• 동력기계공학회지
• /
• 제18권1호
• /
• pp.69-75
• /
• 2014

The pressure and temperature characteristics of mixed refrigerant gases in bulb for thermostatic expansion valve were studied using R22 refrigerant and $N_2$ gases. The characteristics of mixed refrigerant gases were investigated according to pressure variation and the variation of composition ratio of R22 refrigerant and $N_2$ gases in the temperature range of -$15^{\circ}C$~$15^{\circ}C$. The Maximum operating pressure(MOP) of mixed refrigerant gases were showed a tendency to decrease with decreasing the mixing ratio of $N_2$ gas. The characteristics in the case of the mixing ratio of 90:1 for R22 refrigerant and $N_2$ gases were the same result as Reference refrigerant. In addition, the characteristics of the mixed refrigerant gases in the mixing ratio of 90:1 for R22 refrigerant and $N_2$ gases were showed almost linear in the measurement range of pressure-temperature, and the physical properties also were showed similar results with Reference refrigerant. It was able to confirm that a MOP on the thermostatic expansion valve for sensing bulb can be maintained by adjusting the mixing ratio of R22 refrigerant and $N_2$ gases.

• 플랜트 저널
• /
• 제6권2호
• /
• pp.70-77
• /
• 2010

This study investigated the characteristics of co-combustion of mixed anthracite (domestic and Vietnam) and bituminous coal (Sonoma, Australia) at circulating fluidized bed boiler in Donghae thermal power plant when mixing ratio of bituminous coal is variable. Co-combustion of bituminous coal contributes to improvement in general combustion characteristics such as moderately retaining temperature of furnace and recycle loop, reducing unburned carbon powder, and reducing discharge concentration of NOx and limestone supply owing to improvement in anthracite combustibility as the mixing ratio was increased. However, bed materials were needed to be added externally when the mixing ratio exceeded 40% because of reduction in generating bed materials based on reduction in ash production. When co-combustion was conducted in the section of 40 to 60% in the mixing ratio while the supplied particles of bituminous coal was increased from 6 mm to 10 mm, continuous operation was shown to be possible with upper differential pressure of 100 mmH2O (0.98 kPa) and more without addition of bed materials for the co-combustion of mixed anthracite and bituminous coal (to 50% or less of the ratio) and that of domestic coal and bituminous coal (to 60% of the ratio).

• Journal of the Korean Wood Science and Technology
• /
• 제27권4호
• /
• pp.57-64
• /
• 1999

This research was carried out to investigate the effects of density, resin and particle types on the physical and mechanical properties of the composites made from various wood particles mixed with coating paper. The experiment was designed to apply with three particles (flake, chip, and fiber) and three resin types (urea, phenol and PMDI resin). The mixed ratio of coating paper to wood particle was fixed on 50 to 50% in each board making. And also it was designed to apply for four density levels (0.6, 0.7, 0.8 and 0.9 g/$cm^3$) and four mixed formulations of coating paper to wood particle (10:90, 20:80, 30:70, and 40:60 %) to analyze clearly the effects of PMDI resin. Coating paper-wood particle composites have acceptable bending strength (MOR, MOE) though the mixed ratio of coating paper was increased, but have low internal bond strength and poor dimensional stability (WA, TS, LE). Composites with high density had higher mechanical properties but showed lower physical properties than composites with low density. In conclusion, at least up to 20% mixed ratios, coating paper-wood particle composites have acceptable physical and mechanical properties, and PMDI resin has possibility for coating paper-wood particle composite manufacture.

• 한국응용과학기술학회지
• /
• 제27권2호
• /
• pp.123-128
• /
• 2010

The continuous transesterification of mixed fat was done on the plug flow reactor packed with the static mixers. The transesterification using 0.5 wt% KOH, 0.8 wt% TMAH and mixed catalyst[40 v/v% KOH(0.5 wt%)+60 v/v% TMAH(0.8 wt%)] was conducted with the changes of molar ratios, weight percentage of beef, flow rates and number of static mixer's elements at $65^{\circ}C$. The overall conversion of mixed fat at 1:8 molar ratio, 50 wt% of beef and 24 of static mixer's elements increased until 0.7mL/min of flow rate. The overall conversion of mixed fat showed 96% at those conditions. So, the optimum operating conditions on tublar reactor were 1:8 molar ratio, 50 wt% of beef, 0.7 mL/min of flow rate and 24 of static mixer' s elements.

