• Korean Journal of Organic Agriculture
• /
• v.27 no.4
• /
• pp.453-461
• /
• 2019

The purpose of this study was to evaluate the mixed treatment of compost tea and amino acid liquid fertilizer as a substitute of oil cake for the organic cultivation of maize in Goesan, Chungbuk province. As a result, nitrogen, phosphoric acid, potassium, calcium and magnesium contents of each organic fertilizer were in the order of oil cake > amino acid fertilizer > compost tea. Each of these organic fertilizers had little influence on the change of soil chemical. Individual treatment of amino acid fertilizer and oil cake for weight of an ear as well as all individual treatments for the fresh weight of 100 kernels showed significant increase, compared to the untreated control. For the corn yield of merchantable quality, each treatment of compost tea, amino acid liquid fertilizer and oil cake increased higher 3.9, 5.4 and 5.9% than untreated control, respectively. On the other hand, as a result of mixed treatment of amino acid fertilizer and compost tea, the change of soil chemical property was insignificant. The mixed treatment, Nonetheless, showed significant increase for stem height to 1st ear, grain setting length in an ear, weight of an ear, and fresh weight of 100 kernels, compared to the oil cake as a control. After all, the corn yield of merchantable quality produced by the mixed treatment was 3.9% higher than the control. Therefore, our study would be considered that the mixed treatment of amino acid and compost tea is one of organic materials that can replace oil-cake in maize.

• Journal of Bio-Environment Control
• /
• v.12 no.3
• /
• pp.166-172
• /
• 2003

Rockwool slabs used for hydroponic cultures are expected to have potential to be reused after breakdown as a growing medium component for hydroponic culture of vegetables and cut flowers, pot plants, or plug plants. This study was conducted to test the feasibility of using particles of used rockwool slabs (PURS) mixed with woodchips for growing plug seedlings of ‘Nokkufang’ pepper. In the first experiment growth of pepper seedlings was tested in media of steam sterilized PURS mixed with chestnut woodchips (CW), which was weatherized for six months and screened through 2.8 mm or 5.6 mm sieves, at 100:0, 75:25, 50:50, 28:75 or 0:100 (%, v/v). In the second experiment growth of pepper seedlings was tested in 20 different media containing steam sterilized PURS mixed with 4 mm chestnut woodchips (CW), 4 mm pinc woodchips (PW), coir, peatmoss, or perlite. In the first experiment, there were no significant growth differences as affectcd by particle size of CW, while the overall best growth was achieved il1 the control and l00% PURS. In the second experiment, seedling growth was enhanced as compared to the control in 100% PURS or PURS mixed with peatmoss, coir, or perlite. In contrast, growth was suppressed as the proportion of peatmoss or coir mixed with PURS decreased and the proportion of CW increased. Growth was better in the PURS + peatmoss than in the 100% PURS or PURS + coir, and when woodchips were mixed with coir than peatmoss.

• Journal of the Korean Institute of Gas
• /
• v.17 no.4
• /
• pp.51-57
• /
• 2013

The process of liquefied natural gas is less then $-160^{\circ}C$ to natural gas by cooling at atmospheric pressure. When control strategy was made, one of the most significant is analysis of process. It is important to understand the control variable change according to manipulated variable change. In this study, we experiment natural gas liquefied process using C3MR(Propane Pre-cooled Mixed Refrigerant) process by BSU(Bench Scale Unit). We analyzed the change of refrigerant temperature and natural gas temperature according to the change of refrigerant flow rate so as to search an influence flow rate according to adjust each manipulated variables. One of the manipulated variable affected a number of control variables, but were able to confirm a control variable with a large response.

