• 한국토양비료학회지
• /
• 제48권4호
• /
• pp.246-254
• /
• 2015

This study explored the effect of rainfall pattern and soil characteristics on water management in rice paddy fields, using a soil water balance model, BUDGET. In two sites with different soil textural group, coarse loamy soil (Gangseo series) and fine soil (Hwadong series), respectively, we have monitored daily decrease of water depth, percolation rate, and groundwater table. The observed evapotranspiration (ET) was obtained from differences between water depth decrease and percolation rate. The root mean square difference values between observed and BUDGET-estimated ET ranged between 10% and 20% of the average observed ET. This is comparable to the measurement uncertainty, suggesting that the BUDGET model can provide reliable ET estimation for rice fields. In BUDGET model of this study, irrigation requirement was determined as minimum water need for maintaining water-saturated soil surface, assuming 100 mm of bund height and no lateral loss of water. The model results showed different water balance and irrigation requirement with the different soil profile and indicated that minimum percolation rate by plow pan could determine the irrigation requirement of rice paddy field. For the condition of different rainfall distribution, the results presented different irrigation period and amounts, representing the importance of securing water for irrigation against different rainfall pattern.

• Journal of Mechanical Science and Technology
• /
• 제17권4호
• /
• pp.511-520
• /
• 2003

In room acoustics, reverberation time is an important acoustic parameter. However it is often difficult to measure short reverberation times at low frequencies with a traditional band pass filter bank if the product of filter bandwidth (B) and reverberation time (T) is small. It it well known that the minimum permissible product of bandwidth and reverberation time of the traditional band pass filter is at least 16. This strict requirement makes it difficult to measure short reverberation times of an acoustic room at low frequencies exactly. In order to reduce this strict requirement, in the previous paper, the wavelet filter bank was developed and the minimum permissible product of bandwidth and reverberation time was replaced with 4. In the present paper it is demonstrated how the short reverberation times of an practical room at low frequencies are successfully measured by using the wavelet filter bank and the results are compared with the traditional method using a band past filer bank.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.1077-1080
• /
• 2002

In building acoustics, reverberation time is an important acoustic parameter. However, it is often difficult to measure short reverberation times at low frequencies using the traditional band pass filter bank if the product of bandwidth (B) and reverberation time (T) is small. It is well known that the minimum permissible product of bandwidth and reverberation time of the traditional band pass filter is at least 16 ［F. Jacobsen, J. Sound Vib. 115, 163-170 (1987)]. This strict requirement makes it difficult to measure short reverberation times of an acoustic room at low frequencies exactly. In order to reduce this strict requirement, recently, the wavelet filter bank is developed and the minimum permissible product of bandwidth and reverberation time is replaced with 4 [S. K. Lee, J, Sound Vib. 252, 141-153 (2002)]. In the present paper, it is demonstrated how the short reverberation times at low frequencies are successfully measured by using the wavelet filter bank. In order to present this job, two synthetic signals and one measured signal are used for impulse responses of an acoustic room.

• 한국컴퓨터정보학회논문지
• /
• 제20권10호
• /
• pp.53-59
• /
• 2015

In this paper we propose a resource management scheme which allocates hierarchical resources stepwise based on the users' QoS requirement of each service in the macro-femtocell overlaid LTE-Advanced network. Our proposed scheme adjusts the transmission rate to the minimum which guarantees the allowable minimum requirement of delay for each user service. In this way it minimizes the interference on the adjacent channels and it is able to increase the resource utilization efficiency. Simulation results show that our scheme provides better performances than the conventional one in respect of the outage probability and data transmission throughput.

• 한국철도학회논문집
• /
• 제7권4호
• /
• pp.326-331
• /
• 2004

A routing is the path that an actual trainset follows as it moves from one train to another train in a timetable. The number of routings is equivalent to the number of trainsets required to cover the timetable. The primary factors of rolling stock requirement plan include evaluating the minimum number of routings. This can be formulated as a set partitioning problem and solved using enumeration method or column generation method. In this paper we presents an enumeration algorithm which is useful to implement the enumeration method for the rolling stock requirement plan.

