• 한국자동차공학회논문집
• /
• 제23권6호
• /
• pp.591-600
• /
• 2015

The efficiency of a powertrain system of hybrid vehicle is highly dependent on the design and control of the hybrid powertrain system. In other words, the optimal design of the powertrain systems is coupled with optimal control of the powertrain system. Therefore, the solution of an optimal design problem for hybrid vehicles is computationally and timely very expensive. For example, dynamic programming, which is a recursive optimization method, is usually used to evaluate the best fuel economy of certain hybrid vehicle design, and, thus, the evaluation takes tens of minutes to several hours. This research aims to accelerate the speed of efficiency evaluation of hybrid vehicles. We suggest a mathematical treat and a methodological treat to reduce the computational load. The mathematical treat is that the dynamics of system is discretized with sparse sampling time without loss of energy balance. The methodological treat is that the efficiency of the hybrid vehicle is inferred by characteristic loss evaluation that is computationally inexpensive. With the suggested methodology, evaluating a design candidate of hybrid powertrain system is taken few minutes, which was taken several hours when dynamic programming is used.

• 전력전자학회논문지
• /
• 제6권2호
• /
• pp.191-201
• /
• 2001

현재 산업용, 가정용 전동기의 수요는 급증하고 있다. 이는 스위칭 소자와 제어기술의 현저한 진보가 있었기 때문이며 이중 BLDC 전동기의 사용이 증가하고 있다. 그러나 일반적으로 사용되고 있는 3상 BLDC 전동기 맥동토크가 크고 속도변화에 민감하며 높은 속도에 적용하는데 한계가 있다. 이러한 문제를 해결하기 위해서는 전동기의 상과 극수, 슬롯수를 증가시켜야만 한다. 그래서 현재 다상 BLDC 전동기의 연구가 진행중에 있다. 하지만 다상 BLDC에서는 높은 스위칭 주파수로 인해서 일반적으로 쓰고 있는 히스테리시스 전류제어기를 제안하였고 7상 BLDC 전동기에 적용하여 시뮬레이션과 실험을 통해서 타당성을 입증하였다.

• 한국ITS학회 논문지
• /
• 제16권3호
• /
• pp.110-119
• /
• 2017

본 연구에서는 긴급차량 우선신호 센터제어 알고리즘을 개발하였다. 센터제어는 긴급차량 출동 요청이 접수되면 긴급차량 경로의 각 교차로에 대하여 신호시간을 산출 및 적용한다. 긴급차량 출발 이전에 신호시간을 제어하기 때문에 대기차량을 보다 효과적으로 소거할 수 있다. 대부분의 기존 연구에서는 긴급차량 도착 시점에 부도로의 녹색현시를 종료하는 preemption 방식을 적용하였다. 본 연구에서는 현시순서를 변경하지 않기 위해 Green Extension과 Early Green만을 적용하였고 각 현시별 최소녹색시간을 보장하였다. 시뮬레이션 결과, 신호를 제어하였을 때 긴급차량의 지체는 신호를 제어하지 않았을 때에 비해 감소하는 것으로 나타났다. 향후 본 연구에서 제시한 센터제어 알고리즘에 현장제어를 결합하여 긴급차량의 실시간 위치와 교차로 통과 여부를 반영하면 긴급차량의 지체를 추가로 감소시킬 수 있을 것으로 기대된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.837-843
• /
• 1999

A common hydraulic jack using brdige retrofit has a problem of increasing cost and time of construction to construct additionally temporary bent or concrete bracket, in case of insufficiency work space and release hydraulic pressure. To solve the problem, this technique is developed to alternate the bridge bearing in adequate inspection condition. After control maximum lift-height and minimum lift-force of no damage to super structure, the constructive technique is to alternate and repair the bridge bearing using the wedge jack with bridge bearing ability that is no release hydraulic pressure stopper, and able to reuse separable cylinder.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.429-433
• /
• 2000

Recently the demand of motor for industrial household machinery is increasing. As Switching devices and control technology are progressing so the use of BLDC Motor is increasing But 3-Phase BLDC Motor generally used has pulsating torque and speed variation in commutation so the range of it's application is limited high speed application Especially to solve these problems it is necessary to increase phase to Motor so study of Poly-Phase BLDC Motor is progressing. In this paper we designed 7-Phase BLDC Motor drive system and MSTC(Minimum Switching Time Controller)

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.100-105
• /
• 1993

This paper discusses an approach to real-time path-planning of mobile robot navigating amidst multiple obstacles. Given an environment with the coordinates of known obstacles, the moving area of a mobile robot is divided into many patches of triangles with small edge length, in order to ensure a path better than those reported in the literature. After finding a minimum-distance to minimize the number of turns and total path-length by two-step path-revision and path-smmothing.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.417-422
• /
• 1993

Robots working in the multiple robot system can perform the variety of tasks compared to the single robot system, while they are subject to the various tight constraints such as the precise coordination and the mutual collision avoidance during the task execution. In this paper, we provide an algorithm and graphical verification for collision avoidance between two robots working together. The algorithm calculates the minimum time delay for collision avoidance and the graphical verification is performed through the 3-D graphic simulator.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.332-336
• /
• 1991

Network management is responsible for gathering information on the usage of the network media by the network devices, ensuring the correct operation of the network, and providing reports. MAP network management must provide the high reliability of the media and signaling method, even in very harsh environments, providing a very low bit error rate and minimum number of retransmission. In this paper, we analysed the framework of OSI management and MAP network management and discussed the implementation method of fault management and remote management mechanism in the Mini-MAP controller developed for IBM-PC.

• ETRI Journal
• /
• 제6권1호
• /
• pp.3-9
• /
• 1984

This paper presents a direct adaptive poleplacement control scheme which is applicable to discrete-time non-minimum phase systems. It is proved that by this scheme the poles can be placed at the desired locations and the overall state vector of the system is uniformly bounded if the reference input is sufficiently rich, and also proved that in case of insufficiently rich reference input the overall system can still be stabilized though the poles may not be placed exactly at the desired locations. The effectiveness of this scheme is verified by digital computer simulations.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1402-1407
• /
• 2004

Moving a fragile object from an initial point to a goal location in minimum time without damage is pursued in this paper. In order to achieve the goal, first of all, the range of maximum acceleration and velocity are specified, which the manipulator can generate dynamically on the path that is planned a priori considering the geometrical constraints. Later, considering the impulsive force constraint of the object, the range of maximum acceleration and velocity are going to be obtained to keep the object safe while the manipulator is carrying it along the curved path. Finally, a time-optimal trajectory is planned within the maximum allowable range of the acceleration and velocity. This time optimal trajectory planning can be applied for real applications and is suitable for not only a continuous path but also a discrete path.