• 제목/요약/키워드: mobile MIMO OFDM systems

검색결과 19건 처리시간 0.022초

Null 부반송파를 갖는 MIMO-OFDM에서 채널 예측 기반적응 채널 추적 방식 (Channel Prediction based Adaptive Channel Tracking cheme in MIMO-OFDM Systems with Null Sub-carriers)

  • 전형구
    • 한국통신학회논문지
    • /
    • 제32권5C호
    • /
    • pp.556-564
    • /
    • 2007
  • 본 논문에서는 다중 채널 레이리 페이딩으로 인하여 발생하는 시변 채널 환경에서 효율적으로 채널을 추적할 수 있는 방식을 제안하였다. 제안된 적응 채널 추적 방식은 채널 변화를 추정하여 채널을 예측할 수 있으며 예측된 채널 응답을 이용하여 주파수 영역에서 다른 안테나로부터 수신되는 간섭 신호를 제거한다. 그 후 AWGN 성분을 줄이기 위하여 시간영역 채널 추정을 수행한다. 제안된 방식의 장점은 매 심벌 마다 채널 추적시 역행렬을 구할 필요가 없다. 시뮬레이션 결과는 기존의 채널 추적 방식보다 시변 채널 환경에서 더 나은 성능을 보였다. 도플러 주파수 300 Hz, BER = 10-3 조건에서 기존의 Li 방식 보다 약 2.5 dB 성능이 개선되었다. 도플러 주파수 600 Hz에서 기존 방식과 제안된 방식의 성능 차이는 더욱 커졌다.

주파수 선택성 레일라이 페이딩 환경에서 STBC-OFDM 시스템의 성능 비교, 분석 (A Comparative Performance Analysis of STBC-OFDM Systems Under Frequency-Selective Rayleigh Fading Environments)

  • 이상호;정호철;박형래;김종호
    • 한국항행학회논문지
    • /
    • 제8권2호
    • /
    • pp.144-154
    • /
    • 2004
  • 본 논문에서는 4세대 이동통신시스템의 핵심 기술인 Space-Time Block Code (STBC)를 OFDM 시스템에 적용하고 주파수 선택적 레일라이 페이딩 환경에서 각 방식의 성능을 시뮬레이션을 통해서 비교, 분석한다. 먼저 주요 STBC 방식들의 신호 모델과 각 방식별로 복조과정을 유도한다. 또한, 이동통신 환경을 고려하여 OFDM 시스템 파라메타를 설정하고 2bps/Hz에서 4bps/Hz 까지의 전송율에 대해 STBC 방식별로 적절한 변조방식을 설정하여 각각의 전송속도에 대해 STBC-OFDM 방식들의 성능을 컴퓨터 시뮬레이션을 통해 비교, 분석한다. 이 밖에, 각 STBC-OFDM 방식들이 동일한 변조방식을 사용할 경우에 대해서도 성능을 비교, 분석한다.

  • PDF

DVB-T2 16K LDPC 부호가 적용된 MIMO-OFDM 시스템에서의 성분 맞교환 기술 이득 (On the Gain of Component-Swapping Technique with DVB-T2 16K LDPC Codes in MIMO-OFDM Systems)

  • 전성호;임중곤;경일수;김만식
    • 방송공학회논문지
    • /
    • 제15권6호
    • /
    • pp.749-756
    • /
    • 2010
  • 신호 공간 다이버시티 기술은 차세대 모바일 방송의 핵심 전송 기술로 주목받고 있는 기술 중 하나이다. 기존의 DVB-T2에 사용되는 Cyclic Q-delay 방식을 MIMO 시스템에 사용할 경우에는 심볼 간 상호 의존성이 증가하여 수신기 복잡도가 크게 증가하는 반면, 이러한 문제를 해결하기 위해서 제안된 '성분 맞교환(Component-Swapping)' 기술을 적용할 경우 상호 의존성이 제한되어 수신기 복잡도가 크게 줄어든다. 본 논문에서는 DVB-T2 16K LDPC 부호를 적용한 경우에 제안된 '성분 맞교환' 기술을 컴퓨터 시뮬레이션을 통해서 분석하고, 기존 기술 대비 BER 성능 및 복잡도 면에서 이득을 가짐을 확인하였다.

