생활계에서 발생되는 폐비닐은 토사, 금속, 유리 등의 이물질로 인해 고형연료(SRF, Solid Refuse Fuel)로 사용되었지만 최근 환경문제로 인해 고형연료의 사용량이 감소하고 있어 재활용이 필요한 실정이다. 본 연구에서는 폐비닐 재활용을 위해 우선 생활계 폐비닐로 생산된 복합 재생원료와 영농폐비닐로 생산된 PE 단일 재생원료에 대해 분석을 진행하였다. 원료 분석 결과, 폐비닐은 주로 폴리에틸렌으로 이루어져 있고 복합 재생원료는 약 2%의 회분이 잔존하고 있으며 PE 단일 재생원료의 경우는 회분이 없는 것을 확인하였다. 또한 두 재생원료의 배합비율에 따른 인장강도를 측정한 결과 열처리 온도 200 ℃, 압착 압력 30 MPa, 배합비율 3:7 (복합:PE 단일) 조건에서 인장강도가 최대 약 16 MPa임을 확인하였다. 굽힘강도는 열처리 온도 200 ℃, 압착 압력 30 MPa, 배합비율 3:7 (복합:PE 단일) 조건에서 최대 약 39 MPa임을 확인하였다. 따라서 재생원료들의 배합비율에 따른 강도 특성 변화를 확인함으로써 폐비닐의 재활용 가능성을 제시하고자 하였다.
슁글 중 함유된 아스팔트 성분의 재활용 기술의 개발은 슁글의 처리 비용의 감소와 경제적인 측면에서 매우 중요하다고 할 수 있다. 본 연구에서는 아스팔트 슁글을 도로 포장용 아스콘으로 재활용하기 위한 기초적인 연구를 수행하였다. 이를 위하여 순수한 아스팔트분과 재활용된 아스팔트 혼합물의 열적 특성, 점성 그리고 침입도를 측정하였다. 연구 결과 다음과 같은 몇 가지 결론을 얻을 수 있었다. DSC 분석에 의하면 처리 조건에 관계없이 분리된 슁글의 열적 특성은 유사한 결과를 보였다. 또한 슁글에서 분리된 아스팔트분의 멜팅은 $170^{\circ}C$ 부근에서 발생하였다. 분리된 아스팔트분을 중량비로 1~5% 까지 혼합한 후에 침입도를 측정한 결과 도로 포장용 아스팔트분의 기준에 적합한 것을 확인 할 수 있었다.
본 연구에서는 콘크리트 교면포장 재료로서 사용되는 라텍스의 단점인 경제성을 보완하고 자원재활용을 위해 괭생이모자반 기반의 자원순환형 폴리머 혼입에 따른 내구성능을 분석하였다. 본 연구 범위의 모든 배합조건에서 슬럼프 및 공기량은 품질기준은 만족하는 것으로 나타났으나, 분말 형태의 자원순환형 바이오 폴리머 적용시 슬럼프가 일부 저하되는 경향을 나타내었다. 압축강도 시험결과, 라텍스 혼입시 강도가 감소되었지만 바이오 폴리머 대체시 혼입율에 따라 6.3~24.4%의 강도 개선효과를 나타내었다. 내구성능 시험결과, 합성 폴리머 혼입시 가장 우수한 내구성능을 나타내었고, 바이오 폴리머 혼입시에는 혼입율이 증가할수록 내구성능이 우수한 경향을 나타내었지만 라텍스보다는 미소하게 낮은 것으로 확인되었다.
CaO원 산업부산물은 CaO, SO3 및 Al2O3 등으로 구성되어 있어 CaO 화합물의 원료로 사용되고 있다. 이러한 CaO원 산업부산물을 레미콘 회수수에 적용할 경우 슬러지수의 pH를 높여주어 콘크리트 분말 원료의 수화 반응을 촉진하여 콘크리트 조직을 치밀하게 하여 성능 향상이 가능할 것이다. 본 연구에서는 레미콘 회수수에 CaO원 산업부산물 중 하나인 탈황석고를 혼입하여 제조된 활성슬러지의 효과를 확인하기 위해 콘크리트의 특성을 분석하였다. 그 결과 콘크리트에 대한 시험 결과 작업성을 확보하면서 강도 및 건조수축에 대한 문제점이 없는 것을 확인할 수 있었으며, 활성슬러지를 이용한 콘크리트 적용에 대한 가능성을 확인할 수 있었다.
Recovered paper has been widely used as a main raw material of papermaking in Korea. Recycling of recovered paper helps to reduce production cost and preserve an environment. To recycle recovered paper efficiently, de-inking is a key process in recycling mills. De-inking process would be affected by various influencing factors such as the type of de-inking agent, mixed ratio of recovered paper, season, and process conditions. In this study, fatty acid and nonionic surfactant were used as the de-inking agent in froth-flotation process of mixed recovered paper. De-inking properties of mixed recovered paper were investigated according to the addition level of each chemical. Nonionic surfactant had a small effect on de-inking efficiency of mixed recovered paper due to decreased reject. As the additional level of fatty acid increases, fragmented ink particles increased and then optical properties of recycled paper decreased because fragmented ink particles adsorbed onto the fiber surface.
