• Computers and Concrete
• /
• v.14 no.3
• /
• pp.263-277
• /
• 2014

This study investigated four electric field configurations of two-dimensional accelerate lithium migration technique (ALMT), including line-to-line, plane-to-line, contour-to-line and plane-to-plane, and analyzed the ion migration behavior and efficiency. It was found that the free ion distribution diagram and voltage distribution diagram were similar, and ions migrated in the power line direction. The electrode modules were used for the mortar specimen with w/c ratio of 0.5. The effectively processed areas accounted for 14.1%, 39.0%, 49.4% and 51.4% of total area respectively on Day 28. Larger electrode area was more advantageous to ion migration. In addition, it was proved that the two-dimensional electric field could be divided into different equifield line active regions, and regarded as affected by one-dimensional electric field, and the ion migration results in various equifield line active regions were predicted by using the duration analysis method based on the theoretical model of ion migration obtained from one-dimensional test.

• Current Applied Physics
• /
• v.18 no.11
• /
• pp.1368-1374
• /
• 2018

In this paper, forced vibration was used to regulate the droplet migration, fully recording the transient migration of droplets on a micro-textured substrate under the resonance frequency by a high-speed camera. The influence of resonance frequency and dynamic migration characteristics of droplets on the solid micro-texture surface under lateral vibration were researched. The experiment demonstrates that the driving force is caused by the difference between the left and right contact angles made the droplet oscillate and migrate, and as time t increases, the left and right contact points are periodically shifted and the amplitude of migration increases. Therefore, based on the droplet migration behavior and its force balance mechanism, a spring vibration model of migration behavior of the vibrating droplet micro unit was set up to predict the complete trajectory of its migration on a solid surface. The calculation results show that the theoretical displacement is less than the experimental displacement, and the longer the time, the larger the difference. Affected by the vibration, part of the droplet permeates through the micro-texture, resulting in the droplet losing height and the contact angle becoming smaller as well. While the other part of droplet overcomes the internal surface tension to migrate.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.12
• /
• pp.2426-2430
• /
• 2007

Dissipative particle dynamics simulations of bead-spring dumbbell models under microchannel flow were performed and the effects of the deformation on their migration behavior were discussed. Dumbbells were found to migrate toward the walls or the channel center depending on the stiffness. Stiff dumbbells migrated toward the walls. In any cases, the dumbbells were found to have a stronger tendency to move toward the channel center in more deformable conditions.

• Nuclear Engineering and Technology
• /
• v.54 no.1
• /
• pp.162-176
• /
• 2022

In Lead-based reactor (LBR) severe accident, the meltdown and migration inside the reactor core will lead to fuel fragment concentration, which may further cause re-criticality and even core disintegration. Accurately predicting the migration and solidification behavior of melt in LBR severe accidents is of prime importance for safety analysis of LBR. In this study, the Moving Particle Semi-implicit (MPS) method is validated and used to simulate the migration and solidification behavior. Two main surface tension models are validated and compared. Meanwhile, the MPS method is validated by the L-plate solidification test. Based on the improved MPS method, the migration and solidification behavior of melt in LBR severe accident was studied furthermore. In the Pb-Bi coolant, the melt flows upward due to density difference. The migration and solidification behavior are greatly affected by the surface tension and viscous resistance varying with enthalpy. The whole movement process can be divided into three stages depending on the change in velocity. The heat transfer of core melt is determined jointly by two heat transfer modes: flow heat transfer and solid conductivity. Generally, the research results indicate that the MPS method has unique advantage in studying the migration and solidification behavior in LBR severe accident.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.12 no.2
• /
• pp.91-96
• /
• 2006

The widespread use of packaging materials on food packages sometimes causes off-flavor and deterioration in the food by migration of packaging materials which consist of mainly plastic materials and printing ink solvents. Even though migration of the residual packaging materials does not generally cause safety problems in the contained food, it certainly can generate off-flavor and finally deteriorate quality of the finished product. In highly consumer-oriented markets, quality of the finished product is gaining more importance economically, so profound and thorough study about migration into food to maintain the fine quality of the end product becomes an importance issue. Studies have been conducted about migration of various packaging materials and the chemical reactions between the food components and the materials used for food packaging (Brody, 1989; Mcneal and Breder, 1987; Lawson, G and Lawson, C, 1996). Several of these studies have measured partition coefficient values (Kp) between packaging materials and various food samples and involved finding factors that affected the partitioning behavior of packaging materials into the contained food. However, to enable prediction of partitioning, data are still needed on the relation of packaging material chemical structure and properties to partitioning behavior, and on the partitioning behavior of various food ingredients and the total food compositions.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.3
• /
• pp.345-349
• /
• 2003

