• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1907-1910
• /
• 2003

Miniaturized machine tool can be used to produce 3D features based on CNC and PC-NC technology in the micro/meso scale. Wide applications of CNC technology are developed and there are lots of know-hows in the cutting process and their CNC application. It helps micro/meso scale structure to machine components, which can be used directly for practical applications. In the present research, as the machine tool is miniaturized, the manufacturing machine tools costs less when compared to the equipment used in other micromachining technologies. Moreover, with advancement of micro tool technology, the cutting process can be used to produce micro/meso scale parts. In conclusion, the proposed system can reduce the cost by utilizing the current machining technology, and as a result, complex micro/meso parts can be produced efficiently with high productivity.

• 한국정밀공학회지
• /
• 제30권12호
• /
• pp.1281-1286
• /
• 2013

In this paper, a miniaturized stage with two prismatic-prismatic joints (2-PP) type parallel compliant mechanism driven by piezo actuators is proposed. This stage consists of two layers which are a motion guide layer and an actuation layer. The motion guide layer has 2-PP type parallel compliant mechanism to guide two translational motions, whereas the actuation layer has two leverage type amplification mechanisms and two piezo actuators to generate forces. Since the volume of the stage is too small to mount displacement sensors, the piezo actuators embedding strain gauge sensors are chosen. With the strain gauge-embedded piezo actuators, a semi-control is implemented, which results in hysteresis compensation of the stage. As the results, the operating range of $30{\mu}m$, the resolution of 20 nm, and the bandwidth of 400 Hz in each axis were obtained in the experiments.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.125-126
• /
• 2013

• 한국항해항만학회지
• /
• 제35권4호
• /
• pp.299-302
• /
• 2011

In this letter, the effect of quality factor on center frequency deviation in miniaturized coupled line bandpass filter (BPF) with diagonally end-shorted at their opposite sides and lumped capacitors is theoretically analyzed. The miniaturized BPF of a two-stage structure with two types of quality factors in standard CMOS process was designed and manufactured at 5.5 GHz. The die area of BPF was $1.44{\times}0.41\;mm^2$. The measured center frequency of BPF with a quality factor of 4.9 was deviated from 5.5 GHz to 4.7 GHz. The one with 14.8 was shifted to 5GHz. The theoretical and measured results validate that quality factor influences the center frequency shift of BPF.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.783-784
• /
• 2009

• KSBB Journal
• /
• 제22권5호
• /
• pp.297-304
• /
• 2007

Lovastatin은 근사형성 균류인 Aspergillus terreus가 생합성하는 이차대사산물로 강력한 고지혈증 치료제로 널리 이용되는 물질이다. 본 연구에서는 lovastatin 고생산변이주를 이용하여 포자배지 최적화를 통한 miniature 배양 방법을 확립하고자 하였다. 우선 miniature 배양에 필수적인 효과적인 포자 형성 방법을 개발하고자 포자 형성 배지의 통계학적 배지 최적화를 수행하였다. Miniature 배양의 inoculum으로 이용되는 대량의 포자를 획득하기 위해 Plackett-Burman 실험법을 이용하여 포자 형성을 향상시키는 성분을 조사한 결과, glucose, sucrose, yeast extract 그리고 $KH_2PO_4$가 주목할 만한 효과를 보였다. 상기 성분의 최적 농도를 확인하기 위해 반응표면분석법 (RSM)을 이용한 결과, PDA 포자 형성 배지와 비교하여 볼 때, 최적 성분 농도에서 포자 형성이 약 190배 증가하였다. 최적화된 포자형성 배지를 이용하여 lovastatin 고생산성 변이주의 대량 선별을 위한 miniature 배양 방법을 확립하기 위해 기존의 실험 과정에 'PaB (adaptation)'라는 한 번의 계대배양을 더 추가한 결과 생산균주의 안정성과 재현성이 큰 폭으로 증가하는 주목할 만한 결과를 얻을 수 있었다. 단기간에 가능한 한 다량의 균주를 스크리닝하기 위해 성장배양과 생산배양 모두 조업부피가 7 ml인 tube를 이용해 miniature 배양을 반복 수행하여, lovastatin 생산성과 배양형태가 훌륭한 변이주를 선별할 수 있었는데, 이 균주는 7 ml tube배양과 250 ml flask배양 (조업부피 50 ml) 모두에서 생산성이 높은 것으로 보아 산소 의존도가 비교적 낮고 생산 안정성이 높은 균주인 것으로 판단되었다. 한편 miniature 배양을 이용해서 lovastatin 고생산성을 보이는 균주를 신속 선별하기 위해서는 균주의 적절한 배양형태 유도가 매우 중요한 것으로 관찰되었다. 즉 생산배양으로의 고활성 균주의 접종을 위해서, 또한 생산배양에서 pellet의 배양형태 유도를 위해서 성장배양 시에는 반드시 고농도의 균사모양을, 생산배양 시에는 직경 1 mm 이하의 pellet모양의 배양 형태를 유지해야만, 생산균주가 lovastatin을 안정적으로 고생산할 수 있는 것으로 관찰되었다. 초기에 선별된 균주를 이용하여 miniature 배양에 의해 고속 균주선별 실험을 반복함으로써 고생산성 균주들을 다량 선별할 수 있었는데, 이들의 lovastatin 생산성을 조사한 결과, 기존의 flask 배양대비 오차범위가 $\pm$20% 이내의 생산성을 보이는 균주가 초기 선별시의 32%에 비해 81%로 크게 증가함을 확인할 수 있었다. 이와 같은 결과는 lovastatin 고생산성, 고안정성 균주의 고속 스크리닝을 위해서 본 연구에서 개발한 tube를 이용한 miniature 배양이 기존의 flask 배양을 대체할 수 있는 훌륭한 배양방법임을 제시해 준다.