• Journal of Chest Surgery
• /
• v.18 no.4
• /
• pp.732-739
• /
• 1985

This study was experimentally undertaken to evaluate the effect of the coronary vasodilator-mixed cardioplegic solution on myocardial protection during prolonged aortic cross-clamping. The dogs were divided into two groups: control group A[received hypothermic cardioplegic solution without any additive coronary vasodilator], and comparing group 8[received hypothermic cardioplegic solution, mixed with various coronary vasodilators and Inderal]. Group A further was divided into two subgroups: subgroup A-1[ischemic time, 90 minutes], and subgroup A-2 [ischemic time, 240 minutes]. Group B further was divided into five subgroups: subgroup B-1 [received papaverine mixed hypothermic cardioplegic solution], subgroup B-2[received nitroglycerin mixed hypothermic cardioplegic solution], subgroup B-3 [received nitroprusside mixed hypothermic cardioplegic solution, subgroup B-4[received hydralazine mixed hypothermic cardioplegic solution], and subgroup B-5 [received inderal mixed hypothermic cardioplegic solution]. The specimens from all of the subgroups were studied by electron microscopic examination. The specimens of subgroups [B-l, B-2 8-3, and B-4], received coronary vasodilators mixed hypothermic cardioplegic solutions, were also compared by methylene blue induced staining of the myocardium and coronary vessels. The results obtained were as followings: l. On electron microscopic examination, all of the specimens, including subgroup A-2, showed no irreversible change of the myocardium. But the best result was obtained from the subgroup B-l, treated by papaverine mixed hypothermic cardioplegic solution. The subgroup B-2, treated by nitroglycerin, was next. And the subgroup B-5, treated by Inderal, was agreeable, comparing the electron microscopic finding with control group in the effect of myocardial protection. 2. The distribution in the myocardium of cardioplegic solution was demonstrated with the aid of methylene blue staining in the subgroups of B-l, B-2, B-3, and B-4, and they were the groups treated by papaverine, nitroglycerin, nitroprusside, and hydralazine in their grouping order. The best result was obtained from the subgroup B-1 [papaverine]. The subgroup B-2 [nitroglycerin] was next. The subgroup B-3 [nitroprusside] was moderate in finding of the colorization. The subgroup B-4 [hydralazine] was the poorest in the distribution of the cardioplegic solution in the myocardium. From these results, it appeared that myocardial protection during ischemic arrest for open heart surgery could be enhanced considerably when coronary dilatation was assured.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.3
• /
• pp.193-198
• /
• 2002

In this paper, we Propose a PD+I fuzzy controller using an error-accumulating applying factor. In fuzzy control, analytical study was done formerly, in which fuzzy control can be classified by PD type and PI type, and also the study for getting merits of both types was done, too. But the mixed type has a complex structure and many parameters. The proposed fuzzy controller is 2-input 2-out-put and PD type fuzzy control is used as a basic structure. And the proposed controller annihilates a steady-state error and improves transient responses because of using the error-accumulating applying factor which is determined in the real time along the current state of controlled process. Futhermore it is easy to tune the system because of decreasing the number of scaling factors and the I type controller with resetting resolves the integral wind-up problem. Finally we apply the proposed scheme to various plants and show the performance betterment.

• Journal of the Korean Society of Food Culture
• /
• v.29 no.4
• /
• pp.355-363
• /
• 2014

The purpose of this study was to investigate the rheological characteristics of medium wheat flour mixed with bamboo leaf and lotus leaf powders. Rheological properties of the mixed flours were tested based on falling number, color, RVA, farinogram, and rheofermentometer analyses. Falling numbers increased with addition of bamboo leaf and lotus leaf powders. The L values of all mixed flours were less than that of control. The 1% mixed flour sample containing bamboo leaf and lotus leaf powders was not significantly different from 3% mixed flour. The a values of the mixed flour decreased as bamboo and lotus powders increased, whereas b values increased. Addition of bamboo leaf and lotus leaf powders to flour reduced peak viscosity, holding strength, and final viscosity. The set back values of mixed wheat flour containing bamboo leaf powder were lower than those of mixed wheat flour containing lotus leaf powder, suggesting that bamboo leaf powder suppressed retrogradation of flour compared to lotus leaf powder. In the farinogram, the water absorption and consistency of the flours containing bamboo and lotus leaf powders increased, whereas development time and stability decreased. The fermentation time of dough with lotus leaf powder was less than that of dough with bamboo leaf powder.

