• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.79-82
• /
• 2000

본 논문에서는 Re-entrant mode 결합기를 이용하여 결합도가 향상된 다층 마이크로스트립 구조 결합기를 제안하였다. 제안된 구조는 결합이 이루어지는 두 전성선로의 위층, 아래층 양면에 부동 도체를 위치시킨 형태이며, 이는 기 모드 정전용량의 증가로 인해 높은 결합도를 얻을 수 있고 각 모드별 유효 유전율의 차이가 크지 않기 때문에 정재파비, 격리도, 위상차등에서도 향상된 특성을 얻을 수 있다. 따라서 이는 강한 결합이 필요한 다단 결합기나 광대역 결합기에 사용될 수 있다. 제안된 결합기의 설계를 위해 우 기 모드 해석 방법을 이용하여 임피던스, 유효 유전율, 결합계수 등을 계산하였으며 시뮬레이션과 제작을 통해 이의 타당성을 확인하였다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.371-375
• /
• 2001

The tool wear that is developed by long-term machining in mold manufacturing with machining center makes a severe influence to the accuracy and the surface roughness. In this reason, tool-wear supervising system which has guaranteed high accuracy and high speed is needed to improve the measurement quality. Touching probe and touch sensor are widely used to measure the tool profile at on-machine measurement. In this paper, using the newly developed electric touch point measuring system, the Automatic Tool Compensation System is developed to correct the error of tool diameter resulted from the wear, and the operating method of this system is also provided.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.4
• /
• pp.48-54
• /
• 2001

The tool wear that is developed by long-term machining in mold manufacturing with machining center makes a severe influence to the accuracy and the surface roughness. in this reason, tool-wear supervising system which has guaranteed high accuracy and high speed is needed to improve the measurement quality. Touching probe and touch sensor are widely used to measure the tool profile at on-machine measurement. In this paper, using the newly developed electric touch point measuring system, the Automatic Tool Compensation System is developed to correct the error of tool diameter resulted from the wear, and the operating method of this system is also provided.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.445-449
• /
• 2001

The tool wear that is developed by long-term machining in mold manufacturing with machining center makes a severe influence to the accuracy and the surface roughness. In this reason, tool-wear supervising system which has guaranteed high accuracy and high speed is needed to improve the measurement quality. Touching probe and touch sensor are widely used to measure the tool profile at on-machine measurement. In this paper, using the newly developed electric touch point measuring system, the Automatic Tool Compensation System is developed to correct the error of tool diameter resulted from the wear, and the operating method of this system is also provided.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.131-135
• /
• 2003

WDM(Wavelength division multiplexing) light wave communication system requires MUX/DeMUX and optical filter OADM can be used to extract and add the specific wavelength channel from the transmission line. In this paper, we propose the OADM based on MZI and cascade FBG. It is able to minimize system and reduce sidelobe. So, we have considered MZI structure and 3dB coupler. Using the coupled mode theory. We also analyze out characteristics of OADM and experiment. From results obtained by experiment and computer. Simulation, the proposed OADM with cascade FBG works well. we hope that the obtained result in this paper con be used as the data to design the OADM with cascade FBG.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.1E
• /
• pp.5-10
• /
• 1994

It is obtained the general expessions of the numerical method are applied for the TEM-mode analysis of multu-layer multi-coupled microstrip lines, In this paper, coupled microstrip are replaced by three-coupled microstrip lines in special aplications. Three-layer versions of three-coupled microstrip lines are specially attactive because of the additional flexibilities offered by three-layer configuration. This structure can be used for obtaining large capacitance and preventing coupling among microstrip lines in filter and coupler. Sappihre is chosen for anisotropic substrates material. The permittivity parallel to the optical axis is higher than the permittivity in the plane perpendicular to this axis.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.792-796
• /
• 2003

In this paper, to detect external sound frequency on the latticed structure, fiber optic sensor net using Sagnac interferometer was fabricated and tested. The latticed structure fabricated with dimension of 50cm in width and 50cm in height, the optical fiber, 50m in length, distributed and fixed on the latticed structure. Single mode fiber, a laser with 1,550nm in wavelength, 2${\times}$2 coupler were used. External sound signal applied to the fiber optic sensor net and the detected optical signals were compared and analyzed to the detected microphone signals against time and frequency domain. Based on the experimental results, fiber optic sensor net using Sagnac interferometer detected external sound frequency, effectively. This system can be expanded to the structural health monitoring system.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2089-2092
• /
• 1999

Partial discharge(PD) tests were performed both when the pumped storage generator(rated 13.8kV and 220MVA) was on-line and off-line. This generator has been equipped with 12 bus coupler sensors in directional mode. PD tests were conducted using partial discharge analyzer(PDA), partial discharge meter(PDM) and digital partial discharge detector. PDA showed that the patterns of the normalized quantity number(NQN) and the partial discharge magnitude are in accord with on-line and off-line. The insulation condition was estimated by diagnostic tests(off-line) such as PD magnitude and dissipation factor.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.3
• /
• pp.83-90
• /
• 2009

This paper presents the design and measurement of a flight model for a Ku-Band Linearized Channel Amplifier. All MMICs, Variable Gain Amplifier (VGA), Variable Voltage Attenuator ('.IVA), Branch line Coupler and Detector for Pre-distorter are fabricated using a Thin-Film Hybrid process. The performance of the fabricated module is verified through the radio frequency circuit simulation tool and electrical function test in space environment.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.6
• /
• pp.26-33
• /
• 1994

Much time and labor has been conventionally paid for fine adjustment of circuit elements by experience to improve the characteristics of Tap-off for CATV systems. To solve the problem, in this paper, the relations between the even- and odd-mode impedance. Z$_{oe}$ and Z$_{oo}$ of symmetrical 4-port coupled-line directional coupler and power dividing characteristics of Tap-off for CATV system have been derived. After the coupling, the reflectivity and the isolation are represented by Z$_{oe}$ and Z$_{oo}$ only, the fine adjustment of all S-parameters can be performed by controling the elements of Z$_{oe}$ and Z$_{oo}$ only. Furthermore, the validity of the new fine adjustment method proposed here has been confirmed by experiments.