CaO 화합물의 원료로는 일반적으로 CaO, SO3, Al2O3 등으로 구성된 CaO 기반인 산업부산물이 있다. 이러한 CaO 계 산업부산물을 레미콘의 회수수에 적용할 경우 시멘트, 플라이애시, 슬래그미분말 등의 콘크리트 분말 원료의 수화 반응이 가속화되어 콘크리트 성능을 향상시킬 수 있다. 본 연구에서는 레미콘의 회수수에 C12A7을 함유한 열연 슬래그를 혼입하여 레미콘의 회수수에 적용할 수 있는 활성슬러지를 제조하였으며, 시멘트 페이스트 응결시간 및 모르타르 압축강도 성능 테스트를 통해 수화반응에 대한 영향을 확인하고자 하였다.
In order to induce the rapid alcohol fermentation through the increases of the cell density in a continuous alcohol fermentation of naked barley, the single-cultivation with S. cerevisiae IS-019(SCM, ordinary control), mixed-cultivation with Saccharomyces uvarum IS-026 having a flocculent ability and S. cerevisiae IS-019(MCM), and mash recirculation by single-cultivation of S. cerevisiae IS-019(MRM) modes were investigated. The cell mass in the mixed-cultivation mode was about 10% higher than that of ordinary control but the final alcohol yield was slightlyl decreased. When recycled the mash with the flow rate of 7 l/h from V$_{6}$ to V$_{5}$ fermentors under the ordinary control, the cell density was distributed at 140~170$\times $10$^{6}$ cell/ml depending upon the fermentorsorders, higher about 20% than that of the ordinary control. Under these conditions the alcohol productivity of the maximum and the overall was 12.16 g/l$\cdot $h with an alcohol of 7.6% at the V$_{5}$ fermentor and 1.19 g/l$\cdot $h with an alcohol of 8.94%, respectively. For higher cell mass it was more effective to apply the mash recirculation mode with the single-cultivation of S. cerevisiae IS-019 in a pilot scale multi-stage CSTR.
본연구의 선행연구에서는 주로 강모래를 포함한 각종 되메움재 후보군에 대하여 함수비, 건조단위중량, 입도분포 등의 차이에 따른 열저항 특성을 조사, 비교 분석하였다. 이 연구에서는 선행연구 결과를 토대로 하여 지중송전관로의 송전용량의 증대 및 열폭주(thermal runaway) 현상을 방지할 수 있는 새로운 되메움재의 개발에 주안점을 두었다. 연구를 위해 강모래, 재생모래, 쇄석, 석분과 같은 원재료에 플라이 애쉬(fly-ash), 슬래그(slag), 플록(floc)과 같은 입자가 작고 보습효과가 있는 재료를 혼합하여 혼합비와 함수상태에 따룬 열저항률의 변화를 측정, 분석하였다. 연구결과 단일재료만으로는 되메움재로의 사용이 어려울 것으로 판단되나, 쇄석의 입도분포 개선을 위해 평균입경이 작은 재생모래와 석분, 술래그 및 플록을 혼합한 결과, 최적함수비에서 $50^{\circ}C$-cm/Watt이하의 열저항률을 얻을 수 있고, 최적함수비 상태 후의 건조시에도 열저항률의 증가가 일어나지 않고 있어, 어느 정도 되메움재로서의 최적화에 근접한 것으로 판단된다.
The extraction properties of the biological waste originated from the Tobacco industry were evaluated. The biological waste have been recycled and transformed into a valuable material, so called a reconstituted tobacco sheet(Recon) by the papermaking process. In this process, The mechanical extraction process, which divides the mixed raw material slurry into the soluble stock and the insoluble stock, could affect not only the quality of final Recon product but also the productivity of whole Recon making process. This study investigated the effects of the extraction process on the slurry properties in detail. In order to quantify the amounts of the solubles which resided in the insoluble fibers, the washing treatment of the stock before and after squeezing process was applied. The amounts of the residual solubles showed little changes according to each stage of the extraction process. The fractionation of the slurry showed the difference in the amount of soluble in the stock depending on the size of the biological waste. After the extraction process, the bigger size fiber portion contained about 19%(by weight) in soluble after pressing but the smaller size fiber portion 9% in soluble. The fractionation ratio of the stocks also was changed by the screw press process, which could demonstrate the physical effects of the mechanical extraction.
본 연구는 폐플라스틱 중 저급의 복합재질 필름류 포장재를 콘크리트 원재료로 활용하기 위한 기초 연구로, LLDPE 및 HDPE의 2종의 플라스틱으로 제작된 잔골재를 사용하여 혼입률을 0, 25, 50, 75, 100%로 증가시키면서 플라스틱 잔골재의 종류 및 혼입률이 모르타르에 미치는 영향에 대하여 실험적으로 평가하였다. LLDPE 잔골재 및 HDPE 잔골재 혼입 모르타르는 유동성 및 재료분리저항성, 밀도 및 흡수율, 재령별 압축강도 및 휨강도에서 유사한 경향을 나타내었다. 플라스틱 잔골재를 혼입하지 않은 모르타르 대비 플라스틱 잔골재 혼입 모르타르의 유동성은 혼입률 50% 까지는 증가하다가 혼입률 75% 이상에서는 감소하였으며, 플라스틱 잔골재의 혼입에 따라 모르타르의 재료분리저항성은 급격하게 증가하였다. 한편, 플라스틱 잔골재의 낮은 밀도로 플라스틱 잔골재 혼입에 따라 모르타르의 밀도는 감소하였으며, 플라스틱 잔골재와 시멘트 사이의 낮은 부착력으로 인하여, 플라스틱 잔골재 혼입에 따라 재령별 압축강도는 플라스틱 잔골재 혼입률에 비례하여 감소하였으나. 재령별 휨강도는 플라스틱 잔골재 혼입률 50% 이상에서 일정 수준을 유지하며 감소하는 것으로 나타났다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.