• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2002.03b
• /
• pp.127-141
• /
• 2002

GIS환경에서 도시모형(urban model)의 적용을 목적으로 사회·경제적 데이터(socio-economic data)를 활용하는 과정은 도시현상이 갖는 복잡성과 변동성으로 인해 하나의 특정시간에서의 상황을 그대로 저장한 형태인 스냅샷 모형(snapshot model)만으로는 효율적인 공간분석의 실행이 불가능하다. 또한 도시모형을 적용하는 과정에서 GIS의 대상이 되는 공간, 속성, 시간의 정의는 분석목적에 따라 다르게 정의되어질 수 있으며 이에 따라 상이한 결과가 도출될 수 있다. 본 연구는 30년 간의 부산시 인구분포의 동적 변화과정 관측을 위해 시간개념을 결합한 Temporal GIS를 구축하고 이를 활용하여 인구밀도모형 및 접근성모형을 적용하는 과정을 통해 보다 효율적이고 다양한 결과를 제시할 수 있는 GIS 활용방안을 제시하고자 하였다. 흔히 공간현상의 계량화와 통계적 기법의 적용을 위한 데이터 처리과정은 많은 오차와 오류를 유발할 수 있다. 이러한 문제의 해결을 위해서는 우선적으로 분석목적에 맞는 데이터의 정의(Data Definition), 적용하고자 하는 모형(Model)의 유용성 검증, 적절한 분석단위의 설정, 결과해석의 객관적 접근 등이 요구된다. 이와 더불어 변동성 파악을 위한 시계열 자료의 효율적 처리를 위한 방법론이 마련되어져야 한다. 즉, GIS환경에서의 도시모형의 적용에 따른 효율성과 효과성의 극대화를 위해서는 분석목적에 맞는 데이터모델의 설정과 공간DB의 구축방법이 이루어져야 하며 분석가능한 데이터의 유형에 대한 충분한 고려와 적용과정에서 분석결과에 중대한 영향을 미칠 수 있는 요소들을 미리 검증하여 결정하는 순환적 의사결정과정이 필요하다., 표준패턴을 음표와 비음표의 두개의 그룹으로 나누어 인식함으로써 DP 매칭의 처리 속도를 개선시켰고, 국소적인 변형이 있는 패턴과 특징의 수가 다른 패턴의 경우에도 좋은 인식률을 얻었다.r interferon alfa concentrated solution can be established according to the monograph of EP suggesting the revision of Minimum requirements for biological productss of e-procurement, e-placement, e-payment are also investigated.. monocytogenes, E. coli 및 S. enteritidis에 대한 키토산의 최소저해농도는 각각 0.1461 mg/mL, 0.2419 mg/mL, 0.0980 mg/mL 및 0.0490 mg/mL로 측정되었다. 또한 2%(v/v) 초산 자체의 최소저해농도를 측정한 결과, B. cereus, L. mosocytogenes, E. eoli에 대해서는 control과 비교시 유의적인 항균효과는 나타나지 않았다. 반면에 S. enteritidis의 경우는 배양시간 4시간까지는 항균활성을 나타내었지만, 8시간 이후부터는 S. enteritidis의 성장이 control 보다 높아져 배양시간 20시간에서는 control 보다 약 2배 이상 균주의 성장을 촉진시켰다.차에 따른 개별화 학습을 가능하게 할 뿐만 아니라 능동적인 참여를 유도하여 학습효율을 높일 수 있을 것으로 기대된다.향은 패션마케팅의 정의와 적용범위를 축소시킬 수 있는 위험을 내재한 것으로 보여진다. 그런가 하면, 많이 다루어진 주제라

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.2
• /
• pp.62-73
• /
• 2020

