• Advances in concrete construction
• /
• 제5권3호
• /
• pp.183-199
• /
• 2017

This paper reports an experimental study into the rheological behaviour of Smart Dynamic Concrete (SDC). The investigation is aimed at quantifying the effect of the varying amount of mineral admixtures on the rheology, setting time and compressive strength of SDC containing natural sand and crushed sand. Ordinary Portland cement (OPC) in conjunction with the mineral admixtures was used in different replacement ratio keeping the mix paste volume (35%) and water binder ratio (0.4) constant at controlled laboratory atmospheric temperature ($33^{\circ}C$ to $35^{\circ}C$). The results show that the properties and amount of fine aggregate have a strong influence on the admixture demand for similar initial workability, i.e., flow. The large amounts of fines and lower value of fineness modulus (FM) of natural sand primarily increases the yield stress of the SDC. The mineral admixtures at various replacement ratios strongly contribute to the yield stress and plastic viscosity of SDC due to inter particle friction and cohesion.

• Computers and Concrete
• /
• 제7권1호
• /
• pp.17-38
• /
• 2010

This research aimed to investigate the influence of high-volume mineral admixtures (MAs), i.e., fly ash and slag, on the hydration characteristics and microstructures of cement pastes. Degree of cement hydration was quantified by the loss-on-ignition technique and degree of pozzolanic reaction was determined by a selective dissolution method. The influence of MAs on the pore structure of paste was measured by mercury intrusion porosimetry. The results showed that the hydration properties of the blended pastes were a function of water to binder ratio, cement replacement level by MAs, and curing age. Pastes containing fly ash exhibited strongly reduced early strength, especially for mix with 45% fly ash. Moreover, at a similar cement replacement level, slag incorporated cement paste showed higher degrees of cement hydration and pozzolanic reaction than that of fly ash incorporated cement paste. Thus, the present study demonstrates that high substitution rates of slag for cement result in better effects on the short- and long-term hydration properties of cement pastes.

• 콘크리트학회논문집
• /
• 제19권6호
• /
• pp.701-706
• /
• 2007

본 연구는 장기간 숏크리트의 강도를 유지할 수 있는 영구지보재로서 알칼리 프리계 및 시멘트 광물계 급결제를 사용한 적정 배합비의 고성능 숏크리트의 내구성을 평가하였다. 내구성 실험은 염소이온 투과 시험, 동결융해 반복 시험, 촉진 중성화 시험 및 숏크리트에 염해의 영향 실험을 실시하였다. 실험 결과 실리카퓸을 사용한 모든 배합이 낮은 투과성을 나타내었다. 실험 결과 실리카퓸을 사용한 모든 배합이 모두 낮은 투과성을 나타내었다. 또한 동결융해 300회 반복 후에 상대동탄성계수가 85% 이상을 초과하는 우수한 동결융해 저항성을 보였다. 촉진 중성화 시험 결과 급결제에 따른 영향은 나타나지 않았으며 실리카퓸을 사용한 배합에서 중성화 깊이가 약간 깊게 나타났다. 염해 환경에서는 어떠한 영향도 없었다. 따라서 본 연구에서의 고성능 숏크리트 배합은 우수한 내구 성능을 보여주었다.

• Structural Engineering and Mechanics
• /
• 제51권1호
• /
• pp.1-13
• /
• 2014

This paper reports an experimental study into the rheological behaviour of self consolidating concrete (SCC). The investigation aimed at quantifying the impact of the varying amounts of mineral admixtures on the rheology of SCC containing natural sand. Apart from the ordinary Portland cement (OPC), the cementitious materials such as fly ash (FA), ground granulated blast furnace slag (GGBS) and micro-silica (MS) in conjunction with the mineral admixtures were used in different percentages keeping the mix paste volume and flow of concrete constant at higher atmospheric tempterature ($30^{\circ}$ to $40^{\circ}C$). The rheological properties of SCC were investigated using an ICAR rheometer with a four-blade vane. The rheological properties of self-consolidating concrete (SCC) containing different mineral admixtures (MA) were investigated using an ICAR rheometer. The mineral admixtures were fly ash (FA), ground granulated blast furnace slag (GGBS), and micro silica (MS). The results obtained using traditional workability results are compared with those obtained using ICAR rheometer. The instrument ICAR (International Center for Aggregate Research) rheometer employed in the present study for evaluating the rhelogical behaviour of the SCC is found to detect systematic changes in workability, cementitious materials, successfully. It can be concluded that the rheology and the slump flow tests can be concurrently used for predicting the flow behaviours of SCC made with different cementitious materials.

