• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.3
• /
• pp.439-447
• /
• 2002

The microchannel flow in miniature TCDs (thermal conductivity detectors) is investigated numerically. The solutions based on the boundary layer approximation are not very accurate in the region of the duct inlet for low Reynolds numbers. In this study, two-dimensional Navier-Stokes equations are considered to analyze the gas flow in a miniature TCD. Effects of channel size, inlet and boundary conditions on the heat transfer rate are examined. When the gas stream is not preheated, the distances for a miniature TCD to reach the conduction-dominant region for duct flow are found to be approximately two and three times the thermal entry length for duct flow with constant properties, respectively, leer constant wall temperature and constant wall heat flux boundary conditions. If the gas temperature at the channel inlet is close to the mean gas temperature in the conduction-dominant region, the entrance region is much shorter compared to other cases considered in this study.

• Progress in Medical Physics
• /
• v.23 no.4
• /
• pp.279-284
• /
• 2012

The X ray has been widely used in both diagnosis and treatment. Recently, a miniature X ray tube has been developed for radiotherapy. The miniature X ray tube is directly inserted into the body irradiated, so that X rays can be guided to a target at various incident angles according to collimator geometry and, thus, minimize patient dose. If such features of the miniature X ray tube can be applied to development of X ray imaging as well as radiation treatment, it is expected to open a new chapter in the field of diagnostic X ray. However, the miniature X ray tube requires an added filter and a collimator for diagnostic purpose because it was designed for radiotherapy. Therefore, a collimator and an added filter were manufactured for the miniature X ray tube, and mounted on. In this study, we evaluated beam characteristics of the miniature X ray tube for diagnostic X ray system and accuracy of measuring the HVL. We used the Si PIN Photodiode type Piranha detector (Piranha, RTI, Sweden) and estimated the HVL of the miniature X ray tube with added filter and without added filter. Through an another measurement using Al filter, we evaluated the accuracy of the HVL obtained from a direct measurement using the automatic HVL calculation function provided by the Piranha detector. As a result, the HVL of the miniature X ray tube was increased around 1.9 times with the added filter mounted on. So we demonstrated that the HVL was suitable for diagnostic X ray system. In the case that the added filter was not mounted on, the HVL obtained from use of the automatic HVL calculation function provided by Piranha detector was 50% higher than the HVL estimated using Al filter. Therefore, the HVL automatic measurement from the Piranha detector cannot be used for the HVL calculation. However, when the added filter was mounted on, the HVL automatic measurement value using the Piranha detector was approximately 15% lower than the estimated value using Al filter. It implies that the HVL automatic measurement can be used to estimate the HVL of the miniature X ray tube with the added filter mounted on without a more complicated measurement method using Al filter. It is expected that the automatic HVL measurement provided by the Piranha detector enables to make kV-X ray characterization easier.

• Journal of the Korean Society of Radiology
• /
• v.6 no.1
• /
• pp.39-45
• /
• 2012

Conventional periphery radiography system has a various problem such as patient dose and the pain of X-ray examination. In this paper, to solve these problems, we suggested insertional miniature x-ray system and we verified the feasibility of this system. First, we performed the Geant4 x-ray simulation to design x-ray collimator and filter to use miniature x-ray tube and we decided optimized thickness of filter and collimator. Also, we measured x-ray spectrum using CdTe detector and PX4 module to verify simulation results. Also, we acquired teeth image of fabricated phantom using conventional dental x-ray and prosed miniature x-ray system. As a results, our system has good image quality as compared to those of conventional systems. Our evaluation of the proposed system indicates that it can be potentially very useful for dental imaging.

• Transactions of Materials Processing
• /
• v.19 no.5
• /
• pp.283-289
• /
• 2010

Extrusion process in the bulk material for fabrication of miniature helical gears has problems such as a high forming load and short tool life because the cross-section is complex and asymmetry. To overcome these problems, in this study, miniature helical gears were fabricated by Zn-22Al powder hot extrusion. The included die angle for minimum extrusion load and improving die filling was determined by FE-simulation. The Zn-22Al spheroidal powder produced by gasatomization were compacted and sintered for extrusion experiment. The dimension of helical-gear is 0.3mm in module, 3.35mm in pitch diameter, $15^{\circ}$ in helix angle and the number of teeth is 12. All of the extrusion experiments were performed with internal helical gear die which was machined by precision electric discharge machining using the electrode. The experiment was conducted at $190^{\circ}C$ to $310^{\circ}C$ to obtain extrusive and mechanical properties. The extruded helical gears were analyzed through extrusion load, Vickers hardness and SEM images for each extrusion temperature. The powder hot extrusion process was successfully applied to fabricate a miniature helical gear.