Access management is aimed at preserving the road's high intercity mobility. In urbanized areas, immoderate acceleration lane-length requirements restrict the accessibility of land. Therefore, there are many opinions to revise the minimum acceleration lane-length requirement. For this purpose, it is important to diagnose the effects of slow vehicles on the mainline. This study analyzed a single merging vehicle's total delay occurrence depending on the mainline traffic flow rate and merging speed. A linear relationship was observed between the mainline traffic flow rate and total delay. As a merging speed increases gradually from 40km/h to 100km/h in 20km/h intervals, the total delay decreases by 5.0, 1.6, and 5.1 times, respectively. This shows that the ideal condition with the total delay is less than 0.5 vehicle·sec when there is no speed difference between the mainline and merging vehicle. On the other hand, given the one-second response time of drivers, the total delay occurrence was slightly low when the speed difference between the mainline and merging vehicle was less than 20km/h.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.4
• /
• pp.18-29
• /
• 2013

A new precast concrete (PC) beam and column connection system using non-prestressed wire strands was recently developed. The system is composed of one unit of two-storied PC-column and PC-beams with U-shaped ends. The connection part of the column and beams is reinforced by deformed bars and non-prestressed wire strands in combination for the improvement of workability. Structural performance of this system was verified by several experimental studies. The purpose of this study is developing a design concept of the beam reinforced by deformed bars and non-prestressed wire strands in combination, in terms of the cross-sectional analysis, based on the preceded experiment. A minimum and maximum reinforcement ratio and the calculation formula for the strength of flexural member reinforced by reinforcements having different yield strengths are derived based on KBC2009. Under consideration existing research results for the application of high strength reinforcement bars, the design yield strength of the non-prestressed wire strand is suggested. An example for the cross section design, satisfying the serviceability requirements, demonstrates the applicability of the design concept developed in the study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.709-717
• /
• 2016

In this study, the convenience and efficiency of vision-based displacement measurement (VBDM) to estimate the cable tension of cable-stayed bridges and the requirements for its effective application were examined. To demonstrate its convenience and efficiency, it was confirmed that VBDM can be accomplished with a minimum amount of equipment using a commercial camcorder. In this case, it was found that the accuracy of estimation of the natural frequencies is sufficient, even though magnitude errors can occur when conducting high-speed recording at the low resolution afforded by the minimal equipment employed. It was also confirmed that the most important factor in detecting the precise natural frequencies is the use of the appropriate frequency range in the tension estimation using vibration. Based on these results, a study was carried out on the accuracy variation of the estimated tension according to the frame rate of a commercial camcorder. For this purpose, an experiment was performed to estimate the cable tension in a cable-stayed bridge model. Through this experiment, the detectable tensions of cables with various natural frequencies as a function of the frame rate were summarized. As a result, it was shown that the frame rate should be determined based on the natural frequency which is estimated to be located within the appropriate frequency range (approximately 10~75% of theoretical range) considering the aliasing and low-frequency distortion due to excitations.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.05c
• /
• pp.501-506
• /
• 2002

