• 대한토목학회논문집
• /
• 제34권1호
• /
• pp.167-173
• /
• 2014

석션 매입 앵커(Embedded Suction Anchor; ESA)는 석션 기초(Suction Pile or Caisson)을 이용하여 앵커를 지중에 매설한 후 인발에 저항하는 계류앵커형식이다. 본 연구에서는 ALE (Arbitrary Larangan Eulerian) Adpative Meshing 기법을 이용한 수치해석을 통해 석션 매입 앵커의 인발 거동을 모사하고, 그 결과를 기존 연구에서 수행된 원심모형 실험 및 한계 평형법을 이용한 해석적 방법의 결과와 비교 분석 하였다. 이를 통해 앵커의 수평 연직 경사 방향의 인발 거동을 평가하였으며, 수치 해석 결과, 수평 재하 시 중간 위치에서 가장 큰 저항력을 발휘하는 것으로 나타났다. 연직 재하의 경우 재하 위치와 무관하게 유사한 저항력이 발휘 되었으며, 수평 저항력이 가장 큰 중간 위치에서 경사 하중을 가한 결과 경사각이 증가할수록 인발 저항력이 감소하는 것으로 나타났다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1041-1041
• /
• 2001

Removal of variability in spectra data before the application of chemometric modeling will generally result in simpler (and presumably more robust) models. Particularly for sparsely sampled data, such as typically encountered in diode array instruments, the use of Savitzky-Golay (S-G) derivatives offers an effective method to remove effects of shifting baselines and sloping or curving apparent baselines often observed with scattering samples. The application of these convolution functions is equivalent to fitting a selected polynomial to a number of points in the spectrum, usually 5 to 25 points. The value of the polynomial evaluated at its mid-point, or its derivative, is taken as the (smoothed) spectrum or its derivative at the mid-point of the wavelength window. The process is continued for successive windows along the spectrum. The original paper, published in 1964 [1] presented these convolution functions as integers to be used as multipliers for the spectral values at equal intervals in the window, with a normalization integer to divide the sum of the products, to determine the result for each point. Steinier et al. [2] published corrections to errors in the original presentation [1], and a vector formulation for obtaining the coefficients. The actual selection of the degree of polynomial and number of points in the window determines whether closely situated bands and shoulders are resolved in the derivatives. Furthermore, the actual noise reduction in the derivatives may be estimated from the square root of the sums of the coefficients, divided by the NORM value. A simple technique to evaluate the actual convolution factors employed in the calculation by the software will be presented. It has been found that some software packages do not properly account for the sampling interval of the spectral data (Equation Ⅶ in [1]). While this is not a problem in the construction and implementation of chemometric models, it may be noticed in comparing models at differing spectral resolutions. Also, the effects on parameters of PLS models of choosing various polynomials and numbers of points in the window will be presented.

• 한국전산구조공학회논문집
• /
• 제34권4호
• /
• pp.221-230
• /
• 2021

전역 최적화 문제의 해를 유전 알고리즘을 사용하여 얻어 완전파형역산을 수행하고 층상 반무한체의 물성치를 추정하는 기법을 제안한다. 조화 수직 하중이 작용하는 층상 반무한체의 동적 응답을 측정하고, 이를 추정 물성치를 사용하여 계산된 응답과 비교한다. 응답의 추정치는 mid-point integrated finite element와 perfectly matched discrete layer를 사용하여 구성된 thin-layer model로부터 얻는다. 전역 최적화 문제의 목적 함수는 응답의 관측치와 추정치의 차이에 대한 L2-norm으로 계산된다. 유전 알고리즘을 사용하여 전역 최적화 문제의 해를 구하여 완전파형역산을 수행한다. 제안된 기법을 기본 진동 모드 뿐만이 아니라 고차 진동 모드도 우세한 다양한 층상 반무한 매질에 적용하여, 측정치가 잡음을 포함하지 않는 경우와 포함하는 경우 모두에 대해서 제안된 완전파형역산 기법은 층상 반무한체의 재료 특성을 추정하는데 적합함을 확인할 수 있다.

