• YAKHAK HOEJI
• /
• v.44 no.5
• /
• pp.440-447
• /
• 2000

Microspheres of felodipine, which is one of the calcium channel blocker using a mixture of Eudragi $t^{R}$ RL, L, E, and cellulose on the base of Eudragi $t^{R}$ RS were investigated. Cremopho $r^{R}$ was added to each preparation of polymers in order to increase the release of felodipine from microspheres. Felodipine-loaded microspheres were prepared by a solvent evaporation method, which is based on dispersion of methylene chloride containing felodipine and polymers in 0.5 w/v % polyvinyl alcohol solution. The average diameter based on the size distribution of the felodipine-loaded microspheres was observed to be ca. 40-55 ${\mu}{\textrm}{m}$. A good and smooth surface were showed in all types of the microspheres. The amount of felodipine loaded was over 90 w/w % in all types of microspheres. The dissolution profiles of felodipine from microspheres were similar with each type of polymer, and about a 60 w/w % of the total amount of felodipine loaded to microsphere was released within 7 hours. Dissolution rate of felodipine from the microsphere was increased by addition of Cremophor. After oral administration of the felodipine-loaded microspheres in PVA solution and felodipine alone in PEG solution to rats, respectively, the pharmacokinetic study revealed that the Tmax values of the microspheres were observed in the range of 0.67~l.0 hr while that of the felodipine solution was obtained 0.33 hr. In addition, the AUC of the microspheres at 0 to 7 hr was remarkably increased in comparison to that of felodipine solution. These results revealed that the microspheres based on Eudragit RS could be a good candidate for the controlled release drug delivery system for felodipine.e.e.e.

• 한국생물공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.570-573
• /
• 2005

The spray method was chiefly used to prepare alginate microspheres. Additionally due to formation at mild conditions, the alginate microspheres were coated with chitosan. The particle size of alginate microspheres increased when the sodium alginate increased. Release pattern of OVA in alginate microspheres was evaluated at PBS buffer(pH 7.4) and HCl buffer(pH 1.2). Release rate of OVA from chitosan/alginate microsphere was also lower than that with the concentration of alginate in the microspheres, the amount of OVA released from alginate microspheres increased from alginate micorsphere. Therefore, the alginate microspheres can be prepared by spray rozzle for a protein drug delivery. OVA release from the alginate microspheres was controlled by a coating with chitosan.

• Biomedical Science Letters
• /
• v.12 no.4
• /
• pp.443-450
• /
• 2006

To demonstrate their possibilities as an enhanced vaccine delivery system, protein-loaded Poly lactide glycolide copolymer (PLGA) microspheres were prepared with different physical characteristics. Ethyl acetate (EA) solvent extraction process was employed to prepare microspheres and the effects of process parameters on drug release properties were evaluated. The biodeuadability of microspheres was also evaluated by the pH change and GPC (Gel permeation chromatography). Primary IgG antibody responses in BALB/c mice were compared with protein saline solutions as negative controls and adsorbed alum suspensions as positive controls after single subcutaneous injection for in vivo studies. The microspheres showed a erosion with a highly porous structure and did not keep their spherical shape at 45 days and this result could be confirmed by GPC. In vitro release of proteinous drug showed initial burst effect in all batches of microspheres, followed by gradual release over the next 4 weeks. PLGA microspheres were degraded until 45 days and the secondary structure of OVA was not affected by the preparation method. Enzyme-linked immunosorbent assays demonstrated that the single subcutaneous administrations of OVA-loaded PLGA microspheres induced enhanced serum IgG antibody response in comparison to negative and positive controls. These results demonstrated that microspheres providing the controlled release of antigens might be useful in advanced vaccine formulations for the parenteral carrier system.

• Archives of Pharmacal Research
• /
• v.29 no.12
• /
• pp.1179-1186
• /
• 2006

Cross-linked starch microspheres were prepared using different kinds of cross-linking agents. The influence of several parameters on morphology, size, swelling ratio and drug release rate from these microspheres were evaluated. These parameters included cross-linker type, concentration and the duration of cross-linking reaction. Microspheres cross-linked with glutaraldehyde had smooth surface compared with those prepared with epichlorhydrine or formaldehyde. The particle size increased with increasing the cross-linking time and increasing the drug loading. Swelling ratio of the particles was a function of cross-linker type but not the concentration or time of cross-linking. Drug release from starch microspheres was measured in phosphate buffer and also in phosphate buffer containing a-amylase. Results showed that microspheres cross-linked with epichlorhydrine released all their drug content in the first 30 minutes. However, cross-linking of the starch microspheres with glutaraldehyde or formaldehyde decreased drug release rate. SEM and drug release studies showed that cross-linked starch microspheres were susceptible to the enzymatic degradation under the influence of alpha-amylase. Changing the enzyme concentration from 5000 to 10,000 IU/L, increased drug release rate but higher concentration of enzyme (20,000 IU/L) caused no more acceleration.

