• 제목/요약/키워드: mmWave

검색결과 1,014건 처리시간 0.034초

집중 소자를 사용한 이중 대역 루프형 그라운드 안테나 설계 (Design of a Dual-Band Loop-Type Ground Antenna Using Lumped-Elements)

  • 이형진;류양;이재석;김형훈;김형동
    • 한국전자파학회논문지
    • /
    • 제23권5호
    • /
    • pp.551-558
    • /
    • 2012
  • 본 논문에서는 집중 소자로 임피던스 대역폭과 공진 주파수 컨트롤이 가능한 이중 대역 루프형 그라운드 안테나를 제안한다. 제안된 안테나의 이중 대역 특성은 기존의 루프형 그라운드 안테나의 형태에 추가적인 공진루프 급전 구조를 삽입하여 구현하였다. 적절한 캐패시터와 인덕터를 사용하여 2.45 GHz와 5.5 GHz 대역에서 VSWR<3에서 각각 85 MHz와 725 MHz의 임피던스 대역폭을 만족시켰으며, 시뮬레이션과 측정 결과를 통하여 그 타당성을 입증하였다. 제안된 안테나의 면적은 $10{\times}5mm^2$로 작은 크기를 갖고 있을 뿐만 아니라, 구현하고자 한 이중 대역에서 좋은 방사 패턴과 안테나 효율을 나타내었다.

Predictive model of fatigue crack detection in thick bridge steel structures with piezoelectric wafer active sensors

  • Gresil, M.;Yu, L.;Shen, Y.;Giurgiutiu, V.
    • Smart Structures and Systems
    • /
    • 제12권2호
    • /
    • pp.97-119
    • /
    • 2013
  • This paper presents numerical and experimental results on the use of guided waves for structural health monitoring (SHM) of crack growth during a fatigue test in a thick steel plate used for civil engineering application. Numerical simulation, analytical modeling, and experimental tests are used to prove that piezoelectric wafer active sensor (PWAS) can perform active SHM using guided wave pitch-catch method and passive SHM using acoustic emission (AE). AE simulation was performed with the multi-physic FEM (MP-FEM) approach. The MP-FEM approach permits that the output variables to be expressed directly in electric terms while the two-ways electromechanical conversion is done internally in the MP-FEM formulation. The AE event was simulated as a pulse of defined duration and amplitude. The electrical signal measured at a PWAS receiver was simulated. Experimental tests were performed with PWAS transducers acting as passive receivers of AE signals. An AE source was simulated using 0.5-mm pencil lead breaks. The PWAS transducers were able to pick up AE signal with good strength. Subsequently, PWAS transducers and traditional AE transducer were applied to a 12.7-mm CT specimen subjected to accelerated fatigue testing. Active sensing in pitch catch mode on the CT specimen was applied between the PWAS transducers pairs. Damage indexes were calculated and correlated with actual crack growth. The paper finishes with conclusions and suggestions for further work.

System identification of soil behavior from vertical seismic arrays

  • Glaser, Steven D.;Ni, Sheng-Huoo;Ko, Chi-Chih
    • Smart Structures and Systems
    • /
    • 제4권6호
    • /
    • pp.727-740
    • /
    • 2008
  • A down hole vertical seismic array is a sequence of instruments installed at various depths in the earth to record the ground motion at multiple points during an earthquake. Numerous studies demonstrate the unique utility of vertical seismic arrays for studying in situ site response and soil behavior. Examples are given of analyses made at two sites to show the value of data from vertical seismic arrays. The sites examined are the Lotung, Taiwan SMART1 array and a new site installed at Jingliao, Taiwan. Details of the installation of the Jingliao array are given. ARX models are theoretically the correct process models for vertical wave propagation in the layered earth, and are used to linearly map deeper sensor input signals to shallower sensor output signals. An example of Event 16 at the Lotung array is given. This same data, when examined in detail with a Bayesian inference model, can also be explained by nonlinear filters yielding commonly accepted soil degradation curves. Results from applying an ARMAX model to data from the Jingliao vertical seismic array are presented. Estimates of inter-transducer soil increment resonant frequency, shear modulus, and damping ratio are presented. The shear modulus varied from 50 to 150 MPa, and damping ratio between 8% and 15%. A new hardware monitoring system - TerraScope - is an affordable 4-D down-hole seismic monitoring system based on independent, microprocessor-controlled sensor Pods. The Pods are nominally 50 mm in diameter, and about 120 mm long. An internal 16-bit micro-controller oversees all aspects of instrumentation, eight programmable gain amplifiers, and local signal storage.

