• Title/Summary/Keyword: minimum temperature

Search Result 2,218, Processing Time 0.038 seconds

Distribution and Species Composition of Phytoplankton in the Southern Waters of Korea and their Relation to the Character of Water Masses (한국남해의 식물플랑크톤의 분포와 수괴특성)

  • PARK Joo-Suck;LEE Sam-Geun
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.23 no.3
    • /
    • pp.208-214
    • /
    • 1990
  • Phytoplankton samples for this study were collected by Van Dorn Sampler at 28 oceanographic stations in the southern waters of Korea in February, April and August, 1988 to characterize the distribution and species composition of phytoplankton and their relation to the movement of water masses. During the study periods, phytoplankton standing crops in the southern waters were maximum in April and minimum in February. When the geographical distribution and abundance of the phytoplankton were considered, the highest standing crops were found near the front zone formed between Cheju Island and Tsushima Island. Therefore, their abundance depends ell the location of the front zone. On the other hand, there were relatively low standing crops in the open sea off the coastal area from the front zone in February and August. The cause of the unusal low standing crops found in August at the station 205/01, the central part of the coastal area of the southern waters where the largest standing crops occurred in February and April, seems to be due to the intrusion of Tsushima warm waters. This is because the waters at the station have high temperature and salinity, poor dissolved oxygen and nutrient salts, which are identical to the characteristics of proper Tsushima warm waters. It seems that these warm waters may affect the poor productivity in this area. Seventy-two species in thirty-three genera of the phytoplankton were indentified from the samples. Among them, 61 species in 27 genera belong to diatoms and 12 species in 7 genera to dinoflagellates. The largest number of phytoplankton species occurred in August while the largest number of the tells in April. Predominant species were Eucampia zodiacus in February, Skeletonema costatum and Chaetoceros curvisetus in April and Chaetoceros affinis in August. Eucampia zodiacus which was dominant in February and April seems to be a indicator of the southern coastal waters of Korea and mixed waters west of Cheju Island.

  • PDF

The Medium Optimization through Continuous Culture of an Methanol Utilizing Bacterium for SCP Production (SCP 생산용 메탄올 자화균주의 연속배양에 의한 배지 최적화)

  • 김창호;김태진홍석인
    • KSBB Journal
    • /
    • v.5 no.4
    • /
    • pp.355-363
    • /
    • 1990
  • Methanol-utilizing bacterium isolated from sewage samples in Seoul showed optimal temperature and pH of $33^{\circ}C$ and 7.1 for growth, respectively. The maximum specific growth rate was $0.42hr^{-1}$. The minimum medium composition was reconstituted depending on the surplus and the deficit of each component in the basal medium at steady state. The optimal composition was given as(g/l); Methanol 40, $(NH_4)_2\;SO_42, \;KH_2PO_4\;1.5, \;K_2HPO_4\;0.2, \;H_3PO_4\;0.79, \;Na_2HPO_4{\cdot}12H_2O\;0.15, \;MgSO_4{\cdot}7H_2O\;1.5, \;FeSO_4{\cdot}7H_2O\;0.034, \;MnSO_4{\cdot}4H_2O\;0.005, \;CuSO_4{\cdot}5H_2O\;0.0027, \;CaCl_2{\cdot}2H_2O\;0.25, \;ZnSO_4{\cdot}7H_2O\;0.007, \;(NH_4)_6\;Mo_7O_{24}{\cdot}4H_2O\;0.00048, \;H_3BO_3\;0.00068, \;CoCl_2\; 0.00024$ Under the continuous culture with optimum medium the maximum cell productivity was 3.8g/1/hr at dilution rate $0.23hr^{-1}$. Maximum cell concentration and its protein content were 19.5g/l and 70% at dilution rate of $0.1hr^{-1}$, respectively.

