• Journal of the Korean Society of Combustion
• /
• v.19 no.4
• /
• pp.49-55
• /
• 2014

Design criterion for the size of micro Pt-catalytic combustor is investigated in terms of heat release rate. One-dimensional plug flow model is applied to determine the surface reaction constants using the experimental data at stoichiometric butane-air mixture. With these reaction constants, the mass fraction of butane and heat release rate predicted by the plug flow model are in good agreement with the experimental data at the combustor exit. The relationship between the size of micro catalytic combustor and mixture flowrate is introduced in the form of product of two terms-the effect of fuel conversion efficiency, and the effect of chemical reaction rate and mass transfer rate.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.6
• /
• pp.758-766
• /
• 2006

A two-stage bioreactor, which consists of a biotrickling filter module and a biofilter module in series, was investigated for the enhanced treatment of a VOC mixture, toluene and methyl ethyl ketone (MEK). Throughout the experiments, the overall inlet loading rate was maintained at approximately $43g/m^3/hr$, but the inlet ratios of the VOCs were modified. The experimental results showed that the different ratios of the VOC mixture resulted in changes of overall removal efficiencies, elimination capacities (ECs) and microbial accumulation on the surface of each packing material. The ratio of inlet toluene to MEK at 50 : 150 was found to be most effective in terms of the overall removal efficiency, because, at this condition, MEK (i.e., the hydrophilic compound) was mostly removed in the biotrickling filter module and the following biofilter module was used to remove toluene. It was also found that when the inlet loading rate of the VOC mixture was serially increased stepwise within short-term periods, the ECs for toluene dropped significantly but the ECs for MEK increased at the ratio of the VOC mixture. These results implied that substrate interaction and/or substrate preferable utilization might have an effect on the biological removal of each compound in the two-stage bioreactor; therefore, the bioreactor should be operated in the condition where the substrate interaction could be minimized in order to maximize overall performance of the two-stage bioreactor.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.9
• /
• pp.1307-1311
• /
• 2002

Twelve dietary combinations were prepared using 70 parts of fermented wheat straw (FWS) as the sole roughage supplemented with 30 parts of either the low protein concentrate mixture (Conc.-I), high protein concentrate mixture (conc.-II), maize grains (M), solvent extracted mustard cake (DMC), deoiled rice bran (DRB), uromol bran mixture (UBM), deep stacked poultry litter (DSPL), dried poultry droppings (DPD), M-DMC mixture (50:50), M-UBM mixture (50:50), M-DPD mixture (50:50) or M-UBM-DPD mixture (50:25:25) and evaluated by in-sacco technique. The above dietary combinations were also evaluated by changing the roughage to concentrate ratio to 60:40. The digestion kinetics for DM and CP revealed that FWS:DPD had the highest, whereas, the FWS:M-DMC had the lowest rapidly soluble fraction. The potentially degradable fraction was found to be maximum in FWS:M and minimum in FWS:DPD dietary combinations. The higher degradation rate of FWS:DRB and FWS:UBM combinations was responsible for their significantly (p<0.05) higher effective degradability as compared to other combinations. The highest undegradable fraction noted in FWS:M-UBM-DPD followed by FWS:DMC was responsible for high rumen fill values. The FWS:DRB, FWS:UBM and FWS:DPD combinations had higher potential for DM intake. The dietary combination with higher concentrate level (60:40) was responsible for higher potentially degradable fraction, which was degraded at a faster rate resulting in significantly higher effective degradability as compared to the corresponding dietary combination with low concentrate level (70:30). The low undegradable fraction in the high concentrate diet was responsible for low rumen fill values, which predicted of high potential for DM intake. Out of 24 dietary combinations, FWS with either of UBM, DRB, DMC, Maize, M-DMC or DPD in 70:30 ratio supplemented with minerals and vitamin A in comparison to conventional feeding practice (roughage and concentrate mixture) could be exploited as complete feed for different categories of ruminants.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.3
• /
• pp.35-41
• /
• 2001

In recent applications, map controlled thermostat has been adapted to optimize engine cooling system and vehicle cooling system. First of all, this strategy is focused on improving fuel consumption rate and reducing emissions, especially unburned hydrocarbon. The object can be obtained through controlling engine metal temperature by varying engine coolant temperature with engine load and speed. To achieve this goal, it is necessary to understand the characteristics of engine metal temperature and heat rejection rate to coolant. From the results of tested engines, it is obvious that fuel consumption rate has more dominant effect on engine metal temperatures than the corresponding engine power does. Also, Re-Nu relation which shows heat rejection rate to coolant in function of air-fuel mixture and engine specifications has been studied. Also, the empirical Re-Nu relation at full loaded engine was developed.