• 대한전자공학회논문지TC
• /
• 제40권10호
• /
• pp.103-109
• /
• 2003

기존의 Multiple-Subcarrier변조 방식에 4-차원(4-D)신호를 이용한 Optical Wireless통신 방식을 제안하였다. 4-D 신호는 신호파형 최적화 기술 (OSW, Optimization Technique of Signal Waveforms)을 이용하여 유도하고 Multiple-Subcarricr의 block coder에 적용함으로써 출력 신호점 간의 Euclidean distance를 최대화하였다. 그 결과 고정 dc 바이어스를 부가한 상태에서 시스템에서 요구되는 Normalized power를 QPSK에 비해 3 dB, Reserved Subcarrier 나 Minimum Power에 비해 최대 3.3 dB 를 각각 절감하였고 normalized bandwidth 1.125 ∼ 1.25의 범위에서 QPSK에 비해 평균 3 dB, Res. Subcarrier 방식에 비해 2 ∼ 4 dB, Min. Power 방식에 비해 0 ∼ 3 dB를 각각 절감하였다.

• 한국해안·해양공학회논문집
• /
• 제30권2호
• /
• pp.61-68
• /
• 2018

본 연구는 정상류 조건에서 폐기물 해상최종처리장에서의 오염원의 누출 방지에 필요한 최적의 최소기준을 제안하기 위하여 각각 바닥 및 연직 차수시스템의 기본적인 차수공에 대하여 침투 이류 분산해석을 수행하였다. 연구 결과 바닥 차수시스템의 최소기준으로 투수계수 $1{\times}10^{-6}cm/s$ 이하인 불투수성 지층이 두께 500 cm 이상이거나 이와 동등한 차수효과를 가진 차수시스템이어야 한다. 연직 차수시스템의 최소기준으로 투수계수 $1{\times}10^{-6}cm/s$ 이하인 두께 50 cm 이상이거나 이와 동등한 차수효과를 가진 차수시스템을 설치하여야 한다. 또한, 연직 차수시스템은 바닥 차수시스템과 일체가 되어 차수기능을 발휘하도록 충분한 근입깊이가 필요하다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.729-731
• /
• 2000

This paper presents a simple method for determining the minimum value of capacitance required for initiating self excitation in three-phase self-excited induction generator. Based on the steady-state equivalent circuit model, this paper presents simple and direct method to find the minimum capacitance requirement under R-L load. Using the loop impedance and nodal admittance. the minimum capacitance is determined by self excitation condition. These computed values can be used to predict practically the minimum value of the terminal voltage required for self-excitation. To maintain a constant terminal voltage, a method for determining the frequency, terminal capacitance, and exciting reactance is also described.

• Structural Engineering and Mechanics
• /
• 제56권2호
• /
• pp.317-340
• /
• 2015

Design codes have specified the minimum shear reinforcement requirement for reinforced concrete (RC) and prestressed concrete (PSC) members to prevent brittle and premature shear failure. They are, however, very different from one another, and particularly, ACI318 code allows the required minimum shear reinforcement to be reduced in PSC members, compared to that in RC members, by specifying the additional equation for PSC members whose basis is not clear. In this paper, the minimum shear reinforcement ratio for PSC members was proposed, which can provide a sufficient reserved shear strength and deformation capacity. The proposed equation was also verified by the test results of PSC specimens lightly reinforced in shear, comparing to design codes and other proposed equations from previous studies.

• 콘크리트학회논문집
• /
• 제23권5호
• /
• pp.559-567
• /
• 2011

효율적인 철근콘크리트 구조물을 설계 시공하기 위하여, 최근 들어 고강도 철근에 대한 연구가 활발히 진행되고 있다. 그러나 고강도 철근은 일반강도 철근에 비하여 연신 능력이 낮은 것이 일반적이므로, 기존의 최소 연신율규격을 만족하지 못할 가능성이 있다. 또한 국내외 철근 규격의 최소 연신율 규정과 표점 거리 규정은 각 규격마다 상이하여, 동일한 철근이라도 적용하는 규격에 따라 적합 여부가 다르게 평가된다. 따라서 각 철근 규격을 비교 검토하고, 국내의 철근 규격 KS D 3504의 규정이 합리적인지 검토할 필요가 있다. 이 연구에서는 한국, 미국, 일본, 유럽, ISO 등 국내외 철근 규격의 최소 연신율 규정과 표점 거리 규정을 비교 분석하고, 철근 인장시험을 통하여 규격의 엄격성을 평가하였다. 그 결과, 국내 철근 규격인 KS D 3504가 가장 엄격한 것으로 평가되었다. 이 엄격성 비교 결과를 바탕으로 KS D 3504의 일반용 철근 규격의 최소 연신율 규정을 수정할 것을 제안하였으며, 내진용 철근 규격을 제안하였다.