• 한국정보통신학회논문지
• /
• 제8권3호
• /
• pp.523-528
• /
• 2004

기존의 고정 위성 서비스(FSS: fixed satellite service)에 할당된 27.5 ∼ 28.35GHz 대역 및 31.0 ∼ 31.3GHz 대역이 WRC-2000에서 성층권 무선 중계 시스템에 할당됨에 따라 FSS/GSO 시스템과 FS/HAPS 시스템간의 간섭 영향 분석이 필요하다. 이러한 간섭 분석에 있어서는 주파수 운용 조건을 크게 Reverse mode와 Forward mode로 구분하여 간섭 분석 모델을 설정해야 한다. 이에 본 논문에서는 FSS/GSO 시스템과 FS/HAPS 시스템간의 간섭 영향을 Forward mode를 고려하여 다수의 GSO 위성들에 의한 HAPS 지상국에 미치는 간섭 영향으로서 I/N 기준 값, HAPS 커버리지 위도, 위성 간격 등에 따른 간섭 평가를 행하였다. 한편, 이러한 간섭의 영향을 줄이기 위해서는 주파수 운용 조건을 Reverse mode로 고려하거나 적절한 간섭 경감 기법을 도입해야 할 것으로 보인다.

• Steel and Composite Structures
• /
• 제26권2호
• /
• pp.241-253
• /
• 2018

Mode II fracture toughness, $K_{IIC}$, of single-ply triaxially woven fabric (TWF) composite due to tow waviness and anisotropy effects were numerically and experimentally studied. The numerical wavy beam network model with anisotropic material description denoted as TWF anisotropic was first validated with experimental Mode II fracture toughness test employing the modified compact tensile shear specimen configuration. 2D planar Kagome and TWF isotropic models were additionally constructed for various relative densities, crack lengths, and cell size parameters for examining effects due to tow waviness and anisotropy. $K_{IIC}$ generally increased with relative density, the inverse of cell size, and crack length. It was found that both the waviness and anisotropy of tow inflict a drop in $K_{IIC}$ of TWF. These effects were more adverse due to the waviness of tow compared to anisotropy.

• 한국안전학회지
• /
• 제31권5호
• /
• pp.7-15
• /
• 2016

The purpose of this paper is to carry out Failure Modes and Effects Analysis (FMEA) and use criticality in order to determine risk priority number of the components of electric power installations in Engineering college building of D university. In risk priority number, GROUP A had 7 failure modes; more specifically, Transfomer had 4 modes, Filter(C)(1 mode), LA(1 mode), and CB(MCCB)(1 mode), and thus 4 components had failure modes. In terms of criticality, high-grade group a total of 16 failure modes, and 7 components-LA(1 mode), CB(MCCB)(1 mode), MOF(2 modes), PT(1 mode), Transformer(7 modes), Cable(3 modes), and Filter(C)(1 mode)-had failure modes. Comparison of risk priority number and criticality was made. The components which had high risk priority number and high criticality were Transformer, Filter(C), LA, and CB(MCCB). The components which had high criticality were MOF and cable. In particular, Transformer(RPN: 4 modes, Criticality: 7 modes) was chosen as an intensive management component.

• Wind and Structures
• /
• 제31권5호
• /
• pp.403-418
• /
• 2020

To investigate the effects of central buckles on the dynamic behavior and flutter stability of long-span suspension bridges, four different connection options between the main cable and the girder near the mid-span position of the Aizhai Bridge were studied. Based on the flutter derivatives obtained from wind tunnel tests, formulations of self-excited forces in the time domain were obtained using a nonlinear least square fitting method and a time-domain flutter analysis was realized. Subsequently, the influences of the central buckles on the critical flutter velocity, flutter frequency, and three-dimensional flutter states of the bridge were investigated. The results show that the central buckles can significantly increase the frequency of the longitudinal floating mode of the bridge and have greater influence on the frequencies of the asymmetric lateral bending mode and asymmetric torsion mode than on that of the symmetric ones. As such, the central buckles have small impact on the critical flutter velocity due to that the flutter mode of the Aizhai Bridge was essentially the symmetric torsion mode coupled with the symmetric vertical mode. However, the central buckles have certain impact on the flutter mode and the three-dimensional flutter states of the bridge. In addition, it is found that the phenomenon of complex beat vibrations (called intermittent flutter phenomenon) appeared in the flutter state of the bridge when the structural damping is 0 or very low.