• International Journal of Precision Engineering and Manufacturing
• /
• v.1 no.1
• /
• pp.33-41
• /
• 2000

Fiber reinforced metal laminates(FRMLs) were new type of hybrid materials. FRMLs consist of high strength metals(Al 5052-H34) and laminated fiber with structural adhesive bond. The effect of resin mixture ratios on the fatigue crack propagation behavior and mechanical properties of aramid fiber reinforced aluminum composites was investigated. The epoxy, diglycidylether of bisphenol A(DGEBA), was cured with methylene dianiline(MDA) with or without an accelerator(K-54). Eight kinds of resin mixture ratio were used for the experiment ; five kinds of FRMLs(1)(mixture of epoxy and curing agent) and three kinds of FRMLs(2)mixture of epoxy, curing agent and accelerator). The characteristic of fatigue crack propagation behavior and mechanical properties FRMLs(2) shows more effecting than that of FRMLs(1).

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.525-528
• /
• 2005

This study determines the best composite grade to minimize the void of aggregate mixture based on the maximum density theory in an attempt to suggest a mix proportion method design for asphalt mixtures. Study results show that the grading curve with the maximum mass per unit capacity of each aggregate mixture satisfied the KS standards and the optimum AP content to meet the optimal asphalt mixture void rate of 4$\%$ was 5.7$\%$, less than the optimum AP content of 6.5$\%$ suggested in the Marshal mix proportion method design. At the same time, the asphalt mixture produced based upon the suggested mix proportion method had a flow value 17$\%$ lower than that of asphalt mixture produced according to the Marshal method, while its density was greater by 0.06$\～$0.09. This suggests that the introduced mix proportion method design helps to improve the shape flexibility and crack-resistance of asphalt concrete.

• Applied Biological Chemistry
• /
• v.18 no.2
• /
• pp.71-97
• /
• 1975

To improve the food qualities in Korea, two hundred and fourtynine kinds of food additives have been allowed in food processing, of which one hundred and nineteen kinds could be used under the limitted conditions. Hence, in practical uses in food processing, many kinds of them are mixed at random within the permitted amounts for their special purposes. For last several years, many kinds of the food additives were prohibited because they have been proved to be toxic even with the single dose. Until recently a few studies on the toxicity in the mixture of food additives were reported, however, they were shown to be no severe additional effect on the animal. This study was performed to see if any elevation of chronic or subacute toxicity of food additives occur especially when they are mixed with each other, using three kinds of food additives (DHA, AF-2, BHT) most widely used as food preservatives, antiseptics and antioxidants. One hundred and fifty young male rats were taken and divided into ten feeding groups, one first control group (food additives blank), three second control groups (DHA 0.1%, AF-2 0.1%, BHT 0.5%), three mixture groups of low level (mixture of each 60% of two second control level) and three mixture groups of high level (mixture of each 90% of two second control level). As the methods of biological and clinical tests, the change of body weight (growth rate), daily intake of diets, organ to body weight ratio, histopathological findings of organs, hematological observation, liver and kidney function tests were checked three times during the periods of 24 weeks. The following results were obtained. 1. The low level group of DHA, AF-2 mixture and DHA, BHT mixture revealed a little retardation in growth rate than the first control group, however, they were similar to the second controls, while all the mixture groups of high level showed a more remarkable retardation than the first and second controls. 2. Average daily intake of the diets was the same in each group, showing a similar decreasing tendency (70-100g/kg of body weight) in accordance with the growth rate. It was observed that there are no differences in the taste and appetite in each group of rats. 3. Abnormal enlargements of kidney and lung were not seen in all the mixture groups compared with the controls, while a slight hepatomegaly was observed in all mixture groups of low level as in the second controls. Significant differences (almost 1% level) were observed between the high level groups and the first control group. 4. Histopathological effects of the food additives on lung, kidney and liver tissues were found in all mixture group of high level. The less frequencies of the same effects were also seen in the low level groups. 5. The esterified cholesterol to total cholesterol ratio in the mixture groups of high level showed a little lower values, and the activities of serum glutamate oxaloacetate transaminase and alkaline phosphatase decreased almost with significance of 5% level compared with the first control group. The serum A/G ratio in the mixture groups also decreased. The results demonstrated that the liver function was decreased in the mixture groups compared with the controls. 6. In all groups throughout the test period, kidney functions (concentration of protein and creatinine excreated per hour in urine and renal filtration rate) were shown almost as normal as the first control. 7. Average values of hematocrit, erythrocytes and leucocytes in the mixture groups were in the normal ranges as in the controls, which denotes that the production of blood cells in bone marrow were also normal in all groups. With the above results, it is concluded that when the food additives (DHA, AF-2, BHT) were given together to the rats in several combinations even in less amount, they showed more toxic signs than the single doses.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.3
• /
• pp.8-18
• /
• 1998