• 한국건축시공학회지
• /
• 제13권3호
• /
• pp.282-290
• /
• 2013

본 연구는 혼화재의 다량 치환 시 배합 요인의 조정 범위를 검토하기 위한 목적으로 일반 콘크리트에서 혼화재 다량 치환 콘크리트로의 배합변경 데이터를 확보하고자 하였다. 실험결과를 요약하면, 일반 범용적 배합내에서 혼화재 다량 치환 콘크리트로 배합을 변경 시 적정 품질을 확보하기 위한 단위수량의 경우 $20{\sim}30kg/m^3$ 하향 조정, 잔골재율은 W/B 5 % 하향조정 시 약 1 %, 총 치환율 5 % 증가 시약 0.12 %로 중복 하향 조정, AE제는 FA 치환율 5 % 증가 시 컨벤셔널 대비 약 20~30 % 정도 상향 조정, W/B는 FA 및 BS의 치환율이 5 % 상향 시 W/B를 약 1~4 % 정도 하향 조정함으로써 콘크리트의 기본 물성을 확보할 수 있는 것으로 나타났다.

• International Journal of Concrete Structures and Materials
• /
• 제7권3호
• /
• pp.239-249
• /
• 2013

In the present scenario to fulfill the demands of sustainable construction, concrete made with multi-blended cement system of OPC and different mineral admixtures, is the judicious choice for the construction industry. Silica fume (SF) and fly ash (FA) are the most commonly used mineral admixtures in ternary blend cement systems. Synergy between the contributions of both on the mechanical properties of the concrete is an important factor. This study reports the effect of replacement of OPC by fly ash (20, 30, 40 and 50 % replacement of OPC) and/or silica fume (7 and 10 %) on the mechanical properties of concrete like compressive strength and split tensile strength, with three different w/b ratio of 0.3, 0.4 and 0.45. The results indicate that, as the total replacement level of OPC in concrete using ternary blend of OPC + FA + SF increases, the strength with respect to control mix increases up to certain replacement level and thereafter decreases. If the cement content of control mixes at each w/b ratio is kept constant, then as w/b ratio decreases, higher percentage of OPC can be replaced with FA + SF to get 28 days strength comparable to the control mix. A new method was proposed to find the efficiency factor of SF and FA individually in ternary blend cement system, based on principle of modified Bolomey's equation for predicting compressive strength of concrete using binary blend cement system. Efficiency factor for SF and FA were always higher in ternary blend cement system than their respective binary blend cement system. Split tensile strength of concrete using binary and ternary cement system were higher than OPC for a given compressive strength level.

• 한국세라믹학회지
• /
• 제44권9호
• /
• pp.483-488
• /
• 2007

The influence of $P_2O_5$ on clinker mineral composition and the cement quality was investigated. When the sewage sludge was used as a raw material in place of clay, the presence of $P_2O_5$ in sewage sludge affects the mineral composition and the clinker quality. As the $P_2O_5$ concentration in raw mix increases, the burnability of clinker becomes worse and the alite decomposes into belite and free-CaO, so belite increases with the decrease of alite. The early strength of mortar decreases with the increase of $P_2O_5$ concentration. On the other hand, later-age strength increases with the increase of belite content. The setting time of cement was delayed with the $P_2O_5$ concentration above 0.6 wt%.