복부 선자세 단순촬영시 화질과 피폭선량에 관한 연구 (A Study on the Image Quality and Patient Dose in Erect Simple Abdomen Radiography)

  • 김정민;임태랑;석전유치;앵정달야
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제21권1호
    • /
    • pp.29-34
    • /
    • 1998
  • The purpose of simple abdomen erect projection is to see the fluid level which indicates gastrointestinal ileus or free air due to perforation. we do not have to insist on low kVp technique in simple abdomen erect position as long as we can detect the fluid level and free air shadow. Therefore, the author tried to decrease patient dose by high kVp technique and to improve the image quality due to motion artifact by reduction of exposure time. [Methods] Experiment 1. * screen/film SRO1000/HRH * exposure factor : $140\;kvp{\pm}5\;kv$ with added filters, 200 mA, 0.01 sec * phantom : Acryles : 15.0 cm(equivalent to 17 cm body thickness) 17.5 cm(equivalent to 21 cm body thickness) 20.0 cm (equivalent to 25 cm body thickness) With the exposure factor for same film density($D=0.8{\pm}0.1$) and with the materials above, we tried to find out entrance skin dose and gonad dose for both male and female. Experiment 2. Burger's phantom radiography were checked to see whether there was any change of image quality according to the kVp and the added filters. Experiment 3. Using rotating meter(self made), we examined the motion artifact and the exposure time limitation. [Results and conculution] 1. Using high voltage technique of 140 kVp with added filter, Skin dose, testicle dose and ovary dose decrease to 89.3%, 47% and 71.4% respectively compare to 70 kVp technique, 2. No great changes of Burger's phantom image has detected as from 70 kVp to 140 kVp and the air hole size of Burger's phantom over 0.028 cc(Diameter 3 mm, hight 4 mm) can be distinghished. 3. 0.01 sec(1 pulse) exposure time is possible in the single phase full wave rectification that why we can quitely reduce the unsharness caused by patient's movement.

  • PDF

고립파의 특성에 따른 경사면의 하상변동에 관한 실험적 연구 (Experimental study of bed transport on slope by characteristics of solitary wave)

  • 조재남;김동현;황규남;이승오
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2016년도 학술발표회
    • /
    • pp.31-31
    • /
    • 2016
  • 국내 해안선을 따라 발생되는 침식 및 퇴적현상으로 인하여 해안구조물의 안정성과 같은 안전 문제가 발생되고 있다. 이러한 자연현상을 대비하여 연안지역 특성에 맞는 침식 저감 대책 마련에 대한 연구가 되고 있다. 침식현상은 다양한 외력조건과 지리적 특성을 함께 고려해야 한다. 고립파로 인한 침식 발생 현상에 대한 국외 연구들이 다수 수행되어 왔으며, 국내에는 이와 관련된 연구가 상대적으로 부족하다. 고립파는 파고의 특성에 따라 파형이 결정되는 특징을 가지고 있어, 침식현상과 지진해일의 실험적 연구에 있어 입사파로 주로 활용되고 있다. 기존의 방법과 동일하게 sluice gate를 순간적으로 개방하여 고립파를 재현하는 방식으로 파랑을 재현하였다. 본 연구에서는 폭 0.80 m, 높이 0.75 m, 수로연장 12.00 m의 강화유리로 설계된 직사각형 단면 수로에서 실험을 수행하였다. 측면에 두 대의 카메라(Model No. : Sony, HDR-XR550)를 고정설치하여 경사면 하상변화를 촬영하였고, 영상분석을 통하여 하상변동을 측정하였다. 유사특성에 따른 하상변동을 연구하기 위하여 경사면에 포설된 유사로는 주문진 표준사($d_{50}=0.6268mm$, $c_u=1.68$)와 안트라사이트($d_{50}=1.547mm$, $c_u=1.387$)를 동일한 실험조건에서 함께 사용하였다. 경사면에서 고립파의 처오름, 처내림을 추적하여 그 경향을 분석하였다. 하상의 침식 및 퇴적구간 길이, 침식, 퇴적의 높이 및 깊이와 같은 형상분석을 통한 영향인자를 함께 무차원화 하여 실험결과를 제시하였다. 본 연구의 결과를 바탕으로 Sluice gate를 이용한 고립파 수리실험으로 경사면 하상의 침식 및 퇴적 현상에 관한 기초적인 실험자료로 활용될 것이다.

