• Toxicological Research
• /
• v.12 no.2
• /
• pp.231-236
• /
• 1996

The toxicity of the mixture of diazinon, toxaphene(TOX) and/or endrin was studied in ICR male mice(18-22 g) by oral intubation, in corn oil, daily for up to 14 days. On day 15, the exposure was discontinued and animals were monitored for an additional period of 7 days for the possible reversibility of the toxicity. The body weight gain decreased with the mixtures, as well as with the individual pesticides, during the 14-day period. TOX and TOX containing mixtures significantly increased the liver/body weight ratio. The serum glutamic pyruvic transaminase level increased at 23~374% in diazinon, TOX, and endrin or their mixture group. The cholinesterase(ChE) activity in the serum and brain was inhibited in the animals of the group of diazinon(5, 10 mg/kg) and diazinon(5 mg/kg) containing mixtures. TOX(40, 80 mg/kg) caused initial inhibitory effects on the serum ChE Day 1. but there is little effects on the brain ChE levels. endrin(5,10 mg/kg) results in significantly elevated levels of the serum ChE, with substantial decreases in the brain ChE activity. TOX and TOX containing mixtures decreased the pentobarbital(60 mg /kg, ip., in saline) induced sleep. The effects produced by this pesticides singly, as well as by their mixtures, appeared to be reversible in nature. The toxic effects exhibited by the mixtures of diazinon(5 mf/kg), TOX(40 mg/kg), and /or endrin(5 mg/kg) were found to be the resultant of the effect showed by their components individually.

• Geomechanics and Engineering
• /
• v.37 no.5
• /
• pp.443-452
• /
• 2024

The use of sand-tire chip mixtures in construction industry is a sustainable and environmentally friendly approach that addresses both waste tire disposal and soil improvement needs. However, the addition of tire chip particles to natural soils decreases maximum shear modulus (G_max), but increases compressibility, which can be potential drawbacks. This study examines the effect of overconsolidation stress history on the maximum shear modulus (G_max) of rigid-soft mixtures with varying size ratios (SR) and tire chip contents (TC) by measuring the wave velocity through a 1-D compression test during loading and unloading. The results demonstrate that the G_max of tested mixtures in the normally consolidated state increased with increasing SR and decreasing TC. However, the tested mixtures with a smaller SR exhibited a greater increase in G_max during unloading because of the active pore-filling behavior of the smaller rubber particles and the consequent increased connectivity between sand particles. The SR-dependent impact of the overconsolidation stress history on G_max was verified using the ratio between the swelling and compression indices. Most importantly, this study reveals that the excessive settlement and lower G_max of rigid-soft mixtures can be overcome by introducing an overconsolidated state in sand-tire chip mixtures with low TC.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.4
• /
• pp.526-532
• /
• 2006

The aim of this study was to evaluate the chemical composition, in vitro DM degradability, ME and OMD of alfalfa-maize silage mixtures in comparison to pure maize and alfalfa silages, and to test the existence of associative effects of ensiling alfalfa forage with whole-crop maize using the in vitro gas production technique. Ensiling alfalfa with whole-crop maize had a significant (p<0.001) effect on chemical composition, pH, in vitro DM degradability, OMD and estimated ME values of mixtures. DM content of the resultant silages significantly increased with increasing proportion of whole-crop maize in the mixtures, whereas the pH value, crude protein (CP), acid detergent fibre (ADF) and ash contents of mixtures decreased due to the dilution effect of whole-crop maize which was low in CP, ADF and ash. The pH values of all alfalfa-maize silage mixtures were at the desired level for quality silage. Gas production of alfalfa-maize silage mixtures at all incubation times except 12 h increased with increasing proportion of whole-crop maize. When alfalfa was mixed with whole-crop maize in the ratio 40:60, ME and OMD values were significantly (p<0.001) higher than other silages. Maximum gas production ($A_{gas}$) ranged from 65.7 to 78.1 with alfalfa silage showing the lowest maximum gas production. The results obtained in this study clearly showed that maximum gas production increased with increased percentage of whole-crop maize in the silage mixtures (r = 0.940, p<0.001). It was concluded that ensiling alfalfa with whole-crop maize improved the pH, OMD and ME values. However, trials with animals are required to see how these differences in silage mixtures affect animal performance.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.5 s.236
• /
• pp.643-652
• /
• 2005