사람은 누구나 잭이나 문서를 읽을 때 중요한 부분에 강조, 해설, 설명을 하기 위해서 표시를 하거나 글을 입력한다. 이와 같이 원본문서에 추가되는 부가 정보를 Annotation이라고 한다[6][7]. Annotation을 이용하면 차후에 원본문서를 재창조하거나 다른 사람이 원본문서를 참조할 경우 과중한 정보의 양을 극복할 수 있으므로[4], 원본문서의 이해도를 향상시킬 수 있다. 따라서, Annotation은 한번 사용하고 그치는 정보가 아닌 재사용할 수 있는 점보임을 의미한다[1,2,3]. 이러한 Annotation 기능을 웹 문서에 적용하게 되면 종이문서에서 얻을 수 있는 장점뿐만 아니라 웹 환경의 특징인 공유[5], 검색[4], 재편집 등의 기능이 가능하다. 이와 관련한 많은 연구가 진행중에 있다. 그러나, 기존의 Annotation 연구는 Anchor 입력된 다수의 Annotation이 무의미한 출력 순서로 제공되고 있으며, 또한 Anchor에 입력된 Annotation의 출력으로 인해 문서 구조가 변경되거나, 가려지는 등의 문제점으로 사용자들이 쉽게 사용 및 이해할 수 있는 Annotation 출력 인터페이스에 대한 연구가 부족한 실정이다. 따라서, 본 논문에서는 Anchor에 입력된 다수의 Annotation들 간의 의미적 순서를 부여하여 보다 적절한 Annotation에 대한 우선 접근이 가능하도록 계층적인 Annotation 우선처리 기법을 제안하고, Annotation 출력으로 인한 문서 변경 문제를 해결하기 위한 유동적인 Annotation 표현 기법을 제안한다. 또한 Annotation이 문서에 부가된 부가정보의 역할을 뿐만 아니라, 다양한 활용이 가능하도록 XML 표준에 기반한 저장 구조를 지원하며, 원본문서와 분리하여 저장한다.속도를 개선시켰고, 국소적인 변형이 있는 패턴과 특징의 수가 다른 패턴의 경우에도 좋은 인식률을 얻었다.r interferon alfa concentrated solution can be established according to the monograph of EP suggesting the revision of Minimum requirements for biological productss of e-procurement, e-placement, e-payment are also investigated.. monocytogenes, E. coli 및 S. enteritidis에 대한 키토산의 최소저해농도는 각각 0.1461 mg/mL, 0.2419 mg/mL, 0.0980 mg/mL 및 0.0490 mg/mL로 측정되었다. 또한 2%(v/v) 초산 자체의 최소저해농도를 측정한 결과, B. cereus, L. mosocytogenes, E. eoli에 대해서는 control과 비교시 유의적인 항균효과는 나타나지 않았다. 반면에 S. enteritidis의 경우는 배양시간 4시간까지는 항균활성을 나타내었지만, 8시간 이후부터는 S. enteritidis의 성장이 control 보다 높아져 배양시간 20시간에서는 control 보다 약 2배 이상 균주의 성장을 촉진시켰다.차에 따른 개별화 학습을 가능하게 할 뿐만 아니라 능동적인 참여를 유도하여 학습효율을 높일 수 있을 것으로 기대된다.향은 패션마케팅의 정의와 적용범위를 축소시킬 수 있는 위험을 내재한 것으로 보여진다. 그런가 하면, 많이 다루어진 주제라 할지라도 개념이나 용어가 통일되지 않고 사용되며 검증되어 통용되는 측정도구의 부재로 인하여 연구결과의 축적이 미비한 상태이다. 따라서, 이에 대한 재고와 새로운 방향

• The Korean Journal of Archival Studies
• /
• no.75
• /
• pp.177-212
• /
• 2023

Private archives are an important indicator of understanding a society that contains various memories, the lives and experiences of members, daily lives, morality, and values. Recently, as diversity has emerged as an important value in Korean society, a number of individuals and communities have been appeared based on different bases and purposes, and the contents, types, and categories of private archives produced from their voluntary activities have also diversified. These private organizations and communities are potential targets for producing and holding private archives, but most of them do not have the minimum infrastructure or system for management of archives, and the foundation for management of archives is weak only to be supported with the voluntary will and activities of the private sector. Therefore, there is a need for a plan to support activities to manage archives suitable for each organization's level while respecting the unique characteristics and methods of the private sector within the national management system of archives. In addition, since it is difficult to solve all issues related to management of archives in the private sector with only a small number of process topics, a cooperative system should be established to sustain activities to manage archives on its own through networks between private sectors. In this study, we intend to propose a 'private archives information network platform (hereinafter referred to as a platform)' as a way to establish a communication and network foundation between private sectors and share resources with each other. Based on the results of analysis of cases of building network between private sectors and expected user requirements, we would like to establish a vision and target model of the platform and discuss ways to continuously operate the platform.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.3
• /
• pp.12-19
• /
• 2023

In the case of the construction industry, the relationship between process and cost should be appropriately distributed so that the finished product can be delivered at the minimum fee within the construction period. At that time, it should be considered the size of the bridge, the construction method, the environment and production capacity of the factory, and the transport distance. However, due to various reasons that occur during the construction period, problems such as construction delay, construction cost increase, and quality and reliability degradation occur. Therefore, a systematic and scientific construction technique and process management technology are needed to break away from the conventional method. The prefab(Pre-Fabrication) is a representative OSC (Off-Site Construction) method manufactured in a factory and constructed onsite. This study develops a resource and process plan optimization system for the process management of the Nodular girder, a prefab bridge girder. A simulation algorithm develops to automatically test various variables in the personnel equipment mobilization plan to derive the optimal value. And, the algorithm was applied to the Paju-Pocheon Expressway Construction (Section 3) Dohwa 4 Bridge under construction, and the results compare. Based on construction work standard product calculation, actual input manpower, equipment type, and quantity were applied to the Activity Card, and the amount of work by quantity counting, resource planning, and resource requirements was reflected. In the future, we plan to improve the accuracy of the program by applying forecasting techniques including various field data.

