• Journal of Nutrition and Health
• /
• v.9 no.3
• /
• pp.8-17
• /
• 1976

This study was carried out to estimate the minimum protein requirement for the Korean college girls, and to see the effect of carbohydrate intake on the minimum protein requirement in the rat. In the first experiment, three students attending Ewha Womans University were given protein free diet for 7 days while caloric intake were adjusted to maintain constant body weight. Endogenous nitrogen excretion was measured to estimate their minimum protein requirement. Second experiment was carried out in 3 parts to find out the effect of carbohydrate intake on the minimum protein requirement using 15 female, 50 days old rats weighing 120g. Inexperiment 2-1, the rats were fed protein free diet for 9 days and endogenous nitrogen excretion was measured to determine the minimum protein requirement of the rats. In experiment 2-2, the minimum casein requirement of the rats needed to maintain nitrogen equilibrium was estimated by the least squares regression method feeding 3 different levels of casein determined from the result of experiment 2-1. Finally, in experiment 2-3, the rats were given the minimum casein requirement for 7 days with 3 different levels of carbohydrate to find out the effect of carbohydrate intake on the nitrogen balance. The results of this study were as follows. Experiment I. Daily endogenous nitrogen losses of 3 college girls were 1.89g in urine, 1.10g in feces and 0.0108g from skin since the total daily endogenous nitrogen loss was 3.0g and the total daily nitrogen intake was 0.52g, the minimum nitrogen requirement of these subjects was about 2.48g/day (15.5g protein/day). Experiment II. Experiment 2-1: daily endogenous nitrogen losses of the rats fed protein free diet were $22.63{\pm}0.48\;mg$ through urine and $13.12{\pm}0.47\;mg$ in feces. The total daily endogenous nitrogen ouput was $35.71{\pm}1.27\;mg$ and the minimum protein requirement of the rats was 225mg/day in this study. Experiment 2-2: the minimum casein requirement needed to maintain the rats in nitrogen equilibrium was determined to be 340mg/day. Experiment 2-3: the rats were given 350mg/day casein with 3 different levels of carbohydrate (12,26 or 46 Cal by sugar-cornstarch mixture). The nitrogen balances were measured to be +0.0021, +0.0073 and +0.0143 respectively and there were significant differences among 3 groups.

• Restorative Dentistry and Endodontics
• /
• v.49 no.1
• /
• pp.3.1-3.8
• /
• 2024

This article is a narrative review that discusses the recommended sample size requirements to design a pilot study to assess the reliability of a questionnaire. A list of various sample size tables that are based on the kappa agreement test, intra-class correlation test and Cronbach's alpha test has been compiled together. For all calculations, type I error (alpha) was set at a maximum value of 0.05, and power was set at a minimum value of 80.0%. For the kappa agreement test, intra-class correlation test, and Cronbach's alpha test, the recommended minimum sample size requirement based on the ideal effect sizes shall be at least 15, 22, and 24 subjects respectively. By making allowances for a non-response rate of 20.0%, a minimum sample size of 30 respondents will be sufficient to assess the reliability of the questionnaire. The clear guideline of minimum sample size requirement for the pilot study to assess the reliability of a questionnaire is discussed and this will ease researchers in preparation for the pilot study. This study provides justification for a minimum requirement of a sample size of 30 respondents specifically to test the reliability of a questionnaire.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.248-251
• /
• 2004

This study was performed to propose the minimum thickness of RC slab that satisfies constructibility, fatigue safety, and serviceability requirements such as deflection control. Three different minimum thicknesses are calculated using concrete shear and rebar fatigue formulas, and deflection control, respectively, and checked by constructiblity. The maximum of these three minimum thicknesses is proposed as the minimum thickness of RC slab, which shows that the minimum thickness requirement of RC slab from Korean Bridge Design Code can be thinner than now.

• Korean Journal of Remote Sensing
• /
• v.20 no.3
• /
• pp.189-196
• /
• 2004

This paper describes what an operational change detection tool requires and the software which was designed and developed according to the requirements. The top requirement for the application of the software to operational change detection was identified: minimization of false detections, missing detections and operational cost. In order to meet such a requirement, the software was designed with the concept that the ultimate decision and isolation of changes must be performed manually by visual interpretation and all automatic algorithms and/or visualization techniques must be defined as support functions. In addition, the modular structure of the proposed software enables the addition of a new support function with the minimum development cost and minimum change of the operational environment.

• Structural Engineering and Mechanics
• /
• v.69 no.1
• /
• pp.1-10
• /
• 2019

In the construction of flat plate slabs, which are widely used for tall buildings but have relatively low flexural stiffness, serviceability problems such as excessive deflections and cracks are of great concern. To prevent excessive deflections at service load levels, current design codes require the minimum slab thickness, but the requirement could be unconservative because it is independent on loading and elastic modulus of concrete, both of which have significant effects on slab deflections. In the present study, to investigate the effects of the construction load of shored slabs, reduced flexural stiffness and moment distribution of early-age slabs, and creep and shrinkage of concrete on immediate and time-dependent deflections, numerical analysis was performed using the previously developed numerical models. A parametric study was performed for various design and construction conditions of practical ranges, and a new minimum permissible thickness of flat plate slabs was proposed satisfying the serviceability requirement for deflection. The proposed minimum slab thickness was compared with current design code provisions and numerical analysis results, and it agreed well with the numerical analysis results.