• 대한한방소아과학회지
• /
• 제14권2호
• /
• pp.1-32
• /
• 2000

It has long been known that SOAT is effective for sudden palpitation occurring unexpectedly in Oriental Medicine. However, effect of SOAT on the isolated heart has not been studied yet. The purpose of this study is to investigate the effect of SOAT on hemodynamics and ECG of isolated rat hearts induced by electrical stimulation using Langendorff perfusion apparatus for nonworking heart. SOAT extract was manufactured by water-alcohol precipitated method. Sprague-Dawley rats weighting $120{\sim}150g$ were used for the experiments, Subject animals were divided into four groups, which are consisted of 1) control(Group orally administered by normal saline 1ml for 14days), 2) sample A(Group orally administered by SOAT extract 1ml for 14days), 3) sample C(Group injected by SOAT extract 0.5ml after stimulation, 4) sample C(Group injected by SOAT extract 1ml after stimulation. To evluate the effects of SOAT on hemodynamics and ECG of isolated rat heart induced by stimulation, heart rate, left ventricular pressure, systolic power, diastolic power, coronary artery perfusion volume and ECG were measured using Langendorff apparatus in both stimulation mode(5 volts, 450 beats/min) and arrythmic mode(5 volts, 420 beats/min including 60 beats/min) The results obtained are as follows : 1. After receiving stressful electrical stimuli, isolated heart showed the heart rate, left ventricular pressure, systolic power, diastolic power, coronary artery perfusion volume were all decreased temporarily, but perfusion continued longer recovery to the control state appeared. However, the coronary artery perfusion volume diminished continuously. 2. The heart rates did not change significantly with both stimulation mode and arrhythmic mode, among experimental groups. 3. The left ventricular pressure showed with both stimulation mode and arrhythmic mode, the significant changes(p<0.05) especially in the injection sample group. In case of stimulation mode, low concentration injection group(0.5ml) was more significantly increased rather than high concentration group(1ml) and in case of arrhythmic mode, high density group(1ml) was so increased than the other(0.5ml). 4. For the systolic power and diastolic power, no significant changes were noticed in the stimulation mode, but in the arrhythmic mode of injection sample groups, significant change(p<0.05) was noticed in both systolic power and diastolic power. Specially the high concentration group(1ml) showed more significant increase than the low concentration group. 5. For the coronary artery perfusion volume, no significant change difference among sample groups was observed in both the stimulation mode and the arrhythmic mode. 6. For the ECG recordings, arrhythmia was induced by electrical stimulus of arrythmia mode and after the stimulus was removed, irregular wave appeared temporarily, but as perpusion continued, recovery to the control state was abtained like the stimulation mode. According to the above results, SOAT significantly changed the hemodynamic data from the electrically stressed, isolated hearts of connected Langendorff perfusion apparatus and we propose SOAT has the direct effects on the muscular function of heart.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1991년도 제6회 파동 및 레이저 학술발표회 Prodeedings of 6th Conference on Waves and Lasers
• /
• pp.102-108
• /
• 1991

Utilizing self-phase modulation effects of a dispersion-shifted fiber and delay-line characteristics of two gratings, mode-locked 80 ps pulses at 1.319${\mu}{\textrm}{m}$ wavelength from a Nd: YAG laser are compressed down to 2.1 ps. These pulses are further compressed down to 340 fs using higher order soliton effects in a common single mode fiber.

• 농촌계획
• /
• 제10권1호
• /
• pp.41-55
• /
• 2004

The purpose of this study is to investigate a causal relationship between the mode of production and change of rural society. While dominant theories of social change have stressed variation of contingencies and periodical contexts, this theoretical paper drives a new insight paralleling diverse theoretical arguments of each mode of production with rural and urban changes. Investigating the drifts of intellectual ideologies of the mode of production, we get through diverse paradigm shifts of the production accumulation and its trigger effects on rural change. More specifically, the present study investigates change of rural society by way of investigating such fluctuations of societal changes as ancient society, slavery society, feudal society, industrial society, post-industrial society, and information society. We find that transportation and communication technologies have had a key role in the changes, however, the effects of the technologies on social changes have been different between rural- and urban-society. While we take it for granted that flexible accumulation in post-industrial society and time-space compression and informatization in information society will reduce developmental gap between rural- and urban-society, we also found that there have been big differences of actual application of the technologies between theory and reality in each era of mode of production.

• ETRI Journal
• /
• 제32권5호
• /
• pp.687-694
• /
• 2010

Breaks in presence (BIP) are those moments during virtual environment (VE) exposure in which participants become aware of their real world setting and their sense of presence in the VE becomes disrupted. In this study, we investigate participants' experience when they encounter technical anomalies during game play. We induced four technical anomalies and compared the BIP responses of a navigation mode game to that of a combat mode game. In our analysis, we applied a linear mixed model (LMM) and compared the results with those of a conventional regression model. Results indicate that participants felt varied levels of impact and recovery when experiencing the various technical anomalies. The impact of BIPs was clearly affected by the game mode, whereas recovery appears to be independent of game mode. The results obtained using the LMM did not differ significantly from those obtained using the general regression model; however, it was shown that treatment effects could be improved by consideration of random effects in the regression model.

• Structural Engineering and Mechanics
• /
• 제58권2호
• /
• pp.217-230
• /
• 2016

Effects of temperature dependent material properties on mixed mode fracture parameters of functionally graded materials subjected to thermal loading are investigated. A domain form of the $J_k$-integral method including temperature-dependent material properties and its numerical implementation using finite element analysis is presented. Temperature and displacement fields are calculated using finite element analysis and are used to compute mixed mode stress intensity factors using the $J_k$-integral. Numerical results indicate that temperature-dependency of material properties has considerable effect on the mixed-mode stress intensity factors of cracked functionally graded structures.

• 전자공학회논문지SC
• /
• 제40권6호
• /
• pp.1-7
• /
• 2003

본 논문은 비선형 시스템에서 시스템의 출력이 주기적인 특징을 가지는 궤적을 따라가도록 하는 슬라이딩 모드 반복 제어기를 소개한다. 본 논문에서 제안하는 제어기는 전체 시스템을 안정화시키며 출력오차를 어떤 범위 안으로 지수적으로 수렴시키는 슬라이딩 모드 제어기와 추적 오차의 수렴을 위해서 사용되는 반복 제어기로 구성되어 있다. 본 논문에서는 제안하는 슬라이딩 모드 제어기는 기존의 방법과는 다르게 제어입력의 크기가 추적오차의 크기에 비례하게 되어 있어서 시스템의 차수를 올리지 않고 정상상태에서의 채터링(chattering) 문제를 크게 개선하는 특징을 가지고 있다.