  • PDF

Department of DNA Chromatographic System for On-Site Detection of Food-Contaminating Bacteria (식중독균 현장탐지를 위한 DNA 크로마토그래피 분석시스템의 개발)

  • 김석하;정우성;백세환
    • KSBB Journal
    • /
    • v.18 no.3
    • /
    • pp.190-196
    • /
    • 2003
  • An analytical system detecting DNA particularly utilizing a concept of membrane strip chromatography initially applied to home-version tests for, such as, pregnancy and ovulation has been developed. We have chosen S. typhimurium as model analyte among food-contaminating microorganisms that occurred in high frequencies, and invA gene, as a detection target, specific to Salmonella species. This gene was able to be amplified by PCR under optimal conditions employing newly designed primers in our laboratory. The PCR product was specifically measured via hybridization between the analyte and a DNA probe, which was a totally different feature from the conventional gel electrophoresis detecting the products based only on the molecular size. It is notable thar the DNA probe sequence was specially designed such that no separation of excess primers present after PCR was required. This was immobilized on a nitrocellulose (NC) membrane via streptavidin-biotin linkage minimizing a steric effect when the hybridization with the amplified DNA took place. The analyrical system detected the microorganism in a concentration of minimum $10^3$ cfu/mL (i.e., 10 cells per system), estimated from the standard curve, 20 to 40 minutes after adding the sample. This sneitivity was approximately 10 times higher than that of gel electrophoresis as an analytical tool conventionally used. Furthermore, the assay was able to be run at room temperature, which would ofter an extra advantage to users.

Effect of Sputtering Powers on Mg and Ga Co-Doped ZnO Thin Films with Transparent Conducting Characteristics (RF 마그네트론 스퍼터를 이용하여 제작한 MGZO 박막의 구조적 및 전기적, 광학적 특성에 미치는 스퍼터링 전력의 영향)

  • Kim, In Young;Shin, Seung Wook;Kim, Min Sung;Yun, Jae Ho;Heo, Gi Seok;Jeong, Chae Hwan;Moon, Jong-Ha;Lee, Jeong Yong;Kim, Jin Hyoek
    • Korean Journal of Materials Research
    • /
    • v.23 no.3
    • /
    • pp.155-160
    • /
    • 2013
  • ZnO thin films co-doped with Mg and Ga (MxGyZzO, x + y + z = 1, x = 0.05, y = 0.02 and z = 0.93) were prepared on glass substrates by RF magnetron sputtering with different sputtering powers ranging from 100W to 200W at a substrate temperature of $350^{\circ}C$. The effects of the sputtering power on the structural, morphological, electrical, and optical properties of MGZO thin films were investigated. The X-ray diffraction patterns showed that all the MGZO thin films were grown as a hexagonal wurtzite phase with the preferred orientation on the c-axis without secondary phases such as MgO, $Ga_2O_3$, or $ZnGa_2O_4$. The intensity of the diffraction peak from the (0002) plane of the MGZO thin films was enhanced as the sputtering power increased. The (0002) peak positions of the MGZO thin films was shifted toward, a high diffraction angle as the sputtering power increased. Cross-sectional field emission scanning electron microscopy images of the MGZO thin films showed that all of these films had a columnar structure and their thickness increased with an increase in the sputtering power. MGZO thin film deposited at the sputtering power of 200W showed the best electrical characteristics in terms of the carrier concentration ($4.71{\times}10^{20}cm^{-3}$), charge carrier mobility ($10.2cm^2V^{-1}s^{-1}$) and a minimum resistivity ($1.3{\times}10^{-3}{\Omega}cm$). A UV-visible spectroscopy assessment showed that the MGZO thin films had high transmittance of more than 80 % in the visible region and that the absorption edges of MGZO thin films were very sharp and shifted toward the higher wavelength side, from 270 nm to 340 nm, with an increase in the sputtering power. The band-gap energy of MGZO thin films was widened from 3.74 eV to 3.92 eV with the change in the sputtering power.