• 한국항해항만학회지
• /
• 제31권9호
• /
• pp.759-762
• /
• 2007

A novel miniaturized CMOS C-Band bandpass filter based on diagonally end-shorted coupled lines and interdigital capacitors is proposed. The utilized coupled lines structure reduced the configuration in size, as small as a few degrees. Moreover, the characteristic of interdigital capacitor, relatively high Q and good capacitance tolerance, accounts for the satisfied performance of this new filter. A two-stage bandpass filter was designed and fabricated with chip surface area only $1.02{\times}1.4\;mm^2$.

• 한국생산제조학회지
• /
• 제22권4호
• /
• pp.761-766
• /
• 2013

A precision linear motion table plays a crucial role in manufacturing systems used in various industries such as machine tools, semiconductors, and nanofabrication. In particular, one of the most typical mechanisms for a linear motion table is to use a ballscrew and LM guides. However, this mechanism is inevitably influenced by friction because of the relative motion in its joint regions. One of the most complex phenomena in friction is the hysteresis behavior of dynamic friction, which was compared with the steady dynamic friction that was presented using a Stribeck curve in this study. Therefore, we investigated the dynamic friction and its hysteresis behavior using a miniaturized linear table equipped with a ballscrew and LM guides that were lubricated with grease. Subsequently, it could be seen that hysteresis could be considered a time delay after zero-velocity crossing and that it was influenced by acceleration.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.357-360
• /
• 2002

Nowadays, the improvement and development of Multi-media, information and communication technology are rapidly processed. And many products, for example, digital camera, digital camcorder, and PDA, are used for them. They need large data storage capacity and small size, light storage system. Due to that, many studies and researches in data storage system have been carried out. Especially, micro drive system was presented by IBM.(1) However, its system is expensive and uneasy to be portable. In ODD technologies, 1 inch drive system is not yet or in processing status.(2) If to be possible and to be come up, it is cheap than HDD system and easy to transfer information. In this paper, a miniaturized actuator(about linch) is designed and tested for ODD system. Specially, it is adapted for NFR(Near-field Recoding) system using SIL(Solid Immersion Lens). It is the dual-servo actuator which consists of a coarse actuator and fine actuator. Its actuating force generation method is VCM(Voice Ceil Motor). The fine actuator has 4-wire suspensions and bobbin wrapped by coil and includes focusing motion as well as tracking motion. The coarse actuator has an actuating coil and V-grooved guide mechanism. Also, the characteristics of the designed actuator is estimated by sine-swept mode and LDV(Laser Doppler Vibro-meter).

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.377-382
• /
• 2005

This paper describes the design of micro machine tools system for mechanical machining of micro/meso scale mechanical parts. The micro machining systems such as $\mu-Late$, $\mu-milling/drilling$ machine and $\mu-grinding$ machine are the basic elements constructing $\mu-factory$ which gains more attention recently because of increasing needs of mico and nano-parts in various industrial and medical area. A miniaturized 3-axis milling machine with VCM stage and air spindle and palm-top size micro-late are designed, and air bearing stage and stepwise linear motion system with PZT are studied for motion system. The micro cutting characteristics are investigated experimentally, and reconfigurable machine structures are also considered.