• Biomolecules & Therapeutics
• /
• v.17 no.1
• /
• pp.98-103
• /
• 2009

Superparamagnetic iron oxide nanoparticles (SPIOs)-embedded chitosan microspheres were developed for magnetic resonance (MR)-traceable embolotherapy. SPIOs-loaded chitosan microspheres were prepared by emulsion and cross-linking technique and 100-200 ${\mu}m$ sized spherical microsparticles were obtained. Loading efficacy and loading amount of SPIOs in microspheres were about 40% and 0.26-0.32%, respectively, when measured by inductively coupled plasma atomic emission spectroscopy. Within 30 days, about 60% of the incorporated SPIOs were released from low cross-linked microspheres, whereas only about 40% of SPIOs was released from highly cross-linked microspheres. Highly cross-linked microspheres were more efficient for lower degree of swelling leading to secure entrapment of SPIOs in matrix. Prepared novel embolic microspheres are expected to be practically applicable for traceable embolotherapy with high resolution and sensitivity through magnetic resonance imaging (MRI).

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.3
• /
• pp.191-195
• /
• 2004

Drug delivery systems that are based on pectin have been studied for colon specific delivery using the specific activity of colon microflora. The aim of this study was to design a novel method of manufacturing pectin microspheres without oils and surfactants and to investigate the potential use of the pectin microspheres as an oral colon-specific drug carrier. The pectin microspheres were successfully formed using the spray drying method and crosslinking with calcium chloride. From the crosslinked pectin microspheres, indomethacin (IND) release was more suppressed than its release from non-crosslinked microspheres. In a low pH (pH 1.4) environment, the pectin microspheres released IND at an amount of about 18${\pm}$2% of the total loaded weight for 24 h while the release rate of IND was stimulated at neutral pH (pH 7.4). IND release from the pectin microspheres was increased by the addition of pectinase. The results clearly demonstrate that the pectin microspheres that were prepared by the spray drying and crosslinking methods are potential carriers for colon-specific drug deliveries.

• Archives of Pharmacal Research
• /
• v.19 no.2
• /
• pp.106-111
• /
• 1996

Alginate microspheres were prepared by the emulsification process as a drug delivery system of ampicillin sodium (AMP-Na). The preparation parameters such as the concentration of calcium chloride, the stirring time and the amount of AMP-NA were investigated. The alginate microspheres containing hydroxypropylmethylcellulose (HPMC) were found to be generally spherical, discrete and had smoother surfaces when compared to without HPMC. However, there was no significant difference in the release profile of AMP-NA from alginate microspheres prepared with or without HPMC. The concentration of calcium chloride solution and the stirring time in the preparation of alginate microspheres influenced the aggregation of alginate microspheres. The amount of AMP-NA in alginate microspheres influenced the surface morphology and the practical drug content in microspheres.

• Archives of Pharmacal Research
• /
• v.8 no.3
• /
• pp.159-168
• /
• 1985

In attempt to develop a drug delivery system using serum albumin microspheres, bovine serum albumin microspheres containing antitumor agent, cytarabine, were prepared. The shape, surface characteristics, size distribution, behavior of in vitro distribution, drug release behaior, and degradation of albumin microspheres in animal liver tissue homogenate and proteolytic enzyme were investigated. The shape of albumin microspheres was spherical and the surface was smooth and compact. The size distribution of the albumin microspheres was affected by dispersion forces during emulsification and albumin concentration. Distribution of albumin mirospheres after intravenous administration in rabbit was achieved immediately. In vitro, albumin microsphere matrix was so hard that it retained most of cytarabine except initial burst during the first 10 minutes, and the level of drug release during the initial burst was affected by heating temperature, drug/albumin concentration ratio and size distribution. After drug release test, the morphology of albumin micropheres was not changed. Albumin microsphere matrix was degraded by the rabbit liver tissue homogenate and proteolytic enzyme. The degree of degradation was affected by heating temperature.

• Archives of Pharmacal Research
• /
• v.28 no.5
• /
• pp.612-618
• /
• 2005

A mucoadhesive microsphere was prepared by an interpolymer complexation and solvent evaporation method, using chitosan and poly(acrylic acid) (PAA), to prolong the gastric resid ence time of the delivery system. The Fourier transform infrared results showed that microspheres were formed by an electrostatic interaction between the carboxyl groups of the PAA and the amine groups of the chitosan. X-ray diffraction and differential scanning calorimetry analysis showed that the enrofloxacin in the chitosan-PAA microsphere was molecularly dispersed in an amorphous state. Scanning electron microscopy of the surface and the quantity of mucin attached to the microspheres indicated that chitosan-PAA microspheres had a higher affinity for mucin than those of chitosan alone. The swelling and dissolution of the chitosan-PAA microspheres were found to be dependent on the pH of the medium. The rate of enrofloxacin released from the chitosan-PAA microspheres was slower at higher pH; therefore, based on their mucoadhesive properties and morphology, the chitosan-PAA microspheres can be used as a mucoadhesive oral drug delivery system.

• Elastomers and Composites
• /
• v.53 no.3
• /
• pp.136-140
• /
• 2018

In this study, research was conducted into the manufacture of thermally expandable microspheres for automotive underbody coatings and applications in industry. In particular, the relationship between heat resistance and the ratio of crosslinking agents and initiators in the manufacture of the thermally expandable microspheres was investigated. We focused on the results with various cross-linking agents; our aim was to make the walls of the microspheres thicker to solve the problem of reductions in size caused by shrinkage when the microspheres are heated to $T_m$ ($T_{max}$). We observed the sectional thickness and surface of the samples with thicker walls. The thick thermally expandable microspheres showed reduced shrinkage and excellent stability in spite of prolonged exposure to heat.