Flowering Characteristics and Optimal Harvest Time in Wasabia japonica Mastum (고추냉이의 개화(開花) 특성(特性) 및 채종적기(採種適期))

  • Lee, Sung-Woo;Park, Chang-Hwan;Kim, Suk-Dong;Choi, Keong-Gu
    • Korean Journal of Medicinal Crop Science
    • /
    • v.6 no.3
    • /
    • pp.227-231
    • /
    • 1998
  • Flowering characteristics and optimal harvest time for seed of wasabi variety. Daruma, were investigated from Dec. 1995 to June 1996 in film house of Suwon. The number of peduncle was $10.2{\pm}2.29$ and most of the peduncle emerged between Jan. 20 and Feb. 10. Average peduncle length was $124{\pm}29.60cm$ and the peduncle grew most rapidly in the middle of march. Flowering started on Jan. 27 and lasted until June 4 with a peak at march 21 and flowering period was $99{\pm}21.32$ days. Flowers which bloomed later than the middle of March set seed but those bloomed earlier became sterile because days with minimum temperature below freezing occurred until the middle of March. Maturing period was $37.5{\pm}2.60$ days and total seed set was $43.2{\pm}8.77%$ in the natural culture condition. Optimal harvest time for seed was the last ten days of May and seed yield per $m^2$ was $79.0{\pm}19.94g%$(11,177 seeds).

  • PDF

The Design of Feature Selection Classifier based on Physiological Signal for Emotion Detection (감성판별을 위한 생체신호기반 특징선택 분류기 설계)

  • Lee, JeeEun;Yoo, Sun K.
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.50 no.11
    • /
    • pp.206-216
    • /
    • 2013
  • The emotion plays a critical role in human's daily life including learning, action, decision and communication. In this paper, emotion discrimination classifier is designed to reduce system complexity through reduced selection of dominant features from biosignals. The photoplethysmography(PPG), skin temperature, skin conductance, fontal and parietal electroencephalography(EEG) signals were measured during 4 types of movie watching associated with the induction of neutral, sad, fear joy emotions. The genetic algorithm with support vector machine(SVM) based fitness function was designed to determine dominant features among 24 parameters extracted from measured biosignals. It shows maximum classification accuracy of 96.4%, which is 17% higher than that of SVM alone. The minimum error features selected are the mean and NN50 of heart rate variability from PPG signal, the mean of PPG induced pulse transit time, the mean of skin resistance, and ${\delta}$ and ${\beta}$ frequency band powers of parietal EEG. The combination of parietal EEG, PPG, and skin resistance is recommendable in high accuracy instrumentation, while the combinational use of PPG and skin conductance(79% accuracy) is affordable in simplified instrumentation.

Physicochemical Properties of Rice Extrudate Added with Onion Kimchi Powder (양파김치 분말을 첨가한 쌀 압출팽화물의 이화학적 특성)

  • Keawpeng, Ittiporn;Kang, Seong-Koo;Park, Yang-Kyun
    • Food Science and Preservation
    • /
    • v.14 no.5
    • /
    • pp.504-510
    • /
    • 2007
  • An extrusion process was to make an onion kimchi snack from rice grit and onion kimchi powder, in an effort to enhance the nutritional value, flavor, and physicochemical properties of the extrudate. This study investigated optimum conditions (moisture content, barrel temperature, and the content of onion kimchi powder) for the production of high-quality rice extrudate products, and measured quality properties (water absorption index, texture, expansion ratio, and color) of rice extrudate to which onion kimchi powder had been added. Onion kimchi powder at 3%, 5%, 7%, and 10% (all w/w) was mixed with rice grit and the mixture then extruded in a twin-screw extruder. The texture of onion kimchi mack became softer as onion kimchi powder level rose, and water absorption ability increased. The expansion ratio and the lightness of extrudates decreased with increases in onion kimchi powder levels. The maximum water absorption index am the minimum hardness were obtained with 10% onion kimchi powder. Rice extrudate with 10% onion kimchi powder was suitable for extrusion cooking md obtained the highest score for overall acceptability by sensory evaluation.

