• 한국의류학회지
• /
• 제34권9호
• /
• pp.1546-1557
• /
• 2010

This study analyzes the status of foreign direct investment in Korean textiles and fashion firms and investigates the factors determining their performance. A total of 1,251 cases (including 1,116 manufacturers and 135 of distributors from the 2009/2010 Korean Overseas Business Directory published by KOTRA) were used. The results of this study are as follow: 1) In the case of manufacturers, China was the most heavily invested in country, and the Asian region that included China, Vietnam, Indonesia and Bangladesh consisted of 80% total investment. In cases of distributors, China was also the first ranking country and other countries, that included Vietnam, United States, and Japan are major ones. 2) In terms of the foreign entry mode, wholly-owned subsidiaries represented 90% of total cases. As the index of the degree of localization, the ratio of local employees was very high. 3) Different countries were utilized by year, type of business, and area of process. In manufacturers, Indonesia, China, and Vietnam were the most heavily utilized countries in the 1980s, 1990s, and 2000s, respectively. For distributors, China was the major market ill the 1980s and 1990s but Vietnam has emerged as the biggest market in the 2000s. In terms of area of process, China was for manufacturing fibers and fabrics, Vietnam was for most items, Indonesia was for assembly, knit, accessories, and Bangladesh was for embroidery and accessories. 4) The determining factors of the age of foreign business as the proxy index and performance of foreign business entry, were different by the type of business. For manufacturers, four factors including the dollar amount of investment, number of local employees, the mode of foreign direct investment, and entry to China were significant. On the other hand, only two factors including the dollar amount of investment and entry (other than China) were significant distributors.

• Smart Structures and Systems
• /
• 제23권2호
• /
• pp.107-122
• /
• 2019

As one of the most important parameters in structural health monitoring, structural frequency has many advantages, such as convenient to be measured, high precision, and insensitive to noise. In addition, frequency-change-ratio based method had been validated to have the ability to identify the damage occurrence and location. However, building a precise enough finite elemental model (FEM) for the test structure is still a huge challenge for this frequency-change-ratio based damage detection technique. In order to overcome this disadvantage and extend the application for frequencies in structural health monitoring area, a novel method was developed in this paper by combining the cross-model cross-mode (CMCM) model updating algorithm with the frequency-change-ratio based method. At first, assuming the physical parameters, including the element mass and stiffness, of the test structure had been known with a certain value, then an initial to-be-updated model with these assumed parameters was constructed according to the typical mass and stiffness distribution characteristic of shear buildings. After that, this to-be-updated model was updated using CMCM algorithm by combining with the measured frequencies of the actual structure when no damage was introduced. Thus, this updated model was regarded as a representation of the FEM model of actual structure, because their modal information were almost the same. Finally, based on this updated model, the frequency-change-ratio based method can be further proceed to realize the damage detection and localization. In order to verify the effectiveness of the developed method, a four-level shear building was numerically simulated and two actual shear structures, including a three-level shear model and an eight-story frame, were experimentally test in laboratory, and all the test results demonstrate that the developed method can identify the structural damage occurrence and location effectively, even only very limited modal frequencies of the test structure were provided.

• 생명과학회지
• /
• 제13권4호
• /
• pp.375-382
• /
• 2003

본 연구는 콩 cyst 선충 race 14에 대한 저항성 QTLs 구명을 목적으로 한 바 결과를 요약하면 다음과 같다. 1. 회귀분석 결과 30개의 marker들(29 RAPD, 1 RFLP)에서 cyst 선충 race 14의 저항성에 대한 유의성이 인정되었다. 2. MAPMAKER/QTL 분석 결과 2개의 QTL들이 구명되었는데, 이 QTL들은 2개의 linkage groups (LGC-7와 LGC-9)에 위치하였으며, 모두 우성유전 양상을 나타내었다. 3. 다중회귀분석 결과 2개의 marker들($B15^2$와 $H06^1$)로 구성된 조합에서 가장 높은 표현적 변이의 값(22.9%)을 나타내었다. 콩 cyst 선충 rare 14에 대한 표현적 변이를 충분히 설명하기 위해서는 지속적인 QTL 구명 연구가 요구된다.