  • PDF

포고억제장치 설치에 따른 배관계 동특성 변화 (Change of Piping-System Dynamics with Installation of Pogo Suppression Device)

  • 이준경;이상용;이한주;오승협
    • 한국추진공학회지
    • /
    • 제9권2호
    • /
    • pp.32-39
    • /
    • 2005
  • 액체 연료 로켓의 연료 공급 라인을 모사 한 시스템에 대해, PSD가 시스템의 응답에 미치는 영향을 살펴보았다. 주관의 유량 변화에 대한 주관 압력 변화의 비(시스템 응답)를 PSD 내의 기체 체적$((0\~2)\times10^{-3}m^3)$과 PSD 배플의 직경(5, 50, 115 mm)을 변화시키며 살펴보았다. PSD 내에 기체가 있을 경우, 시스템의 고유진동 주파수가 작아짐을 확인하였다. 그리고 기체의 체적이 클수록 시스템 고유진동 주파수가 작아졌으나, 그 변화는 그리 크지 않았다. 또한 PSD 내 기체량이 많은 경우, 주관 내 압력 및 유량 변화의 진폭이 많이 감소함을 확인할 수 있었다. PSD 배플의 직경이 작아질수록 시스템 고유 진동 주파수가 작아졌으나 그 변화는 작았다. 또한 PSD 배플의 저항이 클 때, PSD 내 압력은 주관의 압력 크기보다 작고, 지연된 파형이 관찰되었다.

일주일간의 간헐적 좌식차단의 혈관기능 개선 효과 (Seven Days Breaking Up Prolonged Sitting Improves Systemic Endothelial Function in Sedentary Men)

  • 박수현;윤은선;제세영
    • 운동과학
    • /
    • 제26권1호
    • /
    • pp.61-68
    • /
    • 2017
  • PURPOSE: To examine the cumulative (7 days) effect of breaking up prolonged sitting on systemic endothelial function in sedentary men. METHODS: Thirty sedentary men ($33.93{\pm}5.72years$) participated in two randomized 7 days sitting trial (Sit group (control) vs. Breaks group). The protocol of Breaks group is as follows: 4-minute of moderate-intensity marching in place (walking) every 1 hour during business hour (total: 8 breaks/day). Assessment of brachial artery endothelial function using flow-mediated dilation (FMD) and arterial stiffness indices (augmentation index, arterial pressure and pulse wave velocity) were measured before and after 7 days treatment. RESULTS: Brachial artery FMD significantly increased after 7 days breaking up prolonged sitting treatment (Breaks groups, $9.65{\pm}2.61$ to $9.62{\pm}2.6%$) compared with 7 days prolonged sitting (Sit group, $8.37{\pm}3.41$ to $10.11{\pm}3.75%$) (interaction effect, p=.004). Arterial pressure (AP) significantly increased after treatment (Breaks group, $2.75{\pm}2.19$ to $2.38{\pm}1.63mmHg$, p=.002) in Sit group but there was no change (Sit group, $1.00{\pm}3.18$ to $2.50{\pm}9.23mmHg$) in Breaks groups (interaction effect, p=.008). CONCLUSIONS: These finding show that 7 days regular breaking up prolonged sitting improve in FMD, compared with prolonged sitting. Therefore, regular breaking up prolonged sitting may improve systemic endothelial function in sedentary men.