Saturated nucleate pool boiling experiments for binary mixtures, which are consisted of refrigerant R11 and R113, were performed with constant wall temperature condition. Results for binary mixtures were also compared with pure fluids. A microscale heater array and Wheatstone bridge circuits were used to maintain the constant temperature of the heating surface and to obtain heat flow rate measurements with high temporal and spatial resolutions. Bubble growth images were captured using a high speed CCD camera synchronized with the heat flow rate measurements. The departure time for binary mixtures was longer than that for pure fluids, and binary mixtures had a higher onset of nucleate boiling (ONB) temperature than pure fluids. In the asymptotic growth region, the bubble growth rate was proportional to a value between $t^{\frac{1}{6}}$ and $t^{\frac{1}{4}}$. The bubble growth behavior was analyzed to permit comparisons with binary mixtures and pure fluids at the same scale using dimensionless parameters. There was no discernable difference in the bubble growth behavior between binary mixtures and pure fluids for a given ONB temperature. And the departure radius and time were well predicted within a ${\pm}30{\%}$ error. The minimum heat transfer coefficient of binary mixtures occurred near the maximum ${\mid}y-x{\mid}$ value, and the average required heat flux during bubble growth did not depend on the mass fraction of R11 as more volatile component in binary mixtures. Finally, the results showed that for binary mixtures, a higher ONB temperature had the greatest effect on reducing the heat transfer coefficient.

• Elastomers and Composites
• /
• v.33 no.5
• /
• pp.324-334
• /
• 1998

SBR, polyurethane, acryl and epoxy latex were seperately mixed with ethylene-vinylacetate emulsion(EVA) in the range of $0{\sim}50%$ (wt.% ). For the mixtures, the various physical properties were examined. The viscosity of mixtures was mainly influenced by compatability with EVA emulsion, was decreased within 20% (wt.% ) of latex content, and showed the similar values over 20% (wt.% ) of latex content. The workable time of cement mixtures was mainly depended on the reactivity with cement. The formation of film could be only within $30{\sim}40$ minutes from mixing cement. The tack-free time of mixtures was influenced by the sorts of resin and the quantity of cement. The slow order of tack-free time was epoxy mixtures>SBR mixtures>urethane mixtures>acryl mixtures. The pencil hardness of mixtures was $4B{\sim}2H$, represented higher value in cement mixtures than in emulsion state.

• International Journal of Highway Engineering
• /
• v.18 no.1
• /
• pp.33-41
• /
• 2016

PURPOSES : This study primarily focused on evaluating the performance characteristics of 4.75-mm nominal maximum aggregate size (NMAS) asphalt mixtures for their more effective implementation to a layered flexible pavement system. METHODS : The full-scale pavements in the FDOT's accelerated pavement testing (APT) program, including 4.75-mm mixtures at the top with different thicknesses and asphalt binder types, were considered for the faster and more realistic evaluation of the rutting performance. The results of superpave indirect tensile (IDT) tests and hot-mix asphalt fracture mechanics (HMA-FM) based model predictions were used for cracking performance assessments. RESULTS : The results indicated that the rutting performance of pavement structures with 4.75-mm mixtures may not be as good as to those with the typical 12.5-mm mixtures, and pavement rutting was primarily confined to the top layer of 4.75-mm mixtures. This was likely due to the relatively higher mixture instability and lower shear resistance compared to 12.5-mm mixtures. The energy ratio (ER) and HMA-FM based model performance prediction results showed a potential benefit of 4.75-mm mixtures in enhanced cracking resistance. CONCLUSIONS : In relation to their implementation, the best use of 4.75-mm mixtures seem to be as a surface course for low-traffic-volume applications. These mixtures can also be properly used as a preservation treatment that does not necessarily last as long as 12.5-mm NMAS structural mixes. It is recommended that adequate thicknesses and binder types be considered for the proper application of a 4.75-mm mixture in asphalt pavements to effectively resist both rutting and cracking.

