• Journal of Animal Environmental Science
• /
• v.4 no.1
• /
• pp.1-8
• /
• 1998

The objective of this study was conducted to develope a mobile pig nursery(MPN) for segregation of early weaned piglet. The units of MPN was consisted of 4 rectangle-type pens, 1 workroom, 2 doors, 3 windows, 1 air-inlet, 1 exhaust fan, and 1 cooling and heating system. Total of 40 piglet were weaned at 7 days of age. The period of the feeding test was 63 days. The results obtained are as follows: 1. The insulation thickness was 70, 70 and 50 mm of roof, floor and wall, respectively. R-value was 15.32 and 10.32 of roof and wall, respectively. 2. Exhaust fan( 30.48) was installed near back door 40cm from the bottom. When exhaust fan speeds were 15, 20, 30 and 35%, Air ventilation was required 9.75, 7.07, 1.72, 1.45 minutes of respectively. 3. Average temperature in the MPN was able to maintain 27∼28$^{\circ}C$ from 7∼28 days of age, 24∼25$^{\circ}C$ from 35∼56 days of age and 20∼21.5$^{\circ}C$ from 56∼70 days of age. 4. Average daily gain, feed intake and feed conversion were 420.6g, 761.5g, 1.81 respectively.

• Knowledge Management Research
• /
• v.20 no.4
• /
• pp.149-168
• /
• 2019

In the era of the Fourth Industrial Revolution, digital transformation is emerging in the education and learning fields. As the use of the mobile Internet and mobile devices has become a daily life, mobile learning that supports a variety of learning in a mobile environment is drawing attention. Mobile learning applications (apps) are expected to expand their use by providing a convenient learning environment anytime, anywhere. This study investigates the use of mobile learning apps in English education, which is one of the most popular learning areas, and empirically examines the factors that influence the continuous use of mobile learning apps. In particular, it analyzes the differences between Chinese and Korean users. The results of this study provide theoretical and practical implications to promote the development of mobile apps suitable for mobile learning environments and the sustainable user growth in mobile learning.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.19-22
• /
• 2003

This paper proposes an algorithm for navigation of an autonomous mobile robot with vision sensor. For obstacle avoidance, we used a curvature trajectory method. Using this method, translational and rotational speeds are controlled independently and the mobile robot traces a smooth curvature trajectory that consists of circle trajectories to a target point. While trying to avoid obstacles, the robot fan be goal-directed using curvature trajectory.

• Journal of the Korean Geophysical Society
• /
• v.7 no.2
• /
• pp.135-149
• /
• 2004

The present time is wanted quickness corretness position so as having more and more concern about present my position AS a doncing fan the intrenet marketed of fornation and recongnition about spatial generel is changed now is opening that present my position is where? to questing is answering through smaller (Mobile Device : Mobile Phone, PDA, GPS) then palm of the hand like this background, we know about that what is LBS?, service commercial of LBS SUCH embodiment practical use and possibilities of the future!!

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.11-14
• /
• 2003

In this paper, we use Fuzzy Logic and Potential field method for optimal path planning of an autonomous mobile robot and apply to navigation for real-time mobile robot in 2D dynamic environment. For safe navigation of the robot, we use both Global and Local path planning. Global path planning is computed off-line using sell-decomposition and Dijkstra algorithm and Local path planning is computed on-line with sensor information using potential field method and Fuzzy Logic. We can get gravitation between two feature points and repulsive force between obstacle and robot through potential field. It is described as a summation of the result of repulsive force between obstacle and robot which is considered as an input through Fuzzy Logic and gravitation to a feature point. With this force, the robot fan get to desired target point safely and fast avoiding obstacles. We Implemented the proposed algorithm with Pioneer-DXE robot in this paper.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.5-8
• /
• 2018

Recently, global warming and tropical nights have caused the use of electric fans to explode. Under these circumstances, running the fan for long periods of time is not only a risk of explosion due to overloading the power but also a small amount of electricity and environmental pollution. Therefore, the research was conducted to develop devices that automatically turn fans on and off according to room temperature, reducing the risk of explosion as well as saving energy. This study suggested that electric fans turn on and off automatically and display temperature in mobile applications. The ability to turn on and off allows the fan to turn on itself if the indoor temperature rises above a certain level. Conversely, if the indoor temperature drops below a certain level, the fan should be turned off. Second, the temperature display function checks indoor temperature through mobile applications. The automatic on/off capabilities proposed in this study could contribute to reducing the risk of explosion and saving energy. However, if the indoor temperature rises above a certain temperature even though there is no one inside, the fan can be turned on. The expectation from this study is that the ability of fans to operate and turn off at appropriate temperatures can reduce the risk of explosion, electrical charges, and environmental pollution.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.32-35
• /
• 2019