The quantity, process and kinetics of di-(2-ethylhexyl)phthalate (DEHP) migration in the 30/70 and 40/60 poly(vinylchloride) (PVC)/DEHP blends were investigated using gas chromatograph. A thin and flexible PVC sheet was soaked in surrounding medium (SM) of water/ethanol mixture and acetonitrile with constant stirring to release DEHP. By observed concentration of DEHP in the SM, it is found that acetonitrile is more intense in DEHP migration than water/ethanol mixture. In addition the amount of extracted DEHP is proportional to the leaching temperature and added ratio of DEHP. The behavior of DEHP migration from flexible PVC sheets was described by the Ficks's law with $2.72-10.1\;{times}\;10^{-10}$ cm²/s of the diffusion coefficients.

• Korea-Australia Rheology Journal
• /
• v.13 no.1
• /
• pp.19-27
• /
• 2001

In this symposium paper, the migration and hydrodynamic diffusion of non-colloidal, spherical particles suspended in polymer solutions are considered under Poiseuille or torsional flows. The migration phenomena in polymer solutions are compared with those in Newtonian fluids and the effect of fluid elasticity is discussed. The experimental results on particle migration in dilute polymer solution reveal that even a slight change in the rheological property of the dispersing medium can induce drastic differences in flow behavior and migration of particles, especially in dilute and semi-concentrated suspensions.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.25 no.2
• /
• pp.47-50
• /
• 2019

Migration behavior of printing ink solvents on three types of chocolates with different fat content and fat compositions (different crystallinity) was investigated. Even though chocolate cream (29%) has lower fat content (29%) than that of chips (48%), it showed higher degree of migration. However, with increasing temperature, degree of migration was depended on mainly fat content. This result indicated that degree of migration was mainly affected by crystallinity at below melting point of chocolate, but the effect was diminshed as the temperature was close to melting temperature.

• Korea journal of population studies
• /
• v.12 no.1
• /
• pp.30-42
• /
• 1989

This study develops a model of migration decision-making process, with identifying macrolevel and microlevel factors affecting the process. The model includes some sequential stages : to be dissatisfied with current residential area, intend to move, collect information about alternative destinations, select destination, decide to move, and make actual migration. The macrolevel factors included in the model are environmental, socioeconomic, cultural, and demographic characteristics of the current residence and alternative destinations. The microlevel factors are psychological, socioeconomic, and demographic characteristics of the individual. The effects of the macrolevel and microlevel factors on each stage of migration decision-making process are identified from the previous studies on migration. This study has both theoretical and practical implications. The theoretical contribution will be in the area of integrating the ecological and the individual level perspectives of migration by identifying the macrolevel and microlevel effects on migration decision-making process. This study also has implications for theoretical frameworks guiding empirical analysis of migration behavior of the individuals, and for policies aimed at redistributing population.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.960-964
• /
• 2004

During system resource improvement process that based on Object-Oriented technology could be affect to the continuous system performance if lack appropriate management and control objects mechanism. This paper proposes a methodology to support continuous system performance and its stability. The adoption is based on Java Container Framework and Collections Framework for object collection. Also includes Software Engineering, Object Migration and Multiple Class Loaders mechanism accommodate to construct Continuous Migration Container (CMC). CMC is a runtime environment provides interfaces for management and control to support upgrading object process. Upgrade object methodology of CMC can be divided into two phase are object equivalence checking and object migration process. Object equivalence checking include object behavior verification and functional conformance verification before object migration process. In addition, CMC use Multiple Class Loaders mechanism to support reload effected classes instead of state transfer in migration process while upgrading object. These operations are crucial for system stability and enhancement efficiency.