• Journal of Ginseng Research
• /
• v.5 no.1
• /
• pp.8-23
• /
• 1981

Color is one of the most important quality factors of red ginseng (Hong-sam) which is processed from fresh ginseng (Panax ginseng C. A. Meyer). Therefore, a study of characteristics of browning mixtures of aqueous fresh ginseng extracts, factors which accelerate the browning of the aqueous extracts, and the antioxidant activity of the browning mixtures may contribute to the improvement of the color and other quality of red ginseng and other ginseng products such as ginseng extracts. In the present study, factors which affect the Maillard-type browning reaction of aqueous extracts of fresh ginseng roots were investigated firstly by adding various concentrations (0.001-0.5M) of arginine or glucose solutions, by varying the browning reaction temperatures and durations. Secondly, some characteristics such as brown color intensity, amounts of water-soluble and ether-soluble extracts, amounts of non-dialyzable materials, pH, viscosity, and reactivity with 2,2'- diphenyl -1 - picrylhydrazyl and antioxidant activity of the browning mixtures of the aqueous fresh ginseng extracts with small amounts of 0.1 M arginine, 0.1 M glucose, and distilled water at various browning temperatures and reaction time were studied. The results of the present study are as follows. 1. Color intensity (absorbance at 470 nm) of the browning mixtures was increased by adding various concentrations of arginine solution to the fresh ginseng extract, but the addition of the same amount of glucose solution did not increase the color intensity. 2 The amounts of water- or ether-soluble extracts, amounts of non-dialyzable materials were slightly greater in case of the browning mixtures of the fresh ginseng extract with 0.1M arginine solution than in case of the browning mixtures of the fresh ginseng extract with the same amount of 0.1 M glucose solution. In the process of the browning reaction, the pH of the browning mixtures of the fresh ginseng extract with 0.1 M arginine solution decreased slightly, while that of the browning mixtures with 0. 1 M glucose solution was almost constant. 3. The color intensity (absorbance at 470 nm) of the browning mixtures of the fresh ginseng extract with 0.1 M arginine or 0.1 M glucose solutions did not correlate well with the reducing power or the antioxidant power of the browning mixtures. The antioxidant activity of 90% ethanol extracts from the earlier stages of the browning mixtures of the fresh ginseng extract with the arginine solution was almost comparable to that of the 90% ethanol extracts from the later stages of the corresponding browning mixtures. The browning mixtures of only the fresh ginseng extract or of the fresh ginseng extract with the glucose solution showed considerable antioxidant activity, although both showed less brown color intensity than the fresh ginseng extract with he arginine solution.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.371-376
• /
• 2001

Radiative transfer by nongray gas mixtures with nonuniform concentration and temperature profiles were studied by using the statistical narrow-band model and ray-tracing method with the sufficiently accurate $T_{60}$ quadrature set. Transmittances through the nonhomogeneous gas mixtures were calculated by using the Curtis-Godson approximation. Three different cases with different temperature and concentration profiles were considered to obtain benchmark solutions for nongray gas mixtures with nonuniform concentration and temperature profiles. The solutions obtained from this study were verified and found to be very well matched with the previous solutions for uniform gas mixtures. The results presented in this paper can be used in developing various solution methods for radiative transfer by nongray gas mixtures.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.9
• /
• pp.2131-2137
• /
• 1993

This study, examines the performance and the heat pump cycle systematizing characteristics for non-azeotropic refrigerant systems. In order to conduct such an examination, the cycle characteristics of heat pumps for pure R-22, R-114, and their mixtures were experimentally investigated. The results show that cooling/heating capacities for the mixtures was more suited at the evaporating temperature of $5^{\circ}C$ than that of $0^{\circ}C$, $-5^{\circ}C$, and $-10^{\circ}C$. The C.O.P of the 50 wt% mixtures was considerably higher than for pure R-22, and the compression power of the 25 wt% was as much as 60% lower than that of pure R-22. Even small fractional mixture variations can lead to significant changes in the characteristics of the heat pump cycle. This experiment verified the importance of accurate weight fractions of refrigerant mixtures.

• Journal of Pharmaceutical Investigation
• /
• v.22 no.4
• /
• pp.307-315
• /
• 1992

Dissolution rate of practically insoluble mefenamic acid was improved by roll mixing with sodium lauryl sulfate (SLS) or polyvinylpyrrolidone (PVP). The dissolution rate of the drug roll mixtures with SLS was superior to that of roll mixtures with PVP. The maximal dissolution rate was found in the roll mixtures system with SLS content of 60%. The dissolution rate of mefenamic acid roll mixtures with SLS content of 60% reached to the maximum value after 10 min of roll mixing. The transport of roll mixtures with SLS across rat jejunum was studied by the perfusion method using everted rat jejunum in vitro. The absorption rate of roll mixtures was superior to that of mefanamic acid.