This study was to make a effective seed mixture types with Korean native plants by researching te seed timing of suitable woody plants and competitive germination results of various plants for the purpose of cut-slotes revegetation. The results are summarized as follows. 1. In field polystand experiment, comparative among severalcomposition combination for early coverage shows good condition. 2. In combination for early-coverage, mixture of native woody plants only seeded in May and June shows over 90% coverage. It was not inferior to the other mixture types. So mixture of Albizzia Julibrissin, Cymbopogon doeringii, Alnus hirsuta and Indigfera pseudo-tinctoria is able to use to mixture type. 3.In case of combination for scenic beauty, Rhus chinensis shows low germination in the mixture for scenic beauty. But 90 days after seeded in May, it recorded maximum 44 cm height, seeded in June recorede 18 cm height. 4. Lespedeza crytobotrya shows good elongation in the combination for early coverage and scenic beauty, but that effects on elongation of other plants. So, it demands close investigation about suitable mixing rate of plants. 5. Alnus hirsuta, Pinus thunbergii, Betula platyphylla, Spiraea prunifolia var. simpliciflora have been rarely germinated. So, the mixture of these plants wasn't adequate to use for revegatation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.3
• /
• pp.377-381
• /
• 1993

Twenty male crossbred ($Sahiwal{\times}HF$) calves of about 6-9 months of age were divided into four groups of five animals each. All the animals were offered wheat straw ad lib. As the basal feed. However, animals in group I were fed concentrate mixture while the animals in groups II, III and IV had free access to urea molasses mineral block (UMMB) lick (I), (II) and (III) respectively as a partial substitute of concentrate mixture. The average concentrate offered (kg/day) to the animals was significantly (p<0.01) higher in group I ($2.69{\pm}0.18$) compared to groups II ($1.76{\pm}0.15$), III ($1.70{\pm}0.06$) and IV ($1.65{\pm}0.12$). The UMMB lick consumed was non-significantly different amongst groups I ($535.40{\pm}38.14$), II ($525.60{\pm}31.82$), III ($551.00{\pm}38.49$) and IV ($548.80{\pm}45.46$). Except ether extract, the digestibility coefficients of CP, ADF and NDF were non-significantly different in different groups. Similarly, N balance (g/day) and percent N retention of intake was not affected in different groups on supplementation of UMMB lick. Body composition of animals was similar in different groups supplemented with either concentrate mixture or concentrate mixture and UMMB licks. It may be concluded from these studies that UMMB lick can partially replace the concentrate mixture in the diet of growing calves without affecting the growth rate, nutrient utilization and body composition. The UMMB lick, thus, can form a part of the ration economically in the diet of growing ruminants especially in developing countries.

• Fashion & Textile Research Journal
• /
• v.18 no.6
• /
• pp.869-877
• /
• 2016

This study looks into the dyeing properties and functionality of cotton fabrics dyed in both the Spirodela polyrhiza extract and the extract resulting from the mixture of Salvia plebeia R. Br. and Spirodela polyrhiza. Since the UV-Vis Spectrum of the methanol extract of Spirodela polyrhiza shows absorption peaks at 256, 268nm, and 345nm, it can be inferred that the compound that Spirodela polyrhiza contains is a flavonoid. In addition, it can also be presumed that, by analyzing the infrared absorption spectrum of Spirodela polyrhiza, the plant contains flavonoid compounds, just like Salvia plebeia R. Br.. The UV protection factors of the cotton fabrics dyed in both the Spirodela polyrhiza extract and the extract from the mixture of Salvia plebeia R. Br. and Spirodela polyrhiza were 50+, presenting outstanding UV protection factors. The deodorization rate of the cotton dyed in the Spirodela polyrhiza extract was between 30 and 120 minutes, and the rate rose from 92% to 97% as time passed. The deodorization rate of the cotton dyed in the extract from the mixture of Salvia plebeia R. Br. and Spirodela polyrhiza increased from 88% to more than 91%. The result also revealed that overall the fastness of color, including color fastness to washing related to change in color, as well as the color fastness to light of the fabric dyed in the extract from the mixture of the two plants improved, compared to the cloth dyed only in Spirodela polyrhiza extract. Furthermore, the antibacterial activity was also strengthened.