• Journal of Cadastre & Land InformatiX
• /
• v.52 no.2
• /
• pp.17-34
• /
• 2022

With rapid advancements taking place in the Fourth Industrial Revolution, human-robot interactions have been garnering increasing attention. Robots are being actively adopted in building systems and facilities. In this study, we developed robot-friendly building certification indicators. Because these indicators were being developed for the first time, we focused only on commercial buildings. We conducted exploratory research using methodologies such as focus group interviews and the analytic hierarchy process. First, the concept of the robot-friendly building was defined through focus group interviews, and the requirements were categorized by the appropriateness of operating facilities and systems and the appropriateness of architectural and robot operating systems and networks. Next, the relative importance of the evaluation items (23 items in total) was calculated using the analytic hierarchy process. Their average score of the marks was 4.4, and the minimum and maximum were 2.0 and 11.3, respectively. This study is significant because we collected the basic data necessary to develop a one-of-its-kind evaluation system for certifying the robot-friendliness of buildings using scientific methods.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.2
• /
• pp.160-167
• /
• 2023

An INS is a composite navigation system providing "added value" so defined if work stations provide Multi-Function Displays(MFDs) integrating information and functions for navigational tasks. Even though the minimum requirements for an INS are defined by IMO performance standards, a generic list of the devices and functions that constitute an INS does not exist, so the configuration of the INS is different for each manufacturer, and guidelines based on users' perspectives are also insufficient. This study was conducted to enhance the usability of the INS by analyzing the information required by users according to the ship's operating status and tasks and effectively structuring it in the MFD of the INS. By analyzing INS-related international standards and manufacturers' component equipment lists, mandatory navigation information was selected and card sorting tests were conducted on ship operators with experience in using MFDs to group the information required for each INS task. The results of the study can serve as a basic guideline for manufacturers to structure information based on users' experience when designing products.

• Nutrition Research and Practice
• /
• v.16 no.sup1
• /
• pp.113-125
• /
• 2022

In the current years, it has now become necessary to establish standards for micronutrient intake based on scientific evidence. This review discusses issues related to the development of the 2020 Dietary Reference Intakes for Koreans (KDRI) for magnesium (Mg), zinc (Zn), and copper (Cu), and future research directions. Following issues were encountered when establishing the KDRI for these minerals. First, characteristics of Korean subjects need to be applied to estimate nutrient requirements. When calculating the estimated average requirement (EAR), the KDRI used the results of balance studies for Mg absorption and factorial analysis for Zn, which is defined as the minimum amount to offset endogenous losses for Zn and Mg. For Cu, a combination of indicators, such as depletion/repletion studies, were applied, wherein all reference values were based on data obtained from other countries. Second, there was a limitation in that it was difficult to determine whether reference values of Mg, Zn, and Cu intakes in the 2020 KDRI were achievable. This might be due to the lack of representative previous studies on intakes of these nutrients, and an insufficient database for Mg, Zn, and Cu contents in foods. This lack of database for mineral content in food poses a problem when evaluating the appropriateness of intake. Third, data was insufficient to assess the adequacy of Mg, Zn, and Cu intakes from supplements when calculating reference values, considering the rise in both demand and intake of mineral supplements. Mg is more likely to be consumed as a multi-nutrient supplement in combination with other minerals than as a single supplement. Moreover, Zn-Cu interactions in the body need to be considered when determining the reference intake values of Zn and Cu. It is recommended to discuss these issues present in the 2020 KDRI development for Mg, Zn, and Cu intakes in a systematic way, and to find relevant solutions.