• Journal of Life Science
• /
• v.11 no.1
• /
• pp.76-82
• /
• 2001

Fifteen species of microorganisms were isolate form the intestines of fishes, fish feed, and ferment. Eleven microorganisms except HY4, HY8, HY12, and HY13 were Gram-positive, and HY1, HY2, HY3, HY5, HY6, and HY7 produced lactic acid. The species of HY1, HY2, HY3, HY4, HY5, HY6, HY13, and HY14 showed some growth in the medium containing 1% of NaCl. Except HY6, HY7, HY8, HY12 and HY5, 10 isolates had proteolytic activity, whereas only HY13 and HY14 had lipase activity. From all the results four isolates (HY3, HY4, HY13 and HY14) were chosen for the degradation of fish wastes. There was no mutual inhibition among the microorganisms, and the optimum temperature and pH for the growth of the mixed culture were found to be 3 2$\^{C}$ and 7, respectively. Under the optimum growth conditions the maximum optical density and the maximum specific growth rate were estimated to be 2.35 and {TEX}$0.46h^{-1}${/TEX}, respectively. Major microorganisms in the mixed culture at the log-phase were HY3 and HY4, which occupied 70%. The degrading efficiency of fish waste by the mixed microorganisms was 2.3 times higher, compared to control. The total amount of free amino acids in the degraded products from fish wastes was 39g/100g protein and little odor was produced by the mixed microorganisms after 48 hours.

• Structural Engineering and Mechanics
• /
• v.65 no.6
• /
• pp.699-706
• /
• 2018

In the present contribution, fracture resistance of U-notched GPPS members under mixed mode I/III loading conditions is assessed by using the Averaged Strain Energy Density (ASED) criterion. This criterion has been founded based on the ASED parameter averaged over a well-defined control volume embracing the notch edge. The validation of the theoretical criterion predictions is evaluated through comparing with the results of a series of mixed mode I/III fracture tests conducted on rectangular-shaped GPPS specimens weakened by a single edge U-notch. A recently developed apparatus for mixed mode I/III fracture experiments is employed for measuring the fracture loads of the specimens. The test samples are fabricated with different notch tip radii with the aim of evaluating the influence of this major feature of the U-notched components on the mixed mode I/III fracture behavior. It is shown that the onset of brittle fracture in U-notched GPPS specimens under various combinations of tension and out-of-plane shear can well be predicted by means of the ASED criterion.

• Korean Journal of Materials Research
• /
• v.19 no.4
• /
• pp.207-211
• /
• 2009

In this study, we attempted to develop a convenient aluminizing process, using Al-Ti mixed slurry as an aluminum source, to control the Al content of the aluminized layer as a result of a one-step process and can be widely adopted for coating complex-shaped components. The aluminizing process was carried out by the heat treatment on disc and rod shaped S45C steel substrates with Al-Ti mixed slurries that were composed of various mixed ratios (wt%) of Al and Ti powders. The surface of the resultant aluminized layer was relatively smooth with no obvious cracks. The aluminized layers mainly contain an Fe-Al compound as the bulk phase. However, the Al concentration and the thickness of the aluminized layer gradually decrease as the Ti proportion among Al-Ti mixed slurries increases. It has also been shown that the Al-Ti compound layer, which formed on the substrate during heat treatment, easily separates from the substrate. In addition, the incorporation of Ti into the substrate surface during heat treatment was not observed.

• Computers and Concrete
• /
• v.17 no.3
• /
• pp.423-433
• /
• 2016

After the industrial of steelmaking by-products are processed properly, they can be used in civil engineering, not only as a substitute for natural resources and to reduce costs, but also to provide environmental protection. This study used different amounts (10%, 20%, 30%, 40%,and 50%) of desulphurization slag to replace natural fine aggregates in ready-mixed soil materials, and tested the physical and fresh properties (slump, slump flow, tube flow, initial setting time, and bleeding) and hardened properties (compressive strength, ball drop, ultrasonic pulse velocity) of the materials. The variations between the performances of the materials with different mix proportions were discussed. When desulphurization slag is used in RMSM, the workability can be enhanced obviously significantly. When the replacement of desulphurization slag is 50%, the slump flow is increased by 110mm compared with the control group, and the initial setting time increases as the replacement increases, because of bleeding. When the replacement is 10% and 20%, the compressive strength at various ages is higher than that of the control group. When the replacement is 10%, the compressive strength at 7 days is higher than that of the control group by 60%, and the ultrasonic pulse velocity is proportional to the compressive strength, which increases with age and decrease as the replacement increases. An appropriate replacement can effectively accelerate construction, and allow projects to be finished ahead of schedule; therefore, an appropriate replacement, is applicable for ready-mixed soil materials.