A 2×2 MIMO Spatial Multiplexing 5G Signal Reception in a 500 km/h High-Speed Vehicle using an Augmented Channel Matrix Generated by a Delay and Doppler Profiler

  • Suguru Kuniyoshi;Rie Saotome;Shiho Oshiro;Tomohisa Wada
    • International Journal of Computer Science & Network Security
    • /
    • 제23권10호
    • /
    • pp.1-10
    • /
    • 2023
  • This paper proposes a method to extend Inter-Carrier Interference (ICI) canceling Orthogonal Frequency Division Multiplexing (OFDM) receivers for 5G mobile systems to spatial multiplexing 2×2 MIMO (Multiple Input Multiple Output) systems to support high-speed ground transportation services by linear motor cars traveling at 500 km/h. In Japan, linear-motor high-speed ground transportation service is scheduled to begin in 2027. To expand the coverage area of base stations, 5G mobile systems in high-speed moving trains will have multiple base station antennas transmitting the same downlink (DL) signal, forming an expanded cell size along the train rails. 5G terminals in a fast-moving train can cause the forward and backward antenna signals to be Doppler-shifted in opposite directions, so the receiver in the train may have trouble estimating the exact channel transfer function (CTF) for demodulation. A receiver in such high-speed train sees the transmission channel which is composed of multiple Doppler-shifted propagation paths. Then, a loss of sub-carrier orthogonality due to Doppler-spread channels causes ICI. The ICI Canceller is realized by the following three steps. First, using the Demodulation Reference Symbol (DMRS) pilot signals, it analyzes three parameters such as attenuation, relative delay, and Doppler-shift of each multi-path component. Secondly, based on the sets of three parameters, Channel Transfer Function (CTF) of sender sub-carrier number n to receiver sub-carrier number l is generated. In case of n≠l, the CTF corresponds to ICI factor. Thirdly, since ICI factor is obtained, by applying ICI reverse operation by Multi-Tap Equalizer, ICI canceling can be realized. ICI canceling performance has been simulated assuming severe channel condition such as 500 km/h, 8 path reverse Doppler Shift for QPSK, 16QAM, 64QAM and 256QAM modulations. In particular, 2×2MIMO QPSK and 16QAM modulation schemes, BER (Bit Error Rate) improvement was observed when the number of taps in the multi-tap equalizer was set to 31 or more taps, at a moving speed of 500 km/h and in an 8-pass reverse doppler shift environment.

A New Fuzzy Key Generation Method Based on PHY-Layer Fingerprints in Mobile Cognitive Radio Networks

  • Gao, Ning;Jing, Xiaojun;Sun, Songlin;Mu, Junsheng;Lu, Xiang
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제10권7호
    • /
    • pp.3414-3434
    • /
    • 2016
  • Classical key generation is complicated to update and key distribution generally requires fixed infrastructures. In order to eliminate these restrictions researchers have focused much attention on physical-layer (PHY-layer) based key generation methods. In this paper, we present a PHY-layer fingerprints based fuzzy key generation scheme, which works to prevent primary user emulation (PUE) attacks and spectrum sensing data falsification (SSDF) attacks, with multi-node collaborative defense strategies. We also propose two algorithms, the EA algorithm and the TA algorithm, to defend against eavesdropping attacks and tampering attacks in mobile cognitive radio networks (CRNs). We give security analyses of these algorithms in both the spatial and temporal domains, and prove the upper bound of the entropy loss in theory. We present a simulation result based on a MIMO-OFDM communication system which shows that the channel response characteristics received by legitimates tend to be consistent and phase characteristics are much more robust for key generation in mobile CRNs. In addition, NIST statistical tests show that the generated key in our proposed approach is secure and reliable.