• 자원리싸이클링
• /
• 제22권3호
• /
• pp.18-27
• /
• 2013

본 연구에서는 광산 스프레이 콘크리트에 대한 연구개발의 일환으로 산업부산물을 구조재료인 시멘트에 혼입하여 산업부산물의 재활용 극대화 방안을 제시하였다. 또한 이를 통해 안정성과 경제성을 모두 만족할 수 있는 친환경적인 광산 스프레이 콘크리트의 배합비를 도출하고 평가하였다. 연구 결과 광물성 혼화재를 사용한 콘크리트 강도는 증가하였으며, 현장시험에서도 양호한 결과가 도출되었다. 그러므로 산업부산물을 이용한 광산 스프레이 콘크리트는 향후 현장적용이 가능할 것으로 판단되었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권6호
• /
• pp.791-794
• /
• 2000

Two hundred sixteen crossbred ($Landrace{\times}Yorkshire$) castrates with an average weight of $7.4{\pm}0.3kg$ were used in a $3{\times}3$ factorial treatment array. The treatments were three levels of Herb mixture (HM; 0, 0.40 and 0.80 g/kg BW/day) and three levels of dietary nutrient (17.30% CP, Level-1; 17.90% CP, Level-2; and 18.50% CP, Level-3). The influence of HM intake and nutrient level on growth performance and ADG in 0.40- and 0.80-HM pigs increased significantly (p<0.01) as nutritional level was elevated. Although very little enhancement of ADG was observed at Level-1, peak ADG occurred in 0.8-HM treated pigs at Level-3. Feeding of 0.80 g HM/kg/d to pigs consuming Level-1 diet resulted in a 8.7% increase in ADG compared with control pigs, whereas the increase in ADG as a result of 0.80-HM with Level-3 treatment was 39%. ADFI in Level-2 pigs improved linearly (p<0.01) as HM level was increased. Treatment with HM resulted in a 12.0% increase ranging 4.7 to 20% in the ADFI compared with respective controls. ADFI at all nutritional level was significantly higher in 0.80-HM pigs (p<0.02). F/G in Level-2 pigs improved significantly as HM was fed (p<0.01), and in HM-0.80 pigs was also significantly improved as nutritional level was increased (p<0.05). Pigs fed HM had higher bone mineral density (BMD) at Level-1, longer dorsal spine length (DSL) at level-2 (p<0.05) than pigs fed basal diets. Pigs fed HM tended to higher BMD and DSL than those fed basal diets. The level of GH secretion declined with age. There was no difference between treatments (p>0.05) in the serum growth hormone at the same age. The GH was higher in pigs fed HM than those fed basal diets and increased in all pigs after 2wks feeding. A positive effect of added Herb-Mix on growth performance in weaned pigs was demonstrated by measuring the serum growth hormone, bone mineral density and length of dorsal spine.

• 콘크리트학회논문집
• /
• 제26권6호
• /
• pp.679-686
• /
• 2014

본 연구에서는 광물질 혼화재료를 사용한 수중불분리성 콘크리트의 물성을 만족하면서 수중불분리성 혼화제의 사용량을 줄이기 위한 배합적 접근과 수중불분리성 콘크리트의 시험에 있어 실무와 차이가 있는 사항에 대하여 검토를 실시하였는데, 그 결과를 요약하면 다음과 같다. 우선 광물질 혼화재료를 사용하는 수중불분리성 콘크리트의 최적 단위수량 및 수중불분리성 혼화제의 사용량은 190 kg, 0.9%/W인 것으로 나타났으며, 특히 목표강도의 W/B에서 5% 정도로 낮춘 W/B로 배합설계를 통해 단위수량 및 수중불분리성 혼화제 사용량을 줄여 W/B 조절에 따른 재료분리저항성, 압축강도 등의 품질 확보 및 경제성의 확보가 가능할 것으로 판단된다. 또한, 탁도계를 이용한 혼탁물질량의 측정을 위해서는 탁도계 검침부 삽입 후 1분 경과 시점에서 안정적인 값을 나타냈으나, 수중불분리성 콘크리트의 혼탁물질량을 측정하기 위해 실무에서 사용되는 탁도계와 KCI -AD102 표준방법과의 상관성에 대한 부분의 검토가 필요할 것으로 판단된다. 수중 공시체 제작방법에 따른 압축강도의 발현성은 크게 차이가 없는 것으로 나타났다.