• 한국광물학회지
• /
• 제1권1호
• /
• pp.63-69
• /
• 1988

Chondrodite form the Wondong mine, Korea, which is the first occurrence from the southern Korea, has been studied for its mineralogical characterization. It occurs in close association with penninite, phlogopite, diopside and garnet within the magnetite ore bodies, which are debeloped along the contact of the Hwajeol Formation and rhyolite. Two kinds of chondrodites are recognized by their different optical properties; the high birefringent untwinned one and the low birefringent twinned one. The former has slightly higher Mn content than the latter. Twinning in chondrodite has been formed in close relation to substitution Mg (Fe, Mn) in the humite solid solution, as evidenced by the chemical variation across the twin lamallae.

• Advances in concrete construction
• /
• 제13권6호
• /
• pp.411-422
• /
• 2022

Aggregates mineralogical, and petrographic properties directly affect the mechanical properties of the produced high strength. This study is focused on the effects of magmatic, sedimentary, and metamorphic aggregates on the performance of high strength concrete. In this study, the effect of the mineralogical properties of aggregates on the compressive strength and modulus of elasticity of high-strength concrete was estimated by Artifical Neural Network (ANN). To estimate the compressive strength and elasticity modules, 96 test specimens were produced. After 28 days under suitable conditions, tests were carried out to determine the compressive strength and modulus of elasticity of the test specimens. This study also focused on the application of artificial neural networks (ANN) to predict the 28-day compressive strength and the modulus of elasticity of high-strength concrete. An ANN model is developed, trained, and tested by using the available test data obtained from the experimental studies. The ANN model is found to predict the modulus of elasticity, and 28 days compressive strength of high strength concrete well, within the ranges of the input parameters. These comparisons show that ANNs have a strong potential to predict the compressive strength and modulus of elasticity of high-strength concrete over the range of input parameters considered.

• 한국광물학회:학술대회논문집
• /
• 한국광물학회.한국암석학회 2004년도 공동학술발표회 논문집
• /
• pp.67-69
• /
• 2004

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.567-574
• /
• 2000

The purpose of this study is to examine mineralogical properties of the soft clay that is distributed widely in Samsan area, Ulsan. XRD analysis were examined to find the quantities of the clay minerals. And XRF, SEM and EDX analysis were also examined to investigate the chemical compositions and the structures of the clay. The properties of the samples from 2 sites in Samsan area were that the minerals of the clay were illite, kaolinite, chlorite, smectite and etc.. The plenty of illite has 38 to 53% of content in whole study area. And kaolinite had 18 to 30%, chlorite had 15 to 25%, and smectite had 4 to 12% of content, respectively. The results of SEM observation showed that appearances of Ulsan clay were sheet, plannar or needle form. Ulsan clay included the salt crystal of cubic and the foraminifera, which were related with the content of organ.

• 한국광물학회지
• /
• 제19권2호
• /
• pp.111-121
• /
• 2006

금속 조합을 이용하여 배관내벽에 형성된 스케일의 제거 및 억제 가능성과 광물학적 특성을 연구하기 위하여 주사전자현미경, 방안실체현미경, 선회절분석, 스케일 제거실험을 실시하였다. 배관내벽에 생성된 스케일은 대부분 철광물로 구성되어있으며 약간의 Si와 Ca 광물을 포함하고 있다. 배관내벽의 스케일을 제거하는 데 내부 금속을 Mg, 외부금속을 황동으로 실험하였을 때 가장 좋은 효과를 나타낸다.

• 한국광물학회지
• /
• 제9권2호
• /
• pp.93-101
• /
• 1996

Behavior of platinum group elements during crystallization within ore magma is of interest. In this study platinum is selected and its mineralogical and geochemical behavior in the presence of antimony and tellurium is investigated at 600$^{\circ}C$. High purity Pt, Sb, and Te are used as starting material and silica quartz tubings are as container. Rection products have been examined by use of ore microscope, X-ray diffractometer, electron microprobe analyser and micro-indentation hardness tester. stable phases at 600$^{\circ}C$ are platinum (Pt), Pt5Sb, Pt3Sb, PtSb, stumpflite (PtSb), geversite (PtSb), PtTe, Pt3Te4, Pt2Te3, moncheite (PtTe2), tellurantimony (Sb2Te3), and antimony (Sb). Geversite is the mineral showing the most significant extent of solid solution by up to 27 at% between Sb and Te elements. Isothermal section of 600$^{\circ}C$ is established in this study. It is noted that platinum cannot coexists with stumpflite or geversite under equilibrium condition, and stumpflite composition in equilibrium with geversite may be used as geothermometer.