Inter-Cell Interference Management for Next-Generation Wireless Communication Systems

  • Kwon, Ho-Joong;Ko, Soo-Min;Seo, Han-Byul;Lee, Byeong-Gi
    • Journal of Communications and Networks
    • /
    • 제10권3호
    • /
    • pp.258-267
    • /
    • 2008
  • In this paper, we examine what changes the next-generation wireless communication systems will experience in terms of the technologies, services, and networks and, based on that, we investigate how the inter-cell interference management should evolve in various aspects. We identify that the main driving forces of the future changes involve the data-centric services, new dynamic service scenarios, all-IP core access networks, new physical-layer technologies, and heavy upload traffic. We establish that in order to cope with the changes, the next-generation inter-cell interference management should evolve to 1) set the objective of providing a maximal data rate, 2) take the form of joint management of power allocation and user scheduling, 3) operate in a fully distributed manner, 4) handle the time-varying channel conditions in mobile environment, 5) deal with the changes in interference mechanism triggered by the new physical-layer technologies, and 6) increase the spectral efficiency while avoiding centralized coordination of resource allocation of the users in the uplink channel.

IEEE 802.16e Mobile WiMax 시스템을 위한 효율적인 FFT 프로세서 설계 (Design of Efficient FFT Processor for IEEE 802.16e Mobile WiMax Systems)

  • 박윤옥;박종원
    • 한국인터넷방송통신학회논문지
    • /
    • 제10권2호
    • /
    • pp.97-102
    • /
    • 2010
  • 본 논문에서는 IEEE 802.16e mobile WiMax 시스템을 위한 효율적인 FFT 프로세서 구조를 제안한다. 제안된 scalable FFT/IFFT 프로세서는 128/512/1024/2048-point FFT 연산을 가변적으로 수행할 수 있다. 또한 mixed radix (MR) 기법과 multi- path delay commutator (MDC) 구조를 사용하여 비단순 승산을 줄임으로써 기존의 설계 구조에 비해 시스템 수율 변화 없이 하드웨어 복잡도를 크게 감소시켰다. 제안된 scalable FFT/IFFT 프로세서는 하드웨어 설계 언어 (HDL)를 이용하여 설계 되었고, 0.18um CMOS 스탠다드 셀 라이브러리를 이용하여 논리 합성되었다. 논리 합성 결과 4채널 radix-2 MDC (R2MDC) FFT 프로세서와 비교시 16% 감소된 게이트 수와 27% 감소된 메모리로 구현 가능함이 확인되었다.

고속 이동 통신 시스템을 위한 페이딩 예측기반 송신 전력 제어 (A Transmit Power Control based on Fading Channel Prediction for High-speed Mobile Communication Systems)

  • 황인관;이상국;류인범
    • 한국통신학회논문지
    • /
    • 제34권1A호
    • /
    • pp.27-33
    • /
    • 2009
  • 본 논문에서는 고속 이동성을 갖는 통신 시스템에서 회귀 신경망을 기반으로 한 페이딩 신호 예측 기법을 제안하고, 이를 이용한 송신 전력 제어를 제안하였다. 회귀 신경망의 연산 결과를 해석적으로 도출하여, 신경망 특유의 회로 복잡도 문제를 해결하고, 연산된 채널 예측치를 이용하여 최대비 결합(maximum ratio combining)방식으로 여러 개의 송신 안테나에 대하여 채널 이득을 산출하고, 이 산출된 값으로 송신 안테나 각각에 대한 송신 전력을 제어하였다. 모의 실험 결과 채널 예측 기반 전력 제어를 하지 않은 것에 비해 쥐어난 성능을 나타냄을 보여준다. 기존의 대부분의 연구들이 페이딩 신호에 강인한 수신기술에 대하여 연구를 하였거나 페이딩 신호에 대한 채널 예측도 저속의 이동성에 국한되어진 것에 비하여, 제안된 채널예측 방법은 개회로 전력제어에 적용하는 경우 송신단에서 페이딩의 영향을 제거하여 신호를 송신하기 때문에 수신 단에서 여타의 요소기술들을 매우 단순하게 설계하거나 시스템의 복잡도를 획기적으로 개선시킬 수 있는 가능성을 제시하였다.