• Journal of the Korean Geosynthetics Society
• /
• v.16 no.4
• /
• pp.13-20
• /
• 2017

In this study, laboratory tests were performed to evaluate for new filling materials (ZA-Soil) for bored pile that were developed using by high calcium ash. As a result of laboratory test, the uniaxial compression strength of 2 types of ZA-Soil are shown 68.0% and 64.6% compared to ordinary portland cement. And it have a suitable flowability and environmental stability. Also, after 28days, uniaxial compression strength of material mixed with soil and high strength filling material (ZA-Soil) for bored pile is 1.10-1.23 times bigger than material mixed with ordinary portland cement.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.1
• /
• pp.15-22
• /
• 2022

In this study, the hydration reaction and strength characteristic of cement mortar with spent coffee ground(SCG) was investigated. As a result of the study, it was found that as the firing temperature of the SCG increased, the mass loss due to the combustion of organic matter increased, but the density increased. In addition, when the SCG were mixed, SCG interfered with the hydration reaction and the compressive strength was significantly lowered. On the other hand, the coffee grounds ash(SCG_Ash) calcined at 800 ℃ showed a hydration reaction and a compressive strength equivalent to or higher than that of OPC mortar.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.4
• /
• pp.29-35
• /
• 2009

Pyrolysis is recently used as one of alternative methods of animal waste treatment. In this study bio-oil was produced at $550^{\circ}C$ in an auger reactor through pyrolysis process. Two pig waste mixtures were used, pig feces mixed with rice husks and pig feces mixed with sawdust. The main compositions of hemicellulose, lignin, cellulose, protein, and fat were analyzed chemically. Based on the main composition results obtained, the contents of holocellulose (the sum of hemicellulose and cellulose) and lignin had a significant positive effect on bio-oil production, and there was a significant negative effect of ash content on bio-oil yield. The interactions between the different feedstocks were evaluated, and it was concluded that the interaction between pig feces and rice husks was minimal, whereas the interaction between pig feces and sawdust was significant.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.10a
• /
• pp.25-29
• /
• 1995

To perform high-strength of concrete, fine powers of pozzolan such as fly ash, silica fume mixed with cement. But mobility of cement and concrete decreased due to using of these powers. To control decrease of this mobility, it is required that mobility is improved by using of chemical admixture such as superplasticizer. We used admixtures -NSF, NM-2, NT-2 etc- in order to improve mobility of cement paste being substituted by 10, 20% of pozzolans respectively. It proved that optimum dosage of NSF, NT-2 was 2.0% for being substituted 10%, 3.0% for 20% so as to increase mobility of cement paste mixed paste mixed with fine powers of pozzolan at W/C=0.40.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.136-137
• /
• 2018

The properties of concrete produced by ready mixed concrete company in Busan were measured. Because the concrete was mixed with blast furnace slag and fly ash etc., the compressive, tensile strength and chloride ion diffusion coefficient were lower than OPC concrete even though the specified concrete strength was same. If the durability about salt attack were satisfied, the concrete of lower specified concrete strength would be adopted to concrete mixing design. FEM analysis was carried out to predict the life time expectancy.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.79-80
• /
• 2019

This study was intended to examine the possibility of reducing hydration heat by FA substitution and combination of slag (CGS) from coal gasification power generation (IGCC) with mixed aggregate for concrete. The analysis results showed good results if liquidity increases as the ratio of CGS increases, air volume decreases, and compressive strength is mixed up to 25% in the residual aggregate. The results showed that the heat of hydration was reduced compared to plain due to the boron content of CGS as the CGS substitution rate increased, but it was larger due to the combination with FA substitution. It was found that the heat of hydration was reduced.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.202-210
• /
• 2005