• Computers and Concrete
• /
• v.14 no.3
• /
• pp.211-231
• /
• 2014

Prestressed hollow-core slabs (HCS) are widely used for modern lightweight precast floor structures because they are cost-efficient by reducing materials, and have excellent flexural strength and stiffness by using prestressing tendons, compared to reinforced concrete (RC) floor system. According to the recently revised ACI318-08, the web-shear capacity of HCS members exceeding 315 mm in depth without the minimum shear reinforcement should be reduced by half. It is, however, difficult to provide shear reinforcement in HCS members produced by the extrusion method due to their unique concrete casting methods, and thus, their shear design is significantly affected by the minimum shear reinforcement provision in ACI318-08. In this study, a large number of shear test data on HCS members has been collected and analyzed to examine their web-shear capacity with consideration on the minimum shear reinforcement requirement in ACI318-08. The analysis results indicates that the minimum shear reinforcement requirement for deep HCS members are too severe, and that the web-shear strength equation in ACI318-08 does not provide good estimation of shear strengths for HCS members. Thus, in this paper, a rational web-shear strength equation for HCS members was derived in a simple manner, which provides a consistent margin of safety on shear strength for the HCS members up to 500 mm deep. More shear test data would be required to apply the proposed shear strength equation for the HCS members over 500 mm in depth though.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.514-521
• /
• 2004

A routing is the path that an actual train set follows as it moves from one train to another train in a timetable. The number of routings is equivalent to the number of trainsets required to cover the timetable. The primary factors of rolling stock requirement plan include evaluating the minimum number of routings. This can be formulated as a set partitioning problem and solved using enumeration method or column generation method. In this paper we presents an enumeration algorithm which is useful to implement the enumeration method for the rolling stock requirement plan.

• Analytical Science and Technology
• /
• v.37 no.2
• /
• pp.79-86
• /
• 2024

Among the nutrients in feed, amino acids and minerals are important for the growth and development of pets. In particular, interest in nutritional components related to the health of pets is increasing as pet-raising households and pet food markets have recently grown. Therefore, in this study, 55 pet food products distributed in South Korea were purchased, and the content of 3 essential and conditionally essential amino acids (taurine, lysine, arginine) and 4 minerals (Ca, P, Na, K) was investigated. Among the three amino acids, arginine was found to have the highest content, and the average content was 1.79 and 1.37 % in cat and dog foods, respectively. On the other hand, the taurine content was the lowest, but it was found to be higher than the minimum requirement of 0.10 % for cats set by the American Association for Feed Control (AAFCO) and the European Federation of Pet Food Industries (FEDIAF). As a result of the four-component analysis of minerals, the content of Ca was found to be the highest, and the average content was confirmed to be 1.64 and 1.25 % in cat and dog food, respectively. On the other hand, Na was the lowest, but it was higher than the AAFCO minimum requirement and FEDIAF minimum requirement for young cat and dog food. Among all 55 samples examined, the content of the three amino acids and the four inorganic components was confirmed to be suitable for the recommended minimum intake and maximum allowable intake presented by AAFCO and FEDIAF.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.4
• /
• pp.372-378
• /
• 1988

The elimination of offsets such as those induced by load disturbance is a principal requirement in the control of industrial processes. In this paper we propose a self-tuning minimum variance control in the two tuypes of k-incremental and integrating form. Since the objective of control design in this paper is a generalized minimum variance control, it can be applied to nonminimum phase system. And we compare the proposed algorithm wiht that of the positional self-tuning control and show that it can also be applied to nonminimum phase system by computer simulation.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.42 no.4
• /
• pp.59-66
• /
• 2000

This study was carried out to investigated the water requirement of twisted sweet peppers which are cultivated in a green house. The meteorological conditions during the experiment period was close to that of normal year except the temperature and relative humidity. The growth status was improved with the increased saturation ratio. The range of the variation of daily water requirement were very large. The peak consumption occurred in the early August. And the higher saturation ratio resulted in higher water requirement. The total water requirement were about 57.180g/d/plant for pot with 100% (P100) of saturation , about 38.700g/d/plant for pot with 80%(P80) of saturation , about 23,720g/d/plant for pot with 60%(P60) of saturation, and about 53, 390g/d/plant for field cultivation in the green house, respectively. The water requirement was correlated with average ambient temperature and growing status, while no significant correlation were found between water requirement and minimum relative humidity or intensity of solar radiation. And the higher correlation was shown as the saturation ratio was increased. The transpiration coefficients of twisted sweet pepper were 378.0g/g for field cultivation in the green house, 363.3g/g for P100, 338.7g for P80 which was the smallest among pot cultivation , and 472.1g/g for P60 , respectively.