초음파 속도법을 활용한 강판의 두께 변화 탐지를 위한 기초연구 (A Basic Study on the Varying Thickness Detection of Steel Plate Using Ultrasonic Velocity Method)

  • 김우석;문성모;김철민;임석빈
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제24권6호
    • /
    • pp.146-152
    • /
    • 2020
  • 본 연구는 강교량의 폐합부재 등 시각적으로 탐지하기 어려운 부위의 강재에 대한 손상을 탐지하기 위한 방법을 개발하기 위한 목적의 기초연구이다. 여러 비파괴 방법들 중에서 초음파 속도법을 활용하여 두께가 다른 시편에 대해서 초음파 속도법을 실시하여, 평균 매질내 전파속도를 도출하였고, 이를 활용하여 강재 부재에 대한 회귀분석을 실시하였다. 동일한 재료일 경우 회귀분석의 결과를 활용하면 다른 부재의 두께를 도출할 수 있을 것으로 예상된다. 또한, 광범위한 범위를 스캐닝하기 위해 200 mm/s로 이동하는 연속스캐닝 기법을 검토하였고, 두께가 변화는 부재의 두께를 효과적으로 예측할 수 있었다.

지상파 DTV 및 UHD TV용 수평 슬릿이 추가된 소형 광대역 루프 안테나 설계 (Design of Compact Wideband Loop Antenna with Horizontal Slits for Terrestrial DTV and UHD TV Applications)

  • 여준호;이종익
    • 한국항행학회논문지
    • /
    • 제24권6호
    • /
    • pp.581-586
    • /
    • 2020
  • 본 논문에서는 수평 슬릿이 추가된 지상파 디지털 TV(DTV) 및 UHD TV용 광대역 루프 안테나의 설계 절차와 방법을 제안하였다. 제안된 루프 안테나는 정사각형 루프와 두 개의 원형 섹터로 구성되는 기존의 광대역 루프 안테나에 소형화하기 위해 두 개의 원형 섹터에 수평 슬릿을 추가하였다. 급전을 위해 아래쪽 원형 섹터의 중앙에 동일면 도파관(CPW; coplanar waveguide) 전송선로가 삽입되었다. CPW 급전선로는 DTV 및 UHD TV 응용을 위해 75 옴 포트 임피던스를 사용하여 설계되었으며, 임피던스 정합을 개선하기 위해 중심신호선의 끝이 점점 가늘어지게 설계되었다. 최종 설계된 안테나는 두께가 0.8 mm인 FR4 기판에 제작하였다. 특성 실험 결과, 전압 정재파비(VSWR; voltage standing wave) < 2인 대역이 444.3-820.1 MHz로 DTV 대역(470-698 MHz)과 UHD TV 대역(698-771 MHz)에서 동작하는 것을 확인하였다.

Effect of Free Surface Based on Submergence Depth of Underwater Vehicle

  • Youn, Taek-Geun;Kim, Min-Jae;Kim, Moon-Chan;Kang, Jin-Gu
    • 한국해양공학회지
    • /
    • 제36권2호
    • /
    • pp.83-90
    • /
    • 2022
  • This paper presents the minimum submergence depth of an underwater vehicle that can remove the effect of free surface on the resistance of the underwater vehicle. The total resistance of the underwater vehicle in fully submerged modes comprises only viscous pressure and friction resistances, and no wave resistance should be present, based on the free surface effect. In a model test performed in this study, the resistance is measured in the range of 2 to 10 kn (1.03-5.14 m/s) under depth conditions of 850 mm (2.6D) and 1250 mm (3.8D), respectively, and the residual resistance coefficients are compared. Subsequently, resistance analysis is performed via computational fluid dynamics (CFD) simulation to investigate the free surface effect based on various submergence depths. First, the numerical analysis results in the absence of free surface conditions and the model test results are compared to show the tendency of the resistance coefficients and the reliability of the CFD simulation results. Subsequently, numerical analysis results of submergence depth presented in a reference paper are compared with the model test results. These two sets of results confirm that the resistance increased due to the free surface effect as the high speed and depth approach the free surface. Therefore, to identify a fully submerged depth that is not affected by the free surface effect, case studies for various depths are conducted via numerical analysis, and a correlation for the fully submerged depth based on the Froude number of an underwater vehicle is derived.