structures and infrastructure systems, effective use and development of robust algorithms to analyze large volumes of data and to extract the desired features has become a challenging problem. In this paper, we grasp some precautions and key points of the signal processing approach, wavelet, establish a relative reliable framework, and analyze three problems that require attention when applying wavelet based damage detection approach. The cases studies how to use optimal scales for extracting mode shapes and modal curvatures in a reinforced concrete beam and how to effectively identify damages using maximum curves of wavelet coefficient differences. Moreover, how to make a recognition based on the wavelet multi-resolution analysis, wavelet packet energy, and fuzzy sets is a meaningful topic that has been addressed in this work. The relative systematic work that compasses algorithms, structures and evaluation paves a way to a framework regarding effective structural health monitoring, orientation, decision and action.

• 한국생산제조학회지
• /
• 제9권6호
• /
• pp.49-56
• /
• 2000

Due to the rapid increase of long-distance transportation, particular attentions have been paid to truck tires, especially to their dynamic characteristics. In this research, experimental modal analysis on two kinds of light-duty truck tires, i.e., radial tire and bias tire, are performed by using GRFP(global rational fraction polynomial) method to investigate differences of the dynamic behavior of the two tires. The test results have shown that the modal frequencies of bias tire are much higher than the corresponding values of radial tire with a similar mode shape, which is in accordance with the fact that the radial rigidity of bias tire is higher than that of radial tire. And most of the modal decay rates of bias tire are larger than those of radial tire within the scope of this experiment. In the frequency domain range of test, the bias tire has extra modes, which do not occur in the radial tire. This difference is based on the fact that the circumferential rigidity of the bias tire is quire low whereas that of radial tire is so high that the frequencies of the corresponding modes are out of the frequency range of test.

• 대한기계학회논문집A
• /
• 제27권3호
• /
• pp.424-431
• /
• 2003

The spacer grid is one of the main structural components in the fuel assembly, which supports the fuel rods and maintains coolable geometry from an external load. A vibration test and a finite element analysis using ABAQUS on a dummy fuel rod continuously supported by Optimized H type(OHT) and New Doublet (ND) spacer grids arc performed to obtain the vibration characteristics such as natural frequencies and mode shapes an(1 to verify a finite element model. The results from the test and the finite element analysis are compared by modal assurance criteria (MAC) values. It is resulted that MACs for the first, the third and the fifth mode shapes are relatively good as compared with those of the second an(1 fourth ones. The natural frequency differences between two methods as well as the mode comparison results for the rod with OHT spacer grid are better than those with ND spacer grid. It is judged that the FE model for the ND spacer grid spring should be modified to consider the long contact length which actually happen when the spring supports the rod.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.382-387
• /
• 2003

In this paper, a neural networks-based damage detection method using the modal properties is presented, which can effectively reduce the effect of the modeling errors in the baseline finite element model from which the training patterns for the networks are to be generated. The differences or the ratios of the mode shape components between before and after damage are used as the input to the neural networks in this method, since they are found to be less sensitive to the modeling errors than the mode shapes themselves. Results of laboratory test on a simply supported bridge model and field test on a bridge with multiple girders confirm the applicability of the present method.

• 대한기계학회논문집B
• /
• 제38권4호
• /
• pp.337-346
• /
• 2014

본 연구는 주기적 강제 진동이 가해지는 표면의 액적 모드 특성과 표면에 놓인 액적의 제거에 대한 조건을 실험적으로 이해하는 것을 목적으로 하고 있다. 액적의 거동을 명확하게 관찰하기 위해 아크릴 표면에 Teflon 코팅을 진행하여 접촉각을 높였고, 히스테리시스는 25도 이내로 진행하여 액적의 거동이 보다 쉽게 진행되도록 하였다. 본 실험은 먼지가 적은 청정실에서 실험이 진행되었다. 제작된 소수성 표면에 놓인 액적의 실제 공진 주파수를 예측하기 위해 이론 및 실험적 해석을 통해 두 접근방법의 타당성을 파악하였으며, 두 개의 초고속카메라를 액적의 상면과 측면에 설치하여 2가지 측면에서 액적의 다양한 형상 변형 특성- 모드 형상, 분리, 미소 액적의 발생, 그리고 좌우 비틀림의 특성을 관찰하였다. 이론 값 비교결과 실제 공진 주파수 값들의 차이가 약 18% 이하로 관찰되었으며, 이러한 차이는 접촉선 마찰, 비선형 벽 고착, 실험의 불확실성 등에 가장 큰 영향을 받는 것으로 판단된다. 사용된 스피커에 상대적으로 낮은 전압을 인가할 경우 액적의 접촉선은 고정된 상태에서 좌우 대칭적인 액적 형상진동이 나타났다. 반면, 높은 전압을 인가할 경우 액적의 접촉선은 비고정된 상태가 되면서 더 활발한 형상 진동이 나타났다. 가진 주파수가 모드 주파수와 일치할 경우에는 액적의 로브 크기가 주변부 주파수 일 때 보다 비교적으로 컸으며, 같은 전압을 인가 할 경우, 표면에 놓인 액적의 미소 액적 발생 및 완전한 제거는 2차 모드에서만 진행되는 것을 실험을 통해 규명하였다.

• 사상체질의학회지
• /
• 제25권3호
• /
• pp.145-157
• /
• 2013

Objectives This study was aimed to reveal the characteristics of the body shape, face, voice and temperament in Taeyangin. Methods The subjects were recruited from November 2005 to August 2012. Sasang constitutional specialist in each clinics confirmed the Sasang Constitution. Taeyangin (TY) became a standard guidance to be compared with each other Sasang type. Anova test was used in analyzing continuous variables and factor analysis was conducted in temperament questionnaire in advance. Generalized propensity score with age and body mass index (BMI) was used in adjusted model. Significant level was .05 Results 1. The TY body shape were generally smaller than Taeeumin (TE) (p<0.001) and Soyangin (SY) (p<0.05) in crude. The TY body shape were still smaller than TE (p<0.05) and there was no significant difference between TY and SY except rib circumference in males and forehead circumference (p<0.05) in females in adjusted model. 2. The size of face and nose in TY was smaller than in TE and there was different between males and females' TY and others in the characteristics of eye, nose and forehead variables in crude (p<0.05). Most of differences between TY and TE were disappeared in adjusted model. 3. The vocal height and speed of TY was different other types and there was different between males and females' TY in some of frequency change rate in crude (p<0.05). Most of differences between TY and other types were similar before and after adjusted model. 4. The temperament of TY was different with SE before and after adjusted mode 1 (p<0.05). TY males showed difference in expression factor and TY females showed difference in behavior factor compared with TE respectively (p<0.05). Conclusions This study reveals characteristics of body shape, face, voice and character in the TY males females compared with each other type respectively.