• 한국광물학회지
• /
• 제10권2호
• /
• pp.75-81
• /
• 1997

High pressure X-ray diffraction study was carried out on a natural FeO(OH)-goethite to investigate its compressibility at room temperature. Energy dispersive X-ray diffraction method was employed using Mao-Bell type diamond anvil cell with Synchrotron Radiation. MgO powder was compressed together with goethite for the high pressure determinations. Bulk modullus was determined to be 147.9 GPa by the Birch-Murnaghan equation of state under assumption of K0' of 4. This value was subjected to compare with its structural analogs and related materials.

• 자원환경지질
• /
• 제44권3호
• /
• pp.203-215
• /
• 2011

오염된 토양의 정화방법을 선정은 토양의 지화학적 및 광물학적 특성에 근거하여 선정되어야 오염된 토양을 적절하게 정화할 수 있다. 따라서 이 연구는 비소로 오염된 토양의 적절한 정하방법 선정을 위하여 비소의 존재형태를 알아보기 위하여 토양의 지화학적 및 광물학적 특성을 연구하였다. 이 연구를 위하여 전남 광양지역의 초남 금 광산의 비소로 오염된 토양을 이용하였다. 비소오염 토양의 지화학적 및 광물학적 특성을 알아보기 위하여 입도분리, 연속추출, 그리고 광물학적 분석을 실시하였다. 입도분석 결과에 따르면 비소오염토양의 무게백분율은 모래가 17-36%, 미사가 25-54%, 점토가 9-28%이며, 토성은 사양토(sandy loam), 양토(loam), 미사질 양토 (silt loam)로 나타났다. 토양의 pH는 폐 금광산 갱구 앞 토양이 4.5-6.6.으로 강산성내지 약산성을 띠었다. 비소오염 토양의 각 입도에 비소분포는 모래에 9-81%, 미사에 9-67%, 점토에 7-28% 분포하고 있었다. 연속추출 실험 결과, 비소는 철 산화물을 추출했을 때 1-75%로 검출되었으며, 추출 후 잔여물에 12-91% 잔존하고 있었다. 모래와 미사의 주 구성광물은 고령석, 사장석, 석영, 운모로 나타났으며, 부 구성광물은 철 산화물이다. 점토의 주 구성광물은 고령석, 석영, 운모, 질석이며, 부 구성광물은 철 산화물과 금홍석 은이다. 또한 점토 내 철 산화물과 운모에서 비소가 발견되었다. 이러한 결과는 비소가 철 산화물 또는 점토 광물 등에 흡착 또는 공침하여 존재하는 것으로 사료된다. 이는 비소로 오염된 토양의 지화학적 특성과 광물학적 특성을 통해 오염된 토양을 정화하는데 정보를 제공할 수 있을 것으로 사료된다.

• 한국광물학회지
• /
• 제1권1호
• /
• pp.48-62
• /
• 1988

The high aluminous meta-claystones are thinly bedded to metasedimentary rocks which belong to Chununsan Formation. Major high aluminous minerals in the ores ae andalusite, kaolinite and pyrophyllite. The other significant constituents are sericite, chloritoid and carbonaceous material, etc. Ores can be classified into 4 types according to mineral compositions; andalusite- kolinite-sericite, andalusite-kaolinite-chloritoid, kaolinite-sericite-pyrophyllite, and kaolinite-chloritoid-sericite ore. The formation of ore minerals are resulted from sedimentary, diagenetic, metamorphic and hydrothermal processes. Andalusite are formed by low-grade metamorphism under the conditions of $400~500^{\circ}C$ and below 4kb, from the view-point of mineral stability field, illite-mica crystallinity and graphitization degree of the carbonaceous material. Andalusites are partly altered to kaolinite, forming major mineral phase in the ores.

• 한국광물학회지
• /
• 제11권2호
• /
• pp.69-84
• /
• 1998

The Daehyun sericite deposit in socheon-myun, Bongwha-gun, Kyungsangbuk-do, Korea, has been formed by the hydrothermal alteration of the Hongjesa granite of Precambrian age, leaving the muscovite granite between ore body and the Hongjesa granite as the wall rock alteration zone. The process of sericitization of granitic rock as well as chemistry and structures of sericites were studied using polarizing microscope, X-ray diffractometer (XRD), electron probe microanalyzer (EPMA) and high resolution transmission electron microscope (HRTEM). There are two genetic types of sericites having different chemistry and structure. The early sericite is of 2M1 polytype and has octahedral composition close to muscovite. It has been formed from the primary muscovite, tourmaline and quartz under a relatively high temperature. The late sericite is of 1M, 2M1 and 3T polytypes and has phengitic composition. It has been formed form feldspar, biotite, muscovite and tourmaline under a relatively low temperature. Chemical analyses show t, the early sericite has less Mg+FeT content and lower Si/AlIV ratio in tetrahedral site than the late sericite.