• Journal of Microbiology and Biotechnology
• /
• 제10권6호
• /
• pp.811-816
• /
• 2000

An antagonistic bacterium PM-1 which strongly inhyibits the growth of Pyricularia oryzae was isolated and identified as paenibacillus macerans. The antifungal substances of the strain PM-1 showed the broad antifungal spectra against P.oryzae races. Relating to the localization test, it was found that the antifungal substances existed not only in the cytoplasm but also in the culture supernatant, and importantly the antifungal activity of the latter was stronger than that of the former. The extracellular antifungal substances were extremely heat-stable up to $121^{\circ}C$ for 15 min. The substances were optimally produced at $20^{\circ}C$ and pH 10.0 in a potato dextrose broth. The culture filtrate of the strain PM-1 caused a partial swelling of the mycelia of P.oryzae, and it prevents the normal growth of the fungus as well. This result suggested that the antifungal substances secreted by the strain PM-1 potentially inhibited the germination of P.oryzae.

• 유통과학연구
• /
• 제18권5호
• /
• pp.71-81
• /
• 2020

Purpose: This case study illustrates the successful entry of Saudi Aramco in the Korean market and how it grows to become one of the world's largest integrated energy enterprises. Research design, data and methodology: This case investigates diverse secondary sources to examine the entry strategy of Aramco in Korea, such as several interviews including public and anonymous dialogues, periodicals, dispatches (i.e. news articles and magazines), annual reports, industrial reports, and others. Results: The main concern for the international strategic approaching of Saudi Aramco is to enter into Korean market by joint venture with SsangYong Oil (today's S-Oil Corporation) in 1991 and finally, ending by Acquisition of S-Oil in 2015. This acquisition of local No.3 company, S-Oil, in Korea is the successful case in Asian Markets overcoming liability of foreignness. Moreover, Saudi Aramco's global distribution strategy through localization in the Korean market is appropriate given the market conditions, timing, effectiveness, and efficiency by sharing their resources and collaborating. Conclusions: It would be valuable, unique, and real story to analyze global leading company's entry and globalization strategy in overseas market. In addition, this study provides decision-makers with a significant and more strategic implication for the overseas expansion of businesses.

• Structural Engineering and Mechanics
• /
• 제65권3호
• /
• pp.223-231
• /
• 2018

A numerical investigation of the impact of steel ductility on the strength and ductility of two-way corner and edge-supported concrete slabs containing low ductility welded wire fabric is presented. A finite element model was developed for the investigation and the results of a series of concurrent laboratory experiments were used to validate the numerical solution. A parametric investigation was conducted using the numerical model to investigate the various factors that influence the structural behavior at the strength limit state. Different values of steel uniform elongation and ultimate to yield strength ratios were considered. The results are presented and evaluated, with emphasis on the strength, ductility, and failure mode of the slabs. It was found that the ductility of the flexural reinforcement has a significant impact on the ultimate load behavior of two-way corner-supported slabs, particularly when the reinforcement was in the form of cold drawn welded wire fabric. However, the impact of the low ductility WWF has showed to be less prominent in structural slabs with higher levels of structural indeterminacy. The load-deflection curves of corner-supported slabs containing low ductility WWF are brittle, and the slabs have little ability to undergo plastic deformation at peak load.