The Study on the Structure and Energy State of Potassium-Graphite Intercalation Compounds (칼륨-흑연 층간화합물의 구조와 에너지 상태에 관한 연구)

  • 오원춘;백대진;고영신
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.3 no.1
    • /
    • pp.66-74
    • /
    • 1993
  • Potassium-Graphite Intercalation Compounds(K-GICs) have been prepared from purified natural graphite by transformed two-bulb method with variations of reaction temperature ($T_g:450^{\circ}C$, $400^{\circ}C$, $350^{\circ}C$, $300^{\circ}C$, $250^{\circ}C$).Prepared K-GICs were identified to stage transition process by X-ray diffraction data. At these results, d values of (00l) diffraction at 1 stage and 2 stage were corresponded to $5.35\AA$ and $8.73\AA$ respectively. The stage stability and energy states of K-GlCs were obtained by UV /VIS Spectrophotometric data. We found that the minimum value of reflectance was 2.67 eV(465nm) at $250^{\circ}C$and it's moved to higher energy than original graphite's. And X-ray diffraction and UV /VIS spectrophotometric datas suggest that K-GICs were formed lower stage and many charge carriers exist between C atoms of graphite. And then, these results also provide informations on the electrical and other physical properities of K-GICs.Especially, according to studied reports, d values differ from them of each author, but accurate values were established through this study.

  • PDF

A Study on Fabrication and Performance Evaluation of Wideband 2-Mode HPA for the Satellite Mobile Communications System (이동위성 통신용 광대역 2단 전력제어 HPA의 구현 및 성능평가에 관한 연구)

  • 전중성;김동일;배정철
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.3 no.3
    • /
    • pp.517-531
    • /
    • 1999
  • This paper presents the development of the 2-mode variable gain high power amplifier for a transmitter of INMARSAT-M operating at L-band(1626.5-1646.5 MHz). This SSPA(Solid State Power Amplifier) is amplified 42 dBm in high power mode and 36 dBm in low power mode for INMARSAT-M. The allowable error sets +1 dBm of an upper limit and -2 dBm of a lower limit, respectively. To simplify the fabrication process, the whole system is designed by two parts composed of a driving amplifier and a high power amplifier, The HP's MGA-64135 and Motorola's MRF-6401 are used for driving amplifier, and the ERICSSON's PTE-10114 and PTF-10021 are used the high power amplifier. The SSPA was fabricated by the circuits of RF, temperature compensation and 2-mode gain control circuit in aluminum housing. The gain control method was proposed by controlling the voltage for the 2-mode. In addition, It has been experimentally verified that the gain is controlled for single tone signal as well as two tone signals. The realized SSPA has 42 dB and 36 dB for small signal gain within 20 MHz bandwidth, and the VSWR of input and output port is less than 1.5:1 The minimum value of the 1 dB compression point gets 5 dBm for 2-mode variable gain high power amplifier. A typical two tone intermodulation point has 32.5 dBc maximum which is single carrier backed off 3 dB from 1 dB compression point. The maximum output power of 43 dBm was achieved at the 1636.5 MHz. These results reveal a high power of 20 Watt, which was the design target.the design target.

  • PDF

Studies of Solid-Liquid Phase Equilibria for Mixtures of N-vinyl-2-pyrrolidone+2-pyrrolidone and Growth Rate of N-vinyl-2-pyrrolidone Crystal Using Melt Crystallization (N-vinyl-2-pyrrolidone과 2-pyrrolidone 혼합물의 고-액 상평형 및 용융결정화를 이용한 N-vinyl-2-pyrrolidone의 결정성장속도 연구)

  • Kim, Sun Hyung;Seo, Myoung Do;Tak, Moon Seon;Kim, Woo Sik;Yang, Dae Ryuk;Kang, Jeong Won
    • Korean Chemical Engineering Research
    • /
    • v.51 no.5
    • /
    • pp.587-590
    • /
    • 2013
  • Solid-liquid equilibria for mixtures composed of n-vinyl-2-pyrrolidone (NVP) and 2-pyrrolidone were measured as a basic study for the melt crystallization process to remove 2-pyrrolidone as impurity included in NVP. A differential scanning calorimeter (DSC) and a crystallizer were used and the experimental results obtained from two methods were similar. The mixture showed a eutectic system which has a single composition at the minimum melting temperature. Calculation results from simple thermodynamic equations were found in general agreements with present data. To determine the growth rate of NVP crystal which is important for the design of crystallization process, thicknesses of the crystal were measured with the time using a layer melt crystallizer. The growth rates increased as cooling temperatures decreased. Heat transfer coefficient correlated from present data was found to successfully describe the crystal growth behavior.