• 한국BIM학회 논문집
• /
• 제7권3호
• /
• pp.1-10
• /
• 2017

3D concrete printing technology builds structural components layer-by-layer with concrete extruded through a nozzle without using forms. This technology can simplify construction processes by optimizing design flexibility, construction time, and cost. Furthermore, the 3D printing technology is easy to make an irregularly shaped and function embedded building(or object) which is difficult to be constructed by conventional construction method. However, the 3D printing concrete is not suitable for current commercial standard and the material itself. It is also difficult to apply it to the construction site due to the lack of initial strength and the nozzle which is clogged during the process. The research of mix proportion design process for 3D printing concrete which differs from the conventional concrete is necessary in order to solve the problems. This paper aims to calculate the 3D printing concrete mix proportion design process based on the mix materials and performance information derived from the previous researches. Therefore, the usage variation range, mutual influence relationship, and the importance priority of the mix proportion are analyzed. Based on this results, the basic design process of 3D printing concrete which contains planning design phase, basic design phase and validating performance phase is suggested. We anticipate to confirm applicability verification about the actual production by referring to this 3D printing concrete mix proportion study. In the future, this study can be utilized for blueprint of the 3D printing concrete mix proportion.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.105-106
• /
• 2019

In this research, considering the practical conditions at field, thermal cracking method was suggested based on the comparative analysis between predicted value and actual value obtained from the actual structure member with optimum mix design. The optimum mix design was deduced from the various mix designs with various proportions of cementitious binder for upper and lower placement lifts of mat-foundation mass concrete. Therefore, it can be stated that applying low heat mix design and different heating technique between upper and lower placement lifts for mass concrete are efficient to control the thermal cracking. As future issues, based on the interpretation result value, we will select the optimal combination that is applied specifically to the actual site, and deeply analyze the correlation between the measured value and the analysis value through the combination and the test of the actual structure.

• 한국산학기술학회논문지
• /
• 제13권10호
• /
• pp.4832-4836
• /
• 2012

일반적으로 아스팔트 혼합물 배합설계는 많은 시간과 실험이 필요하다. 또한, 정밀한 배합설계 결과는 실험하는 사람의 숙련도와 밀접한 상관관계가 있다. 이러한 문제점을 해결하기 위하여 Bailey는 아스팔트 혼합물용 골재입도에 대한 연구를 통해 골재입도곡선에서 특정한 크기의 골재의 입도 및 통과중량비가 중요함을 제시하였다. 본 연구에서는 Bailey가 제안한 방법을 이용하여 19mm 밀입도 아스팔트 혼합물 및 미연방도로국의 배수성포장(PA 20mm) 혼합물에 대한 배합설계를 시행하였다. Bailey 방법을 이용한 아스팔트 혼합물용 골재입도 결정방법은 기존에 시행착오를 통합 배합설계방법에 비해 좀더 짧은 시간에 최적배합설계를 수행할 수 있음을 확인하였다. 19mm 밀입도 아스팔트 혼합물의 CA, $FA_c$, $FA_f$는 0.724, 0.440 및 0.455로 기준값을 만족하였다. PA 20mm 아스팔트 혼합물의 계산된 CA, $FA_c$, $FA_f$는 0.646, 0.476 및 0.450으로 기준값을 만족하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.747-750
• /
• 2004

Lightweight concrete is known for its advantage of reducing the self-weight of the structures, reducing the areas of sectional members as well as making the construction convenient. Thus the construction cost can be saved when applied. to . structures such as long-span bridge and high rise buildings. However, the lightweight concrete requires specific design mix method that is quite different from the typical concrete, since using the typical mix method would give rise the material segregation as well as lower the strength by the reduced weight of the aggregate. In order to avoid such problems, it is recommended to apply the design mix method of high performance self-compacting concrete for the lightweight concrete. Therefore, this study introduces a production of self-compacting concrete, PF-modified and improved version of Nan-Su's design mix method of self-compacting concrete. Through a series of test mixes conducted during the study, the quality of the concrete at its fresh condition has been evaluated per the 2nd class rating standards of self-compacting concrete published by JSCE, especially focused in its fluidity, segregation resistance ability, and filling ability.

• 대한토목학회논문집
• /
• 제30권6A호
• /
• pp.561-572
• /
• 2010

본 연구에서는 Bayesian 통계법을 이용한 성능기반형 배합설계방법(Perfomance Based Mixture Design, 이하 PBMD)을 고강도 콘크리트 배합설계에 활용하여 요구성능을 만족하는 고강도 콘크리트 배합비를 찾는 것을 목표로 하고 있다. PBMD 방법은 Bayesian 통계법을 통해 얻어진 만족도 곡선을 활용한 성능중심의 콘크리트배합설계과정으로서 어떠한 조건이나 환경에서도 쉽게 적용이 가능하여 현재의 설계기준을 대체할 수 있는 하나의 대안으로 생각된다. 고강도 콘크리트의 여러 가지 재료 성능 변수들을 구하기 위해 수행한 여러 가지 실험들의 결과를 바탕으로 고강도 콘크리트 배합설계 시 PBMD 방법의 적용가능성에 대해 검토하였으며 지역에 따른 환경조건, 사용 가능한 재료, 적용 가능한 콘크리트생산기술 등을 고려하여 목표성능을 만족시키는 최적의 콘크리트 배합비를 구하는 과정을 PBMD 방법을 적용한 예제를 통해 나타내었다. PBMD 과정을 적용한 고강도 콘크리트의 배합설계의 현장 적용성을 검토하기 위해 ACI에 기술된 결과와의 비교를 통해 그 유효성을 입증하였다.

