• 동력기계공학회지
• /
• 제20권6호
• /
• pp.51-57
• /
• 2016

Experiment is carried out to investigate the mixed convective flow in three-dimensional horizontal rectangular channels filled with high viscous fluid. The particle image velocimetry(PIV) with thermo-sensitive liquid crystal tracers is used for visualizing and analysis. Quantitative data of temperature and velocity are obtained by applying the color-image processing to a visualized image, and neural network is applied to the color-to-temperature calibration. In this study, the fluid used is silicon oil(Pr=909), the aspect ratio(channel width to heigh) is 4 and Reynolds number is $2{\times}10^{-2}$. From the present study, we can visualize the quantitative temperature and velocity of mixed convective flow in three-dimensional horizontal rectangular channels simultaneously.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권2호
• /
• pp.277-284
• /
• 2004

This paper describes the influence of through-flow on the mixed convection in a parallel plates with the upper part is cooled and the lower part heated. When forced convection is imposed on natural convection, it is found that the flow pattern of mixed convection in the parallel plates can be classified into three patterns which were affected by Reynolds number. In such a mixed convection, the flow pattern plays an important role in the heat transfer process. In this study, thermo-sensitive liquid crystal suspension method is employed, then the visualization image acquired through the above method is processed by the color image processing technique and the two-dimensional velocity vector and temperature configuration are measured simultaneously.

• Bulletin of the Korean Chemical Society
• /
• 제23권4호
• /
• pp.613-616
• /
• 2002

• 한국결정성장학회지
• /
• 제22권6호
• /
• pp.261-264
• /
• 2012

본 연구에서는 HVPE법으로 사파이어 기판(0001) 위에 성장시킨 GaN epilayer의 etching에 따른 표면변화 특성을 조사하였다. 주사전자 현미경(SEM) 관찰 결과, 3가지 형태를 갖는 육각형 모양의 etch pit(edge, screw, mixed) 들이 GaN epilayer의 두께 변화에 따라서 형성되었다. 이러한 관통전위들은(TDs) epilayer의 두께가 얇고, etch pit density가 높을수록 screw and mixed type TDs이 많이 관찰되었고, 두께가 증가할수록 etch pit density가 낮아지면서 edge and mixed type TDs들이 주로 존재하는 것을 관찰 할 수 있었다.

• 한국산학기술학회논문지
• /
• 제18권7호
• /
• pp.714-719
• /
• 2017

입자의 크기와 형상을 제어할 수 있는 무기물질의 제한된 제조방법은 나노입자와, 의료, 전자부품, 반도체, 의약품, 화장품 등과 같은 다양한 산업영역에서 신물질을 개발하는데 중요한 요소이다. 탄산칼슘은 수많은 활용성 때문에 산업에서 가장 많이 주목받고 있는 물질중 하나이다. 용액결정화는 용액으로부터 녹아 있는 용질을 순수한 고체 형태로 추출하는 분리 공정으로, 화학공업과 제약공업 등에 널리 적용되어, 사용되고 있는 분리공정 중에 하나이다. 입자의 평균입경과 입도분포, 형상은 연속식 결정화기에서 중요한 요소이다. 본 연구에서는 연속식 결정화기에서 염화칼슘 공정으로 탄산칼슘 입자를 제조할 때, 정상상태에서 탄산칼슘 입자의 입도분포와 입경변화에 대하여 연구하였다. 입자의 평균입경과 입도분포는 입도분석기를 이용하여 측정하였으며, 입자의 형상과 크기는 전자현미경(SEM)을 이용하여 변화를 관찰하였다. 정상상태에서, 주입되는 시료의 농도와 혼합속도가 증가 할수록 입자의 평균입경은 증가하고, 제조되는 입자는 aragonite 보다는 calcite 입자가 주로 생성된다.