• 한국항행학회논문지
• /
• 제27권2호
• /
• pp.182-189
• /
• 2023

깊이 추정은 차량, 로봇, 드론의 자율주행을 위한 3차원 지도 생성의 핵심 기술이다. 기존의 센서 기반 깊이 추정 방식은 정확도는 높지만 가격이 비싸고 해상도가 낮다. 반면 카메라 기반 깊이 추정 방식은 해상도가 높고 가격이 저렴하지만 정확도가 낮다. 본 연구에서는 무인항공기 카메라의 깊이 추정 성능 향상을 위해 Self-Attention 기반의 비지도 단안 카메라 영상 깊이 추정을 제안한다. 네트워크에 Self-Attention 연산을 적용하여 전역 특징 추출 성능을 향상시킨다. 또한 카메라 파라미터를 학습하는 네트워크를 추가하여 카메라 칼리브레이션이 안되어있는 이미지 데이터에서도 사용 가능하게 한다. 공간 데이터 생성을 위해 추정된 깊이와 카메라 포즈는 카메라 파라미터를 이용하여 포인트 클라우드로 변환되고, 포인트 클라우드는 Octree 구조의 점유 그리드를 사용하여 3D 맵으로 매핑된다. 제안된 네트워크는 합성 이미지와 Mid-Air 데이터 세트의 깊이 시퀀스를 사용하여 평가된다. 제안하는 네트워크는 이전 연구에 비해 7.69% 더 낮은 오류 값을 보여주었다.

• Journal of Korean Neurosurgical Society
• /
• 제56권1호
• /
• pp.5-10
• /
• 2014

Objective : When the pedicle screw insertion technique is failed or not applicable, C7 intralaminar screw insertion method has been used as an alternative or salvage fixation method recently. However, profound understanding of anatomy is required for safe application of the bilaterally crossing laminar screw at C7 in clinic. In this cadaveric study, we evaluated the anatomic feasibility of the bilateral crossing intralaminar screw insertion and especially focused on determination of proper screw entry point. Methods : The C7 vertebrae from 18 adult specimens were studied. Morphometric measurements of the mid-laminar height, the minimum laminar thickness, the maximal screw length, and spino-laminar angle were performed and cross-sectioned vertically at the screw entry point (spino-laminar junction). The sectioned surface was equally divided into 3 parts and maximal thickness and surface area of the parts were measured. All measurements were obtained bilaterally. Results : The mean mid-laminar height was 13.7 mm, mean minimal laminar thickness was 6.6 mm, mean maximal screw length was 24.6 mm, and mean spinolaminar angle was $50.8{\pm}4.7^{\circ}$. Based on the measured laminar thickness, the feasibility of 3.5 mm diameter intralaminar screw application was 83.3% (30 sides laminae out of total 36) when assuming a tolerance of 1 mm on each side. Cross-sectional measurement results showed that the mean maximal thickness of upper, middle, and lower thirds was 5.0 mm, 7.5 mm, and 7.3 mm, respectively, and mean surface area for each part was $21.2mm^2$, $46.8mm^2$, and $34.7mm^2$, respectively. Fourteen (38.9%) sides of laminae would be feasible for 3.5 mm intralaminar screw insertion when upper thirds of C7 spino-laminar junction is the screw entry point. In case of middle and lower thirds of C7 spino-laminar junction, 32 (88.9%) and 28 (77.8%) sides of laminae were feasible for 3.5 mm screw insertion, respectively. Conclusion : The vertical cross-sectioned area of middle thirds at C7 spinolaminar junction was the largest area and 3.5 mm screw can be accommodated with 77.8 % of feasibility when lower thirds were the screw entry point. Thus, selection of middle and lower thirds for each side of screw entry point in spino-laminar junction would be the safest way to place bilateral crossing laminar screw within the entire lamina. This anatomic study result will help surgeons to place the screw safely and accurately.

