• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.3
• /
• pp.110-114
• /
• 2008

In this study, to examine the friction coefficient and wear amount of dental prosthesis, pin-on-disk type wear test were at room temperature. Vickers hardness and fracture toughness measurement of dental materials were preformed. Microscopic observations on worn surfaces of specimens were conducted by SEM. The friction coefficient of dental material was investigated according to weight and slinging velocity. dental material have investigated composed to nature teeth.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.107-113
• /
• 1996

This paper presents the experimental results on the cutting performance and wear characteristics of CBN ball end-mill. The influence of cutting fluids and rake angles on the tool performance is reported. It i found that the neat cutting oil is beneficial to obtain good surface roughness and 30 .deg. of rake angle gives the minimum tool wear. The microscopic investigations reveal that the coated carbide endmills wear by fracture whereas the CBN endimills wear by attritious mode.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.644-647
• /
• 2001

The investigations were discussed on the radiation effects of the electrical properties to the p-type MOS capacitors, which were irradiated by cobalt-60 gamma ray sources. The characteristics of capacitance-bias voltage(C-V) and of dielectric dissipation tarter-bias voltage(D-V) on the capacitors were measured at 1 [MHz] frequency. The microscopic behaviors of spate charges in oxide and silicon-silicon dioxide(Si- $SiO_2$) interface were investigated from the experimental data. The C-V characteristics are statical and convenient for the evaluation of the steady state behavior of carriers and interface states characteristics. While, the distribution and magnitude of space charges in oxide can be found out accurately on the $V_{dp}$ in D-V curves. The density of interface states can be deduced with ease from the magnitude of D-peak at depletion state. Thus, it is also concluded that the D-V curves are more useful and easier than conventional C-V curves for analysis of the microscopic and dynamic behavior of carriers in oxide and Si- $SiO_2$interface.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.2D
• /
• pp.105-111
• /
• 2010

Operating speed is one of key elements in the design and operation of freeway. Few studies have been carried out macroscopically to find characteristics of free-flow speed (FFS) using small sample size and not considering the conditions of traffic volume and the effects of hour periods. As an attempt to find out the characteristics of FFS, this study microscopically analysed both the distributions of freeway FFS and percentile speeds according to traffic volume and daily hour periods using huge sample size. It was found out that speed distributions are changed and showed different behaviors under the conditions of traffic volumes(1-5 veh/30sec) and daily hour periods(0-5, 6-8, 9-11, 12-19, 20-23). V85(85th percentile speed) at morning, night, and midnight period decreases according to increase in traffic volume respectively, whereas V85 at day time does not show considerable differences. So the behaviors of V85 according to hour periods dramatically changed according to the increase in traffic volume.

• Applied Microscopy
• /
• v.28 no.1
• /
• pp.107-119
• /
• 1998

This study was designed to investigate the appearence and the characteristics of the apoptotic cells and the process of the joint cavity formation in mouse knee joint. Fetal mouse knee joints from 15 to 19 days of gestation were used. Paraffin-embedded serial sections, stained with H & E for light microscopic observation, Epon 812 embedded thin sections for electron microscopic observation and Lowicryl HM 20 embedded thin sections for immune-electron microscopic observation were prepared. Monoclonal antibodies to $\beta-tubulin$ and polyclonal antibodies to tissue transglutaminase were used for immune-electron microscopic study. The results obtained were as follows. 1. At 15 days of gestation, blood vessels, which have invaded in the mesenchymal cells, were present in the synovium, to form the joint cavity in the future. 2. At 16 days of gestation, the joint cleft was first appeared and several RBCs were present in the joint cleft. The invasion of blood vessels into the joint cleft was continuing, and apoptotic cells were present in the inner cell layer, adjacent to the joint cleft. Necrotic cells were also present in the outer cell layer; they were present 18 days of gestation, but apoptotic cells did not appear after 17 days of gestation. 3. In the apoptotic cells, transglutaminase were localized around vacuoles and the marginal site of the cytoplasm. 4. In the apoptotic cells, tubulin was around the endoplasmic reticulum and the marginal site of the cytoplasm. In the late stage of apoptotic cells, tubulin was localized diffusely in the cytoplasm. Tubulin was also strongly labeled around in the cytoplasm of the neighboring cell at which the apoptotic body was phagocytosed. Tubulin labeled particles were apparently increased in the seperated apoptotic bodies. On the basis of the above findings, it is proposed that during the development of the mouse knee joint, blood vessel invasion first occurs and then apoptosis and cell necrosis follow it. In the apoptotic cell, present in the synovium of the developing knee joint of the mouse. it is suggested that the redistribution of tubulin is associated with apoptotic process. And transglutaminase overexpressed in the apoptotic cell.