One of the major problems with the livestock industry is that in the summer, livestock will die from heat waves or infectious diseases. Under these circumstances, what livestock need is a proper indoor temperature and a regular sterilization system. Therefore, in this study, we developed a system that automatically controls the power of the fan according to the temperature inside the shaft, and a function that provides feed and sterilization on a regular basis, so that we could manage the toast efficiently. It also proposed the ability to automatically control the power of the fan, to display the temperature inside the shaft to mobile applications, and to provide food and sterilization. First, the function of controlling the power of the fan automatically turns the fan on when the temperature inside the shaft rises above a certain level. Conversely, if the temperature inside the shaft falls below a certain level, turn off the fan. Second, the function of the mobile application is to check the temperature inside the shaft. The third feeding function is periodically fed using a servo motor, and the feeding provided is delivered to livestock through a conveyor belt. Finally, the sterilization function is a function to sterilize livestock periodically using DC motor pump. The intelligent congratulatory functions proposed in this study may contribute to the health of livestock.

• Proceedings of the Korea Contents Association Conference
• /
• 2010.05a
• /
• pp.517-519
• /
• 2010

iphone이 가져다주는 핸드폰 사용자의 체험, 제일 처음으로 제일 많은 스마트폰 시스템 windows mobile의 개명, 새로운 개방적인 스마트폰 시스템 android의 출시, 스마트폰 및 그의 인터페이스 디자인이 가져온 새로운 사용자 체험은 사람들의 눈길을 끄는 화제로 되었습니다. 핸드폰 시장에서 스마트폰의 지위가 날이 갈수록 중요해 짐에 따라, iphone이 가져다주는 핸드폰 사용자의 체험, 제일 처음으로 제일 많은 스마트폰 시스템 windows mobile의 개명, 새로운 개방적인 스마트폰 시스템 android의 출시, 스마트폰 및 그의 인터페이스 디자인이 가져온 새로운 사용자 체험은 사람들의 눈길을 끄는 화제로 되었습니다. 본문에서는 최신 발표한 Windows Mobile시스템의 WPhone7와 Iphone의 핸드폰 인터페이스를 사용하는데 대하여 비교하고 분석하여 미래 핸드폰 인터페이스의 발전 방향과 사용자의 요구 방향에 대하여 탐구 하였습니다.

• Journal of Biosystems Engineering
• /
• v.40 no.2
• /
• pp.102-109
• /
• 2015

Purpose: Slow manual harvesting of rain-fed chickpeas cultivated in fallow fields in developing countries have encouraged the design of a mechanical harvester. Methods: A tractor-pulled harvester was built, in which a modified stripper header detached pods from an anchored plant and a chain conveyor transferred material. The stripper harvester was redesigned to use: 1) the maneuverability of tractor-mounted frames, 2) the adaptability of floating headers, and 3) the flexibility of pneumatic conveyors. Results: A mobile vacuum conveyor, which was an innovator open system, was designed for the dilute phase transferring mode for both grain and material other than grain. A centrifugal fan transferred harvested material to a cyclone separator that settled harvested material in a grain tank 1 m high. The machine at the spot work rate of $0.42ha{\cdot}h^{-1}$ harvested chickpea pods equal to the output of 16.6 farm laborers. Conclusion: The low cost and reasonable projected purchase price are the advantages of the concept. Additionally, the shattering loss reduction confirms the feasibility of the prototype chickpea harvester for commercialization.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.9
• /
• pp.4329-4348
• /
• 2019

Mobile cloud computing (MCC) can offload heavy computation from mobile devices onto nearby cloudlets or remote cloud to improve the performance as well as to save energy for these devices. Therefore, it is essential to consider how to achieve efficient computation offloading with constraints for multiple users. However, there are few works that aim at multi-objective problem for multiple users. Most existing works concentrate on only single objective optimization or aim to obtain a tradeoff solution for multiple objectives by simply setting weight values. In this paper, a multi-objective optimization model is built to minimize the average energy consumption, time and cost while satisfying the constraint of bandwidth. Furthermore, an improved multi-objective optimization algorithm called D-NSGA-II-ELS is presented to get Pareto solutions with better convergence and diversity. Compared to other existing works, the simulation results show that the proposed algorithm can achieve better performance in terms of energy consumption, time and cost while satisfying the constraint of the bandwidth.