• 한국결정성장학회지
• /
• 제8권2호
• /
• pp.292-298
• /
• 1998

출발원료로 ferric nitrate, ethylene glycol, acethyl acetone 혼합용액을 사용하여 dip-coating된 ${\alpha}-Fe_2O_3$ 막을 제조하였다. coating을 위한 혼합용액의 시간 경과에 따른 용액내의 가교(polymerization) 효과를 관찰하기 위해서 적외선 분광기(FT-IR)를 사용하였고, 막 형성시 유기물 분해 및 결정화 시작온도를 확인하기 위하여 FT-IR, XRD, DSC 등을 이용하여 분석을 행하였다. 또한 AFM과 SEM을 통하여 각 조건에서 제조된 막의 표면상태 및 두께 변화에 대하여 관찰되었다.

• Applied Science and Convergence Technology
• /
• 제27권2호
• /
• pp.42-45
• /
• 2018

Photovoltaic and optoelectronic devices based on hybrid metal halide perovskites ($MAPbX_3$; $MA=CH_3NH_3{^+}$, $X=Cl^-$, $Br^-$, or $I^-$) are rapidly improving in power conversion efficiency. Also, during recent years, perovskite single crystals have emerged as promising materials for high-efficiency photovoltaic and optoelectronic devices because of their low defect density. Here we show that the light soaking effect of mixed halide perovskite ($MAPbBr_{3-x}I_x$) single crystals can be explained using photoluminescence, time-resolved photoluminescence, and Raman scattering measurements. Unlike Br-based single crystal, Br/I mixed single crystal show a strong light soaking effect under laser irradiation condition that was related to the existence of multiple phases.

• Bulletin of the Korean Chemical Society
• /
• 제31권5호
• /
• pp.1262-1266
• /
• 2010

In this study, we investigated the use of liquid crystals to selectively detect the activity of enzymes at interfaces decorated with oligopeptide-based membranes. We prepared a mixed monolayer of tetra(ethylene glycol)-terminated lipids and carboxylic acid-terminated lipids at the aqueous-liquid crystal (LC) interface. The 17 amino-acid oligopeptide SNFKTIYDEANQFATYK was then immobilized onto this mixed monolayer through N-hydroxysuccinimide-activation of the carboxylic acid groups. We examined the orientational behavior of nematic 4-cyano-4'-pentylbiphenyl (5CB) after conjugation of the 17 amino-acid oligopeptide with the mixed monolayer assembled at the interface. Immobilization of the oligopeptide caused orientational transitions in 5CB, with a change from homeotropic (perpendicular) to tilted alignment, which was primarily due to the reorganization of the monolayer. The orientation of the 5CB molecules returned to its homeotropic state after contacting the interface containing ${\alpha}$-chymotrypsin, which can cleave the immobilized oligopeptide. Control experiments confirmed that the enzymatic activity of ${\alpha}$-chymotrypsin triggered the ordering transitions in the LC. These results suggest that the LC can provide a facile method for selective detection of enzymatic activity.

• The Korean Journal of Ceramics
• /
• 제2권4호
• /
• pp.251-256
• /
• 1996

Effect of mixed grinding with a planetary ball mill of starting materials before heat treatment on the crystal structure and superconduction properties in the YBaCu composite oxide was studied. The size reduction of powders too place in the early stage of grinding, followed by aggregation of the resultant fine particles. The uniformity of the composition in the mixture was improved with grinding, which later decreased in the crystal grain size and well distribution of twin phase in the sintered bodies. The critical current density of the sintered bodies obtained from the mixture ground for 60 minutes showed the maximum value about 150 A/$\textrm{cm}^2$, while critical temperatures were around 90K and were independent of the grinding time.

• 한국전기전자재료학회논문지
• /
• 제19권12호
• /
• pp.1160-1166
• /
• 2006

Maxwell-displacement-current (MDC) measuring technique has been applied for the investigation of monolayers of poly(vinyl alcohol)s bearing azobenzene side-chains (6Az5PVA) mixed with p-pentyl-p'-cyano-biphenyls (5CBs) on a water surface. For mixed monolayers containing trans-form 6Az5PVA and LCs, displacement current due to photo isomerization was not generated with alternative photo-irradiation with UV and svisible light. In contrast, for mixed monolaters containing cis-form 6Az5PVA and LCs, displacement current was generated. Finally, it was found that the alignment layers deposited in cis-form could photoregualte the orientation of LCs.