In this study, the fly ash was employed as a possible alternative to the bentonite for its high sorption capacity against cationic heavy metal. To consider the constituents of barrier possibly used, the specimens were mixed with different material contents (fly ash : weathered soil : bentonite), then sorption test was performed. Also the specimens were molded on the wet side of optimum moisture contents like mixing ratio of sorption test and their hydraulic conductivities were measured in flexible-wall permeameters. And to confirm the effect of dissolved cations, the hydraulic conductivity tests were repeated by converting the permeant liquids from water to $Cd^{2+}$ solution. Finally, the Cd-concentration at the effluent was analyzed for 500hrs to compare the effectiveness of each specimen in contaminant retardation. Test results showed that the more the ratio of fly ash increase, the more Kd value increase, and the hydraulic conductivity of weathered soil/bentonite (95:5) mixture was the lowest $(2.9*10^{-8}cm/sec)$, and specimens made of fly ash and fly ash/weathered soil mixtures showed similar hydraulic conductivity. Although the permeant liquid was changed from water to $Cd^{2+}$ solution, the hydraulic conductivity of all specimens except for weathered soil maintained similarly like before. Consequently, the initial breakthrough point of Cd in weathered soil specimen was observed at about 5hrs after the test started while that of fly ash specimens was not observed during the whole test period of 500hrs. The results implied that fly ash had a sufficient retardation capacity against contaminant transport possibly by its high sorption capacity although it showed little effect on the reduction of hydraulic conductivity. Based on the test results, it could be concluded that the fly ash can be possibly used as a suitable barrier material in containment system to attenuate the contaminant transport for its high retardation capacity and for the low cost.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.1
• /
• pp.55-61
• /
• 2023

This study aims to develop CLSM fill material for emergency restoration using landfill coal ash. As a result of examining physical properties such as particle size distribution and fines content of landfill coal ash, bottom ash, fly ash, and general soil were mixed, and SP was found to have a density of 2.03 and a residual particle pass rate of 7.8 %. CLSM materials that secure fluidity in unit quantities without using chemical admixtures such as glidants and water reducing agents have a high risk of material separation due to bleeding. As a result of this experiment, it was found that the bleeding ratio did not satisfy the standard in the case of the specimen with a large amount of fly ash and a lot of addition of mixing water. As a result of the compressive strength test, the strength development of 0.5 MPa or more for 4 hours was found to be satisfactory for the specimens using hemihydrate gypsum with a unit binder amount of 200 or more, and the remaining gypsum showed poor strength development. Although it is judged that landfill coal ash can be used as a CLSM material, it is necessary to identify and apply the physical and chemical characteristics of coal ash buried in the ash treatment plant of each power generation company.

• Culinary science and hospitality research
• /
• v.7 no.3
• /
• pp.145-161
• /
• 2001

In odor to develop fillet-type seasoner and mixed powder-type seasoner using smoked mackerel as primary material, processing conditions of the mackerel meat and flavoring extract from various materials were examined. The approximate composition of mackerel meat and mixed powde-type seasoner using mackerel as primary material were 10.9 and 11.7%, for moisture 79.1 and 57.2% for crude protein, 5.3 and 2.9% for crude lipid, and 4.3 and 24.6% for crude ash, respectively. It was suitable to simmer raw mackerel in 3% chitooligosaccaride solution at 8$0^{\circ}C$ for 10 min., for the enhancement of reaction their meat and chitooligosaccharide. Considering effect of type of woodsmoke on organoletic properties of mackerel after smoking, oak and mixture(oak wood ＋ citrus wood = 1 : 1) were superior to another woodsmoke, the smoking conditions favoring the most overall preference were 8$0^{\circ}C$, 25min. for smoking time, 20$0^{\circ}C$, 20min. for baking, and 10$0^{\circ}C$. 4hrs. for drying. The optimal material mixing ratio for mixed powder-type seasoner was powder of smoked mackerel 60%, dried anchovy 15%, dried sea tangle 10%. The most appropriate extraction condition of mixed powder seasoner with packing tea bag(10g/bag) was 98$^{\circ}C$ for 5min. in the boiling water.

• Resources Recycling
• /
• v.19 no.5
• /
• pp.68-74
• /
• 2010

The aim of this study is to investigate the behaviors of synthesis of Calcium Chloroaluminte($11CaO{\cdot}7Al_2O_3{\cdot}CaCl_2$) under the melting temperature of municipal solid waste incineration fly ash(MSWI fly ash); $900^{\circ}C-1300^{\circ}C$ of sintering temperature. A sludge generated from a water purification plant (SW) was also used to fill up $Al_2O_3$ source, which might be deficient in MSWI fly ash. MF and SW were mixed at mixing ratio of 10 to 7, which is the mole ratio of CaO to $Al_2O_3$ of calcium Chloroaluminte. Mixed samples were sintered in the opened sintering reactor and the closed sintering reactor, respectively. The results showed that calcium chloroaluminte was formed at $1,000^{\circ}C$ in both reactors, but the temperature of decomposition of calcium chloroaluminte depended upon sintering reactor type; an opened sintering reactor and a closed sintering reactor, owing to the vaporization velocity of Cl.