• Journal of The Korean Association For Science Education
• /
• v.27 no.4
• /
• pp.337-345
• /
• 2007

The purposes of this study are to investigate and compare the characteristics of classification criteria of secondary school students and science teachers in relation to the three statesof matter. For this research, 76 middle school students in the7th grade who studied microscopic viewpoints about classifying the state of matter for the first time, 69 high school students in the 12th grade who studied Chemistry I and IIcourses successfully, and 130 secondary school science teachers, through a questionnaire. As a result, while having learned the three states of matter in the microscopic viewpoints, the majority of middle school students showed a high percentage of classification in the macroscopic viewpoints. For high school students, their percentage of classification included highmicroscopic viewpoints about solid and gas, the percentage of classification included macroscopic viewpoints about liquid state as alsohigh. The secondary school teachers gave answers in the macroscopic viewpoints and microscopic viewpoints equally, but their answers were just representation of the viewpoints list without the meaningful connection of the two type of viewpoints. To solve these problems, It is necessary to form connective change from the macroscopic viewpoints to the microscopic viewpoints about the criteria for classifying the States of Matter and various educational efforts.

• Journal of ILASS-Korea
• /
• v.16 no.1
• /
• pp.15-26
• /
• 2011

In this article, spray characteristics in CI engines fuelled with vegetable oils and its derivatives will be reviewed. Of edible vegetable oils, soybean oil and rapeseed oil were mainly investigated. Of inedible vegetable oils, jatropha oil and used frying oil were main concern on the research on the spray characteristics in CI engine. Spray angle and spray penetration were mainly examined among the macroscopic spray characteristics and Sauter mean diameter was only investigated among the microscopic spray characteristics. There exist six different definitions of spray angle which should be examined. Neat vegetable oil and biodiesel fuels show smaller spray angle than diesel fuel. Biodiesel fuel and vegetable oils and its blend have a longer spray penetration than diesel fuel. However, biodiesel blends with diesel shows the similar spray penetration with diesel fuel. SMDs in the biodiesel spray, vegetable oils and its blends spray are higher than that in the diesel spray.

• Journal of Ecology and Environment
• /
• v.40 no.3
• /
• pp.144-152
• /
• 2016

Background: The purpose of this study is to describe the morphological characteristics of the Aphanizomenon spp. and related species from the natural samples collected in the Nakdong River of South Korea. Results: Morphological characteristics in the four species classified into the genera Aphanizomenon Morren ex Bornet et Flahault 1888 and Cuspidothrix Rajaniemi et al. 2005 were observed by light microscopy. The following four taxa were identified: Aphanizomenon flos-aquae Ralfs ex Bornet et Flahault, Aphanizomenon klebahnii Elenkin ex Pechar, Aphanizomenon skujae $Kom{\acute{a}}rkov{\acute{a}}-Legnerov{\acute{a}}$ et Cronberg, and Cuspidothrix issatschenkoi ($Usa{\check{c}}ev$) Rajaniemi et al. Aph. flos-aquae and Aph. klebahnii always formed in fascicles; the others only occurred in solitary. Aph. flos-aquae was similar to Aph. klebahnii, whereas these species differed from each other by the size and shape of fascicles, which was macroscopic in Aph. flos-aquae and microscopic in the Aph. klebahnii. One of their characteristics was that trichomes are easily disintegrating during microscopic examination. C. issatschenkoi could be clearly distinguished from other species by hair-shaped terminal cell. Its terminal cell was almost hyaline and markedly pointed. Young populations of the species without heterocytes run a risk of a misidentification. Aph. skujae was characterized by akinete. Morphological variability of akinetes from natural samples collected in the Nakdong River was rather smaller than those reported by previous study. Conclusions: C. issatschenkoi are described for the first time in the Nakdong River. In addition, Aph. klebahnii and Aph. skujae are new to South Korea.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.3
• /
• pp.173-183
• /
• 2016

Various material characteristics of HSA800 steel were examined and a quantitative criteria about the homogeneity of the strength was proposed. Whether HSA800 steel is satisfied the criteria for homogeneity of the strength or not was also examined. From the test results, the material characteristics of 1/4 point from the extreme fiber in the Z-direction satisfied the KS requirements. The excellent directional properties and impact resistance at low temperatures were also showed from the test results. HSA800 steel satisfied the criteria of homogeneity for the strength of the steel. However, it showed that some structures were banded together at 2/4 point from extreme fiber in the Z-direction from the microscopic tests and attention is needed to be paid in that point.

• Elastomers and Composites
• /
• v.29 no.3
• /
• pp.213-225
• /
• 1994

The Purpose of this dissertation is to study the preparation technique and physical properties of expanded rubber. The respective samples of NR, NBR and the standard compounds of EPDM rubber were prepared by mixing plasticizer DOP and LCR in various ratio. And their vulcanization characteristics, physical properties and foaming states were studied. Vulcanization characteristics were investigated using cure curve that had been obtained from Oscillating Disk Rheometer study, and the microscopic photographs of foaming states were obtained using electron microscope. The vulcanization characteristics of the samples, DOP 30phr and LCR 30phr, were found to be suitable. The tests, like hardness test and resilience, tensile test on the physical properties of each sample showed that plasticizing efficiencies of DOP and LCR were almost the same. Oil resistance test exhibited DOP was better than LCR and compression set test showed LCR was excellent plasticizer. The foaming states of NR, EPDM compounds were uniform, but those of NBR compounds were not uniform. Consequently vulcanization characteristics, physical properties and foaming states of all the samples satisfied the SAE requirements.