• Journal of Radiation Protection and Research
• /
• 제36권3호
• /
• pp.107-118
• /
• 2011

Conventional (SRS) and fractionated (FSRS) stereotactic radiosurgery necessarily require stringent overall target point accuracy and precision. We determine three-dimensional intracranial target point deviations (TPDs) in a whole treatment procedure using magnetic resonance image (MRI)-based polymer-gel dosimetry, and suggest a technique for overall system tests. TPDs were measured using a custom-made head phantom and gel dosimetry. We calculated TPDs using a treatment planning system. Then, we compared TPDs using mid bi-plane and three-dimensional volume methods with spherical and elliptical targets to determine their inherent analysis errors; finally, we analyzed regional TPDs using the latter method. Average and maximum additive errors for ellipses were 0.62 and 0.69 mm, respectively. Total displacements were 0.92 ${\pm}$ 0.25 and 0.77 ${\pm}$ 0.15 mm for virtual SRS and FSRS, respectively. Average TPDtotal at peripheral regions was greater than that at central regions for both. Overall system accuracy was similar to that reported previously. Our technique could be used as an overall system accuracy test that considers the real radiation field shape.

• 천문학논총
• /
• 제32권1호
• /
• pp.49-53
• /
• 2017

The point sources in the Bright Source Catalogue of the AKARI Far-Infrared Surveyor (FIS) were classified based on their FIR and mid-IR fluxes and colours into young stellar object (YSO) and extragalactic source types using a Quadratic Discriminant Analysis method (QDA) and Support Vector Machines (SVM). The reliability of the selection of YSO candidates is high, and the number of known YSO candidates were increased significantly, that we demonstrate in the case of the nearby open cluster IC348. Our results show that we can separate galactic and extragalactic AKARI point sources in the multidimensioal space of FIR fluxes and colours with high reliability, however, differentiating among the extragalactic sub-types needs further information.

• 한국항공우주학회지
• /
• 제49권1호
• /
• pp.21-30
• /
• 2021

탐색기를 탑재한 유도탄의 중기궤적은 탐색기 시야(FOV : Field-Of-View) 내에서 표적을 탐지하며, 전환 시점에서의 기동성을 최대화하도록 설계하는 것이 요구된다. 유도탄의 비행궤적 최적화 문제는 여러 구속조건이 적용된 비선형 문제로 일반적인 해석해를 도출하기 어렵기 때문에 그 동안 다양한 계산적인 방법들이 제시되어 왔다. 본 논문에서는 추진-활공 유도탄의 중기궤적 최적화 문제를 컨벡스 최적화 기법인 2차 원뿔 프로그래밍을 이용하여 산출하였다. 먼저, 운동방정식의 상태변수를 최소화하기 위해서 제어변수 구속조건이 추가된 제어변수 추가 형태의 운동방정식을 구성하였다. 또한, 자유 종말시간 문제와 추진시간 문제를 대처하기 위하여 정규화된 시간 변수를 독립 변수로 설정하였다. 그리고, 운동방정식과 제어변수 구속조건을 컨벡스 형태로 변환하기 위하여 각각 부분 선형화와 무손실 컨벡스 변환을 적용하였다. 마지막으로, 본 논문에서 제시된 방안의 타당성을 확인하기 위하여 비선형 최적화 프로그래밍 결과와 비교하였다.

• 한국지능시스템학회논문지
• /
• 제12권3호
• /
• pp.255-260
• /
• 2002

This paper describes a fuzzy-based system for analyzing the stress intensity factors (SIFs) of three-dimensional (3D) cracks. A geometry model, i.e. a solid containing one or several 3D cracks is defined. Several distributions of local node density are chosen, and then automatically superposed on one another over the geometry model by using the fuzzy knowledge processing. Nodes are generated by the bucketing method, and ten-coded quadratic tetrahedral solid elements are generated by the Delaunay triangulation techniques. The singular elements such that the mid-point nodes near crack front are shifted at the quarter-points, and these are automatically placed along the 3D crack front. The complete finite element(FE) model is generated, and a stress analysis is performed. The SIFs are calculated using the displacement extrapolation method. To demonstrate practical performances of the present system, semi-elliptical surface cracks in a inhomogeneous plate subjected to uniform tension are solved.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2020년도 전력전자학술대회
• /
• pp.346-347
• /
• 2020

This paper presents the two combination methods for leakage current reduction in photovoltaic system PCS. The leakage current in the photovoltaic system generated from the parasitic capacitance existing between the photovoltaic system and ground relevance to common mode voltage caused by PWM switching. Firstly, Leakage current reduced by a PWM method using two carriers with 180-degree phase different. Secondly, the leakage current is more reduced by connecting LCL filter to the mid-point of DC link. This combining method is revealed in PSIM simulation with 1 uF parasitic capacitance.