• Journal of Animal Science and Technology
• /
• v.62 no.3
• /
• pp.348-355
• /
• 2020

Cyclophosphamide, a cytotoxic anticancer agent, induces immunosuppression and has several adverse effects. N-acetylcysteine alleviates oxidative stress, liver injury, and intestinal tissue damage. The present study examined whether N-acetylcysteine modulates the adverse effects of cyclophosphamide in pigs. Miniature pigs (n = 15) were used as an experimental model to evaluate the effects of N-acetylcysteine treatment on immune reactions, liver injury, and oxidative stress after cyclophosphamide challenge. Corn-soybean meal based dietary treatments were as follows: control diet with either saline injection, cyclophosphamide injection, or 0.5% N-acetylcysteine and cyclophosphamide injection. N-acetylcysteine increased the number of immune cells and decreased TNF-α production after cyclophosphamide injection and decreased TNF-α, IFN-γ, NF-κB, and IL-8 expression and increased IL-10 expression in peripheral blood mononuclear cells. Serum levels of alanine transaminase and aspartate aminotransferase decreased, superoxide dismutase activity increased, and malondialdehyde activity decreased following N-acetylcysteine treatment after cyclophosphamide injection. N-acetylcysteine decreases immunosuppression, liver injury, and oxidative stress in cyclophosphamide-challenged miniature pigs. The present study suggests that N-acetylcysteine has therapeutic application in livestock for modulating immune reactions, liver injury, and oxidative stress.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.4
• /
• pp.343-349
• /
• 2007

This cryogenic miniature globe valve is used to transfer the liquified natural gas which temperature is $-169^{\circ}C$, supplied pressure is 30bar(3.0MPa). In the present work the temperature distribution and thermal deformation is calculated numerical the FE method is useful to predict the thermal matter of cryogenic miniature globe valve. For this reason, to optimum design of the cryogenic miniature globe valve the analysis of the parameter about bonnet has been studied. It's used 3-D modeling to analyze cryogenic globe valve, which is 1/2". Numerical study used 3-D modeling makes a decision of efficient process of product before producing in the factory. A commercial software(ANSYS 10.0) is used in the structural analysis for cryogenic globe valve.

• Journal of Veterinary Clinics
• /
• v.30 no.2
• /
• pp.111-114
• /
• 2013

A 4-year-old spayed female Miniature Pinscher was presented with a 3.5-year history of elevated liver enzymes level. Continuous elevation of liver enzymes was found on repeated blood examinations and the dog was referred for further evaluation. The abdominal ultrasonography revealed that the gallbladder could not be visualized in any plane. The absence of gallbladder was suspected on ultrasonography. Computed tomography (CT) confirmed gallbladder agenesis (GBA). This is the first reported case of diagnosis of GBA in Miniature Pinscher by using CT.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.449-452
• /
• 2009

This paper was designed to fabricate the miniature spur gear with pitch circle of 1.8 by hot extrusion process of mechanically alloyed Zn-22wt%Al powder at various temperature. The mechanical alloying was preformed for ball milled times of 8h, 16h and 32h by the planetary ball milling. Mechanically alloyed powders were compacted cylindrical performs. Extrusions of the miniature spur gear using the alloyed powder were carried out at different extrusion temperatures. The extruded spur gear was sintered for 2h at $350^{\circ}C$ in argon atmosphere. The friction between the die and the powdered billet and the internally different density due to complex product shape cause the internal crack. To overcome the mentioned problems, high dimensional accuracy at cross section of the spur gear and uniform Vickers hardness could be obtained by graphite lubricant and controlling holding time.

• Animal cells and systems
• /
• v.15 no.4
• /
• pp.310-314
• /
• 2011

The Banna miniature pig (BNMP) is a representative miniature pig breed in China. Even though BNMP dwarfism is obvious, its underlying causative mutations remain unknown. In this study, the BNMP and Large White pig (LWP) serum growth hormone (GH) and insulin-like growth factor (IGF-1) levels were detected by ELISA and compared. BNMP serum IGF-1 levels were significantly lower than LWP levels (P<0.05). The miniature condition may arise from mutations in the GH and GH receptor (GHR) genes. Therefore, GH and GHR cDNA from the BNMP were cloned into a pMD18-T vector by RT-PCR using the total RNA obtained from the BNMP's pituitary and liver tissues. Sequencing results indicated that the open reading frame of the BNMP GH gene is composed of a 26-residue signal peptide and a 191-residue mature peptide. The coding sequence of the BNMP GHR gene contained 639 amino acids, including a signal peptide that is 18 amino acids long. Two amino acid substitutions, A09V and R22Q, were found in the signal peptide of the GH gene. Additionally, the S104P mutation was found in the BNMP's mature GH protein. Four mutations in the cytoplasmic domain of GHR may influence the downstream signal transduction of GHR, which needs further experimental evidence.

• Journal of Life Science
• /
• v.18 no.8
• /
• pp.1169-1172
• /
• 2008

The purpose of this study was to establish blood reference values for miniature pigs from various growth ages before pre-puberty. 12 miniature pigs from two swine farms were sampled by jugular venipuncture. Routine hematological and biochemical determinations were performed using whole blood and serum. For the variables examined in each age group the means and the standard deviations were calculated. In hematological values, there are significant changes (p<0.05) in RBC, hematocrit and platelet values in each group. In RBC and hematocrit values, 4-week group shows the lowest level, whereas in platelet values, 4-week group shows the highest level. In biochemical values, there are significant chnges (p<0.05) in glucose and GGT in each group, and in other biochemical values there are no significant changes during growing periods. The values presented here may be useful for knowing the normal values for miniature pigs and also screening the normal pigs in the early days of their life and during the developemental stages.