• 한국도로학회논문집
• /
• 제6권4호
• /
• pp.65-73
• /
• 2004

마샬배합설계에서 얻어지는 안정도나 흐름은 혼합물의 역학적 특성을 제대로 반영하지 못하며 소성변형과의 상관성이 낮다. 그러므로 안정도나 흐름의 기준을 통과하는 배합으로 제조한 혼합물에서도 소성변형이 많이 발생된다. 따라서 본 연구의 목적은 국내에서 이용되는 마샬 방법과 미국의 수퍼페이브 방법으로 배합설계를 수행하여 각 방법의 혼합물 특성치의 차이점과 문제점을 확인하는데 있다. 이를 위하여 골재 세 종류, 한 종류의 아스팔트(AC 60-80), 두 종류의 골재 입도(19mm, 13mm)를 각각의 배합설계방법에 사용하여 총 12종류의 혼합물을 배합설계를 수행하여 최적아스팔트함량을 결정하였다. 이 결정된 최적아스팔트 함량으로 혼합물을 제조하여 특성치를 비교 분석하였다. 그 결과, 마샬 방법을 통해 결정된 아스팔트 함량이 수퍼페이브 방법에 의 한 함량보다 0.1$\sim$0.3% 포인트 정도 높게 나타났다. 이것은 마샬 방법이 수퍼페이브 방법보다 아스팔트 함량을 높게 결정되도록 골재입도가 주어졌기 때문인데 이것이 소성변형에 상대적으로 취약한 직접적인 원인이 되는지는 더 많은 연구가 필요할 것이다.

• 복식문화연구
• /
• 제17권4호
• /
• pp.653-662
• /
• 2009

The past Romanticism, which emphasized loveful, womanish property, has changed into new-concept Romanticism as it was harmonized with various emotional cultures and trends in the 21st century. New-concept romanticism is found in various fields ranging from personality, diversity and discrimination to emotion. It is appearing as a new style searching for taste as it is mixed and matched with other fields. In fashion, Romanticism and mix-and-match trend provide womanish feeling through the match with romantic chiffon, high-waisted pants and cashmere cardigan and show modern emotion through vest and short blazer. Therefore, it is necessary to reconsider the method to analyze and express fashion emotion style on the basis of mix-and-match trend of Romanticism. The purpose of this study is to analyze how Romanticism is expressed in the mix and match with other emotional style, predict direction of Romanticism style and establish the ground to find changing fashion trend accurately. The researcher expects that design development will be focused on the fashion, which is more various and characteristic and search for convenient, healthy life, on the basis of the analysis on mix and match shown in Romanticism fashion of the study. The researcher tried to provide the base of design development and assist design activation by using mix and match, which can create various new styles, accurately and understanding and predicting the fashion trend of the 21st century.

• 한국실내디자인학회논문집
• /
• 제20권2호
• /
• pp.147-155
• /
• 2011

The purpose of this study is to grope for plan methods through analyzing preferences on expression methods of materials for visual differentiation in hosing space. The results are as follows : First, we could know that finish material is the important element to make differential design in housing space. It is a effective method to use the color and material of finish materials. Second, we could find they preferred woods in materials and Y color, N9.5, bright and light in colors through grasping preference about types in material elements. The preferred texture is soft and the preferred patterns are solid and geometry. Third, it is a good method to mix materials which give us different season feeling, and to mix colors which are different tones to lead the differential design by materials in housing space. In case texture and patterns, what we mix similar things is the effective method. Fourth, preference of the expression method is manifested differently depending on the selected elements. so when we plan the housing, we have to consider that. lastly, I think this study will be a basic data on a study to differentiate the design of the residential space.

• 한국건축시공학회지
• /
• 제17권1호
• /
• pp.39-46
• /
• 2017

최근 건축물의 기초는 구조체의 안정성과 연관하여 두꺼운 매스콘크리트 형태가 설계되어지고 있다. 그런데, 이와 같은 매트 매스콘크리트는 800mm 이상의 두꺼운 부재로 설계되는 경우가 많아짐에 따라 수화열에 의한 균열이 문제점으로 제기 되고 있다. 이에, 본 연구에서는 상 하부를 구분하여 타설하는 실무조건을 고려하여, 컴퓨터 프로그램상으로 하부와 상부의 최적치를 도출한 다음, 실구조체에 적용 해석치와 실측치간을 비교하므로서 효율적인 수화열균열 저감방안을 제안하고자 하였다. 그 결과, 상 하부 타설 콘크리트간의 저발열 배합정도를 고려한 수화발열량차 적용은 침하균열 방지 및 수화열 균열제어에 효과적인 것으로 밝혀졌다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 가을 학술발표회 논문집
• /
• pp.115-120
• /
• 1994

Recently super-flowing concrete has been developed and used in many construction sites in Japan. It is believed that super-flowing concrete will change the construction method and contribute to the durability of concrete structures. In this study the effect of mix proportion on the flowing characteristics of super-flowing concrete was investigated to establish the mix design method. From the result we have found that self-compactability of super-flowing concrete was greatly affected by the unit gravel volume and paste/gravel volume ratio. Therefore the two parameters can be used in mix design of super flowing concrete.