• 한국산학기술학회논문지
• /
• 제13권6호
• /
• pp.2779-2788
• /
• 2012

현재 주택시장은 주택증가율 상회와 미분양증가, 장기침체로 어려우나 주상복합은 복합화를 위주로 주거시설과 다양한 수요 시설을 조합할 수 있으며 초고층화하여 넓은 오픈스페이스와 우수한 조망을 확보하는 장점을 가진다. 그러나 스카이라인 형성 저해, 건축물의 높이에 의한 문제점이 야기된다. 이에 본 연구는 초고층 주상복합 건축물 입지유형에 따른 높이기준 및 세장비를 제안하는데 목적이 있다. 연구의 방법은 먼저 문헌조사를 통한 용어정리, 선행연구조사를 하고 사례조사로 서울시내의 16개의 사례를 중심으로 도시 계획적 차원과 건축물 단위의 높이와 관련한 사항을 조사하였다. 이를 기준으로 입지유형별 높이기준과 세장비를 제안하여 다음과 같은 결론을 가진다. 첫째, 도시계획적 차원에서 입지유형별 주상복합의 높이는 부도심을 중심으로 시작하여 높아지며, 150m이하에서 200m이상으로 제안이 가능하다. 둘째, 세장비는 초고층건축물과 달리 주상복합의 저층부의 면적이 크므로 1:3 이상으로 계획하여 시각통로를 두어 개방성 및 군(群)의 형성에 통일성 있게 계획한다. 셋째, 초고층 주상복합 건축물과 관련한 높이에 있어 특별건축구역제도 수정 및 초고층 관련 특별법을 제정한다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 제26회 KOSCO SYMPOSIUM 논문집
• /
• pp.103-108
• /
• 2003

The control of flame shapes in a laminar pre-mixed flame has been experimentally investigated for propane/air pre-mixed laminar flames. Flames of different size and shapes are observed with heated wires or by controlling the equivalence ratio and flow rate of a mixture. The characteristics of the partitioning of a flame or the merge of flames are analyzed and explained by considering the balance between laminar flame speed and upstream mixture velocity. A combustor might be sized down while maintaining its heat production rate the same by partitioning a flame established in it. When the equivalence ratio of mixture is decreased, individual flames are merged together and the upstream mixture velocity can be practically decreased on a nozzle having opening ratio less than unity. As a result, the flame shape is to he adjusted until the newly established balanced condition is satisfied, and then. the stable combustion can be achieved again.

• 자원리싸이클링
• /
• 제13권3호
• /
• pp.43-49
• /
• 2004

플라스틱 재료는 재생이 가능한 열가소성 플라스틱과 재생이 거의 불가능한 열경화성 플라스틱으로 분류 할 수 있고, 본 연구에서는 재생이 가능한 열가소성 플라스틱 중 산업 및 생활 전반에 널리 사용되고 있는 PP. PA6, PC 및 PBT 재료의 재생 방안에 대한 기초 연구로서 재생 재료의 혼합비가 증가함에 따라 치수 정밀도에 미치는 영향을 고찰하였다.

• 경영과학
• /
• 제27권2호
• /
• pp.55-66
• /
• 2010

In Korea, deap-sea fishing industry plays an important role in a food industry. However, it is in a difficult situation because of the more competitive business environment. Therefore, there is a need to restructure the deap-sea fishing industry by scraping superannuated ships. This paper is designed to present scrap programs for deap-sea fishing industry of Korea. We performed ratio analysis to evaluate financial performance of fishing companies and then applied a mixed integer programming (MIP) model to identify optimal schedule for scraping. The results of the financial ratio analysis indicates that it is legible to provide governmental aid to Atlantic trawl, Northern Pacific trawl, and Indian ocean trawl with minimum required rate of return (MRR) of 3%, and the Atlantic strip fishing industry is qualified to receive the governmental aid with MRR value of 5%. Furthermore, by applying the MIP model to develop scrap planning, we demonstrate how our model can be used to restructure the deap-sea fishing industry of Korea.

• 한국농공학회논문집
• /
• 제47권3호
• /
• pp.49-56
• /
• 2005

This study was conducted by the tests of materials engineering and soil mechanics to see the strength characteristics of the ‘Cement-Mixed Soil'. To sum up my experiments, I would like to present the results which are the theoretical base and fundamental data to establish the standard design including the design of mixing proportions of the soil as a construction material. In conclusion, in this study the optimum cement mixing ratio is $9\%$ and in this ratio the optimum moisture content of compaction work is $19.3\%$ from the analysis of the strength characteristics, as well as in consideration of the economic profits and nature familiar facts.

• 동력기계공학회지
• /
• 제13권5호
• /
• pp.11-17
• /
• 2009

A numerical study of unsteady mixed convection in a cavity with high viscous fluid is presented. Finite volume method was employed for the discretization and PISO algorithm was used for calculating pressure term. The parameters governing the problem are the Rayleigh number ($10^3\;{\leq}\;Ra\;{\leq}\;10^5$), the Reynolds number (0 < Re $\leq$ 1), and the aspect ratio (0.5 $\leq$ AR $\leq$ 2). The fluid used is silicon oil, a high prandtl number fluid, Pr = 909.1. The results show velocity vectors and temperature distributions. It is found that the periodic flows in a cavity are observed at very low Reynolds numbers, and the period of periodic flow decreases with increasing Reynolds and Rayleigh numbers, and increases with increasing aspect ratio. Also, the Reynolds number range of periodic flow increases with increasing Rayleigh numbers and aspect ratio.