• Applied Biological Chemistry
• /
• 제32권1호
• /
• pp.64-72
• /
• 1989

Near full length cDNA clones encoding the rice seed storage protein, prolamine, were isolated and divided into two homology classes based on cross-hybridization and DNA sequencing analysis. These cDNA clones contain a single open reading frame encoding a putative rice prolamine precursor(M.W.=17,200) possessing atypical 14 amino acid signal peptide. Clones of these two homology classes diverge mainly by insertions/deletions of short nucleotide stretches and point mutations. The deduced primary structures of both types of prolamine polypeptides are devoid of any major tandem repetitive sequences, a feature prevalent in other cereal prolamines. No significant homology teas detected between the rice prolamine and other cereal prolamines, indicating that the rice gene evolved from a different ancestor that gave rise to other cereal prolamine genes. Developing wheat and rice endosperms were examined using ultrathin sections prepared from tissues harvested at various days after flowering. By immunocytochemical localization techniques, wheat prolamines are localized within vesicles from Golgi apparatus and in homogeneous regions of protein bodies. The involvement of the goli apparatus in the packaging of wheat prolamines into protein bodies indicates a pathway which differs from the mode of other cereal prolamines and resembles the mechanism employed for the storage of rice glutelin and legume globulins.

• Journal of Power Electronics
• /
• 제14권5호
• /
• pp.967-979
• /
• 2014

This paper focuses on speed and current sensor fault detection and isolation (FDI) for induction motor (IM) drives. A new, accurate and high-efficiency FDI approach is proposed so that a system can continue operating with good performance even in the presence of speed sensor faults, current sensor faults or both. The proposed three paralleled adaptive observers are capable of current sensor fault detection and localization. By using observers, the rotor flux and rotor speed can be estimated which allows the system to run under the speed sensorless vector control mode when a speed sensor fault occurs. In order to detect speed sensor faults, a threshold-based scheme is proposed. To verify the feasibility and effectiveness of the proposed FDI strategy, experiments are carried out under different conditions based on a dSPACE DS1104 induction motor drive platform.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.237-240
• /
• 2004

High strain-rate deformation behavior of NiAl/Ni micro-laminated composites was characterized by split hopkins on pressure bar(SHPB). When the strain rate increased, the compressive stress of micro-laminated composites were increased a little. When the intermetallic volume fraction increased, the compressive stress of micro-laminated composites increased linearly irrespective of strain rate. Absorbed energy during the quasi-static and SHPB tests was calculated from the integrated area of stress-strain curve. Absorbed energy of micro-laminated composites deviated from the linearity in terms of the intermetallic volume fraction but merged to the value of intermetallic as the strain rate increased. This was due to high tendency of intermetallic layer for the localization of shear deformation at high strain rate. Microstructure showing adibatic shear band(ASB) confirmed that the shear strain calculated from the misalignment angle of each layer increased and ASB width decreased when the intermetallic volume fraction. Simulation test impacted by tungsten heavy alloy cylinder resulted that the absorbed energies multiplied by damaged volume of micro-laminated composites were decreased as the intermetallic volume fraction increased. Fracture mode were changed from delamination to single fracture when the intermetallic volume fraction and this results were good matched with previous results[l] obtained from the fracture tests.

• Bulletin of the Korean Chemical Society
• /
• 제16권11호
• /
• pp.1084-1088
• /
• 1995

A complete solid solution (SrLaAl1-xNixO4) between insulating SrLaAlO4 and metallic SrLaNi(Ⅲ)O4 oxides were prepared under high oxygen pressure (1.5 kbar, 800 ℃). They have tetragonal K2NiF4-type structure in all the solid solution range. Compared with lattice parameters of the same solid solution prepared under normal condition (1 bar, 1200 ℃), large decrease in the c-parameter was induced by high pressure treatment while no noticeable variation of the a-parameter was observed. Although marked changes of structural parameters, magnetic susceptibilities, and electron paramagnetic resonance spectra were consistently occurred before and after x=0.5, overall behaviors were essentially the same with those of solid solution prepared under normal condition. Such a phenomenon is explained by assuming the formation of partially filled narrow σ*x2-y2 band for x>0.5. Lattice contraction along the c-axis by high pressure treatment seems not to broaden this band. Particularly, the continuous absorption characteristic of a high free carrier concentration for x>0.5 and the absence of Ni-O in-plane stretching mode in the infrared absorption spectra supports this picture. However, the conductivities increasing with temperature for all solid solution suggest that some localization character, of probably Anderson type, remains for x>0.5.