• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.536-542
• /
• 2000

The present paper introduces a new fixed interface component mode synthesizing technique based on the notion of higher-order field-consistency. The present technique employs higher-order residual constraint modes in addition to lower fixed interface normal modes while consistency in matching field variables at the substructure interface is maintained. The present field-consistency approach does not increase the size of the synthesized system even if higher-order residual constraint modes are included. A new field-consistent higher-order synthesis technique is first presented and a numerical example is given to verify the present method.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.9
• /
• pp.53-63
• /
• 1994

In indoor radio systems, vehicular communication systems, and land mobile systems, a very important problem is that of maintaining stable communications at all locations. Therefore solutions for the indoor propagation problem are important aspects of the mobile communication system. leaky coxial cables are finding increasing use in communications systesm involving mines, tunnels, tailroads, and highways, and in new obstacle detection, or guided radar, schemes for ground transportation and perimenter surveilance. In this paper a leaky coaxial cable having periodic slots in the outer conductor is described to obtain the propagation modes in the various environments. We use aneccentric cylindrical model to develop the theory for surface-wave propagation on the cable. Numerical Results are also included for the propagation constants, field distribution and current distribution. First, we derive the electromagnetic equation for leaky coaxial cable having symmetrical periodic slots using mode-matching method and Floquet's theorem, and then find various modes, propagation constants, field distribution, etc.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.2
• /
• pp.85-91
• /
• 2002

A novel multi-section power divider configuration is Proposed to obtain wide-band frequency performance up to microwave frequency region. Design procedures for the proposed microwave broadband power divider are composed of a Planar multi-section three-Ports hybrid and a waveguide transformer design procedures. The multi∼section power divider is based on design theory of the optimum quarter- wave transformer Furthermore, in order to obtain the broadband isolation performance between the two adjacent output ports, the odd mode equivalent circuit should be matched by using the lossy element such as resistor. The derived design formula for calculating these odd mode∼matching elements is based on the singly terminated filter design theory. The waveguide transformer section is designed to suppress the propagation of the higher order modes such as waveguide modes due to employing the metallic electric wall. Simulation and experiment show excellent performance of multi section power divider.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.10
• /
• pp.1004-1010
• /
• 2003

In this paper, the 1/4 wavelength backward-wave directional coupler using coupled lines with finite metallization thickness is described. A mode-matching method, simple and fast approach to the quasi-static analysis, has been used to analyse this structure. The numerical results show that it is possible to overcome the disadvantages of weakly coupling, low directivity, and narrow strip distance non-realizable in the case of 1/4 wavelength backward-wave directional coupler with zero thickness conductor. It is also revealed that thicker metallization causes longer coupler length in the case of backward-wave symmetrical parallel coupled line directional coupler. The finite metallization thickness can be a new parameter for tight coupling in the design of backward-wave directional couplers, which enables us to design more accurate properties of monolithic microwave integrated circuits.

• Communications for Statistical Applications and Methods
• /
• v.30 no.6
• /
• pp.577-587
• /
• 2023

Conventional categorical data imputation techniques, such as mode imputation, often encounter issues related to overestimation. If the variable has too many categories, multinomial logistic regression imputation method may be impossible due to computational limitations. To rectify these limitations, we propose a two-stage imputation method. During the first stage, we utilize the Boruta variable selection method on the complete dataset to identify significant variables for the target categorical variable. Then, in the second stage, we use the important variables for the target categorical variable for logistic regression to impute missing data in binary variables, polytomous regression to impute missing data in categorical variables, and predictive mean matching to impute missing data in quantitative variables. Through analysis of both asymmetric and non-normal simulated and real data, we demonstrate that the two-stage imputation method outperforms imputation methods lacking variable selection, as evidenced by accuracy measures. During the analysis of real survey data, we also demonstrate that our suggested two-stage imputation method surpasses the current imputation approach in terms of accuracy.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.10
• /
• pp.48-56
• /
• 2002

A fabrication method of long--period fiber gratings (LPFGs) that can be easily controlled resonance wavelength and losses is introduced. We used the superposition method that core and cladding diameter are modulated by applying a number of small electric-arc to the normal fiber. We derived an equation of resonance wavelength change according to core diameter variation using the phase matching condition and showed the results are well matched with experiments. The measured resonant wavelengths of arc-induced superposition LPFGs according to grating period are well coincident with that of phase matching condition. The resonance wavelength is measured for the temperature changes and a slight mechanical strength degradation of arc-induced LPFGs is observed by increasing arc times.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.2
• /
• pp.800-811
• /
• 2018

This paper presents a regenerative braking control scheme for Switched Reluctance Machine (SRM) drive in Electric Vehicles (EVs). The main purpose is to maximize the recovered energy during battery charging by taking into account the nonlinear physical characteristics of the Switched Reluctance Machine. The proposed regenerative braking method employs the back-EMF in the generation process as a complicated position-dependent voltage source. The proposed maximum power recovery (MPR) operation of the regenerative braking is first based on the maximization of the extracted power from the machine and then the maximization of the power transferred to the battery. The maximum power extraction (MPE) from SRM is based on maximizing the energy conversion ratio by the calculation of the optimum PWM switching duty cycle, turn-on, and turn-off angles. By using the impedance matching theorem that allows the maximum power transfer (MPT) of the MPE, the proposed MPR is achieved. The parametric averaged value modeling of the machine phase currents in the chopping control mode is used for MPR realization. By following this model, a nonlinear equivalent input resistance is derived for the battery internal resistance matching. The effectiveness of the proposed regenerative braking method is demonstrated through simulation results and experimental implementation.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.11
• /
• pp.19-24
• /
• 1992

In this paper, a high frequency method is developed which combines the uniform Geometrical Theory of Diffraction(GTD) and the Aperture Integration(AI) to analyze electromagnetic plane wave scattering by a perfectly-conducting, open-ended, semi-infinite parallel plate waveguide with a uniform layer of absorbing material on its inner wall, and with a slanted planar termination inside. In this method, first, the field of an arbitary point inside the paraller plate waveguide is computed by the GTD. Second, the field scattered into exterior region by the waveguide is found using the equivalent current, which can be obtaind from the aperture field of the waveguide and using the AI. Numerical results based on this GTD method are presented and compared with those based on the mode matching method.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.1
• /
• pp.33-38
• /
• 1994

In this paper, waveguide banpass filters using H-plane step discontinuities are designed based on the field theory analysis and optimization of the resonator lengths as well as dimensions of discontinuities, instead of the conventional synthesis method based on the equivalent circuit. The waveguide inductive obstacles introduced by H-plane step discontinuities analyzed using mode-matching method and the generalized scattering parameters are derived. Using the derived scattering parameters of the discontinuities as well as those of resonators, waveguide bandpass filters are designed through optimization method, modified Razor search method proposed by J.H.Bandler. Using this design procedures, waveguide bandpass filters are designed and tested at X-band(center frequency 10GHz) as well as Ka-band(center frequency 35GHz).

• Journal of Industrial Technology
• /
• v.13
• /
• pp.25-31
• /
• 1993

This paper presents an analysis of microwave device component. An H-Plane waveguide component with arbitrary shape is analyzed using finite element method(FEM) cooperated with boundary element method(BEM). The finite element method(FEM) is applied to the junction region and the boundary element method(BEM) to the waveguide region. For the application of BEM in the waveguide structure, a ray representation of the waveguide Green's function is used. The proposed technique was applied to the analysis of the waveguide inductive junction to compare the numerical result with the result of the mode matching technique. The comparison showed good agreements between the two results. Transmitted powers were also computed in T-junction waveguides for the various shape of the junction area.