• Korean Journal of Construction Engineering and Management
• /
• v.19 no.4
• /
• pp.52-60
• /
• 2018

In the construction industry, attempts to evaluate the environmental impact of products through life cycle assessment (LCA) approach has been on the rise. However, the domestic construction industry needs to make rapid decisions due to limited budget and schedule, so it is difficult to carry out a review of the environmental load on all resources. The decision-making process requires information on the major influence factors that should be focused on to reduce environmental load. And this information should be quantified so that it can be linked to environmental impact assessment. In this study, the LCA results of road construction cases were analyzed to provide such information. As a result, diesel, ready-mixed concrete, urethane-based paint, aggregate, and asphalt concrete were found to be the main factors that generated 93.17% of the environmental load in the earthwork type of road project. The total environmental cost caused by these affecting factors when constructing 1 km of earthwork type of road project is 242 million won. The analysis also shows that a 10% reduction in the amount of ready-mixed and asphalt concretes can reduce carbon emissions by 5.02% and 2.28% while reducing environmental costs by 11 million won per kilometer. In order to reduce carbon emissions of the earthwork type of road project, it is necessary to actively develop and introduce new methods and eco-friendly materials to reduce the overall use of ready-mixed concrete and asphalt concrete.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2001.11a
• /
• pp.8-13
• /
• 2001

In recently, polishing tile(porcelain homogeneous polished tile) was used in the construction field as a finishing material. But, there happened some problems such as tile exfoliation by construction condition in early ages. Also, in the dry wall system which used to lightweight wall, for use of polishing tile on dry wall, the examination of adhesive stability of polishing tile is needed. In this Paper, adhesive strength of Polishing tile was investigated by tile bond types on gypsum board and non asbestos board coated by tar-urethane and polymer modified cementitious waterproofing membrane(Series I). Then, the effect of heat stress and vibration was estimated on gypsum and non asbestos board(Series II).

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.05a
• /
• pp.127-131
• /
• 2008

The successful project management is based on definition of project goals in construction industry. The WBS(Work Breakdown Structure) is one of the major factors which defines works related to project goals. The necessity of the WBS for owners in multi complex projects which would help them to understand the whole project is rising because the multi-complex project in the construction industry has increasing recently. Therefore, this study suggests directions to establish the WBS for owners through investigating a concept of the multi-complex project first and analyzing types of project, domestic and foreign WBS, and case studies.

• Language and Information
• /
• v.5 no.1
• /
• pp.55-71
• /
• 2001

One of the controversial issues in English locative inversion (LI) construction( e. g. Under the tree sat a woman) has been the functional status of preverbal PP and postverbal NP, i.e. whether they are a subject, a complement, or filer (topic) Based on the distributional parallelisms between the PP and NP on the one hand and an ordinary subject and filler on the other this paper proposes that the PP has a dual function as a subject and filler, while the NP also has some subject properties that the PP does not have These mixed functional properties are analyzed in the theory of HPSG expecially with the versions recently developed by Sag(1997) Manning and Sag(1999) and Ginzburg and Sag(to appear). This analysis claims that the LI construction needs to satisfy two general, independent constraints head-subject- phrase and head-filler-phrase. This position suggests that the English LI construction is an instance of the peripheral phenomena whose construction specific constraint is inherited from more general core constraints. (Dongseo University)

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.1271-1274
• /
• 2009

One of the landslide, Debris flow means flow mixed of rocks, gravels, sand and soil with water. Debris flow occurred in summer by passed the rainy season and typhoon. Especially, Localized heavy rain derived from abnormal weather caused debris flow independent of season. It is increase to collapse of house, bridge, roads by debris flow but countermeasure studies about occurrence cause, movement pattern, damage scale about debris flow are insufficient. This study performed debris flow model experiment using dry material and calculated shock force predicted debris flow occurrence.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.128-129
• /
• 2017

Concrete properties alone cannot provide satisfactory waterproof performance because concrete can generate cracks due to possible problems in design, construction and curing process, and various environmental factors. Therefore, concrete structures require installing waterproofing layers for concrete protection and various types of construction methods are currently being applied. The purpose of this study is to investigate the concrete strength changes when waterproofing admixtures are mixed into the concrete. The results of flexural strength testing confirmed that the initial strength of concrete specimens with the admixtures was lower than that of the concrete specimen without the admixture based on different curing periods.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.2
• /
• pp.15-22
• /
• 2008

Recently loess are used as design and construction materials in some construction sites. However, many problems have come to the fore because the loess was considered merely as ordinary soil, not taking the engineering characteristics of loess into account at all. The purpose of this study is to effectively mix and use the oyster shell-which is the byproduct of oyster farming in the clean and pure water zone of Southwestern region-with loess in a bid to increase the utility, considering that loess itself has the limit for civil engineering purpose, and research the usability of oyster shell as an alternative material for construction.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.161-167
• /
• 2009

This paper offers a competitor analysis model for use by contractors as parts of more informed approach in identifying key competitors, and as a basis for formulating bidding strategies. Linear mixed model approach is used in measuring competitiveness between bids (by using bid competitiveness percentage) according to: (i) project size, (ii) work sector; (iii) work nature; and (iv) number of bidders. The model was tested empirically by application to a bidding dataset obtained from a large Hong Kong contractor. Allowing for heterogeneity across competing contractors (i.e. with the model parameters that varied across contractors), the results indicate that competitiveness in bidding of this contractor is generally greater than the majority of his competitors.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.185-186
• /
• 2023

Recently, a lot of nano-scale material technology development and research have been conducted in construction fields to improve the compressive strength and durability of cement-based Composites. There are some studies that have confirmed the properties and application effects of cement-based complex using each nanomaterial, but development and research using both materials are relatively limited. This study sought to confirm the effect of multi-wall carbon nanotubes (MWCNT) and nanosilica, which are representative construction nanomaterials, on the compressive strength, voids, and microstructure formation of cement. The purpose was to produce a cement composite by changing the mixing rate of the two nanomaterials, and to find the optimal mixing amount considering its mechanical and rheological properties.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.193-194
• /
• 2023

Recently, research is being conducted on geopolymers using industrial by-products as a cement substitute to reduce carbon dioxide emissions from the construction industry. Since geopolymers use industrial by-products, their performance varies depending on the type of alkali activator used, curing temperature, etc. Therefore, as part of a study to reduce carbon dioxide emissions from the construction industry, this study mixed blast furnace slag powder and ferronickel slag powder as cement substitutes, and compared and analyzed the fluidity and compressive strength of no-cement composites according to curing temperature.