• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.75-79
• /
• 2008

In this study, the numerical process for analyzing the automotive louver fin heat exchanger was developed with a 3D microscopic and semi-microscopic analysis. In the microscopic analysis, the simulation with the detailed meshes was performed for obtaining the characteristics of the heat exchanger. From this simulation, the numerical correlations of the heat transfer and flow friction were obtained. In the semi-microscopic analysis, the Semi-microscopic Heat Exchanger (SHE) method, which is characterized by a conjugate heat transfer and porous media analysis was used with the numerical correlation from the microscopic analysis. This analysis predicted the flow and heat transfer characteristics of the louver fin heat exchanger in the wind tunnel and vehicle. In the design of the louver fin heat exchanger, this numerical process can predict the performance and characteristic of the louver fin heat exchanger.

• 한국표면공학회지
• /
• 제37권3호
• /
• pp.137-145
• /
• 2004

This study surveys the microscopic wear of CVD TiN coatings in repeated sliding, using the SEM Tribosystem as in-situ system. According to the research, the depth of wear groove and the specific wear amount are changed by the transition of the microscopic wear mode. This investigation leads to the fact that the change of wear characteristics produces the transition of the wear mode. In this survey, four modes are observed for CVD TiN coatings with the thickness of 1.6$\mu\textrm{m}$: ploughing, powder formation, flake formation and coating delimitation. The microscopic wear properties is quantitatively evaluated in terms with the microscopic wear mode and the specific wear amount. These relationships prove that the observation of wear modes with a SEM Tribosystem is useful to evaluate wear properties.

• 한국자동차공학회논문집
• /
• 제13권6호
• /
• pp.7-12
• /
• 2005

In order to analyze the microscopic spray characteristics of free spray in ultra high pressure region, the droplets size and velocity of free spray injected under atmosphere condition were measured by PDPA. As injection pressure became ultra high pressure, the droplets size was decreased continuously due to the increase of mutual reaction between droplets and air. But the decreasing rate became moderate. The velocity was increased until 250 MPa, and then decreased over that of injection pressure. It was seemed that the droplet size was similar in range of $280\~350\;MPa$, but increased in 414 MPa, even though injection pressure was increased. The microscopic spray characteristics of free spray got worse in 414 MPa.

• 한국분무공학회지
• /
• 제25권1호
• /
• pp.15-20
• /
• 2020

This study aims to investigate injection rate and microscopic spray characteristics of diesel fuel containing fine air bubble (FBD). fine bubble was generated by cavitation theory using bubble generator. Fuel spray was injected into constant volume chamber and visualized by high speed camera. The injection rate data was acquired with bosch tube method. Injection rate of finebubble diesel was very similar with that of diesel. It showed slightly faster injection start by 5 ㎲ attributed to the low viscosity characteristics. In microscopic spray visualization, fine bubble diesel spray showed unsymmetric spray shape compared with diesel spray. It also showed very vigorous spray atomization performance during initial spray development. Improved atomization was also attributed to the low viscosity and surface tension of finebubble diesel fuel.

• Journal of the Korean Wood Science and Technology
• /
• 제15권1호
• /
• pp.22-55
• /
• 1987

본(本) 연구(硏究)는 육안적(肉眼的) 특성(特性)에 의한 목재식별(木材識別)의 속보(續報)로써 앞으로 생산가능(生産可能)한 한국산(韓國産) 단판수종(單板樹種)의 현미경적(顯微鏡的) 목재특성(木材特性)을 조사(調査)하여 합판공업(合板工業)에 필요(必要)한 기초자료(基礎資料)를 제공하기 위하여 실시(實施)하였다. 선정(選定)된 50수종(樹種)의 현미경적(顯微鏡的) 특성(特性)을 조사(調査)하여 수종별(樹種別)로 기재(記載)하였고 이를 바탕으로 하여 침엽수재(針葉樹材) 및 활엽수재별(闊葉樹材別)로 목재식별(木材識別) 검색표(檢索表)를 간략(簡略)하게 보고(報告)하면 다음과 같다.

• 한국언어정보학회:학술대회논문집
• /
• 한국언어정보학회 2007년도 정기학술대회
• /
• pp.459-470
• /
• 2007

This study explores the textual characteristics, more precisely the quantity and diversity of nouns, of Japanese prime ministers' Diet addresses. In the field of stylistics, textual characteristics independent of the content have been examined with the aim on detecting the authors, genres, and chronological variations of texts. This study focuses instead on textual characteristics related to the content of texts, namely the quantity and diversity of nouns, because our aim is to analyze texts to better understand two political phenomena: (a) the difference between the two types of Diet addresses delivered by Japanese prime ministers, and (b) the perceived changes made to these addresses by two powerful prime ministers. It is a case study of the microscopic characterization of texts, which has become more and more important with the expansion in the scope of stylistics and the production of a wide variety of new types of texts following the advent of the Web.

• Design & Manufacturing
• /
• 제7권1호
• /
• pp.50-54
• /
• 2013

Sewage treatment plants are energy hogs. Among many, aeration systems account for 40-50 percent of the total energy use. To save energy, strengthening oxygen transfer characteristics is necessary. In order to do so, microscopic bubble-creating equipment is a prerequisite. This study focuses on microscopic bubble-producing air diffuser manufacture to save energy and enhance oxygen transfer.

• Journal of Gastric Cancer
• /
• 제17권4호
• /
• pp.331-341
• /
• 2017

Purpose: This study aimed to evaluate the clinical significance of microscopic invasion to determine the adequate resection margin in early gastric cancer (EGC). Materials and Methods: A retrospective review was performed that included patients who underwent gastrectomy for clinical early gastric cancer (cEGC) at Seoul National University Hospital between January 2007 and December 2010. After subtracting the microscopic resection margin from the gross resection margin for each proximal or distal resection margin, microscopic invasion was represented by the larger value. Microscopic invasion and its risk factors were analyzed according to the clinicopathologic characteristics. Results: In total, 861 patients were enrolled in the study. Microscopic invasion of cEGC was $6.0{\pm}12.8mm$, and the proportion of patients with microscopic invasion ${\geq}0mm$ was 78.4%. In the risk group, tumor location, pT stage, and differentiation did not significantly discriminate the presence of microscopic invasion. The microscopic invasion of EGC-IIb was $13.9{\pm}16.8mm$, which was significantly greater than that of EGC-I. No linear correlation was observed between the overall tumor size and microscopic invasion (R=0.030). The independent risk factors for microscopic invasion ${\geq}20mm$ were EGC-IIb vs. EGC-I/IIa/IIc/III (odds ratio [OR], 3.103; 95% confidence interval [CI], 1.533-6.282; P=0.002) and male vs. female sex (OR, 1.655; 95% CI, 1.012-2.705; P=0.045). Conclusions: Male sex and EGC-IIb were independent risk factors for microscopic invasion ${\geq}20mm$. Examination of intraoperative frozen sections is highly recommended to avoid resection margin involvement, especially in cases of EGC-IIb.

• 한국기계가공학회지
• /
• 제10권3호
• /
• pp.100-107
• /
• 2011

To evaluate the wear characteristics of very thin ceramic coated layer, it is very important to investigate its wear process in great detail. An effective method for investigating the wear of a thin layer is the observation of wear process in microscopic detail, using in-situ system. In this study, based on the SEM Tribosystem as in-situ system, the microscopic wear mode of TiN coatings was investigated in repeated sliding. Consequently, four modes were revealed for TiN coatings: Ploughing, powder formation, flake formation and coating delimitation. Sc(Severity of contact) can clarify transition condition of those microscopic wear modes.

• 한국정밀공학회지
• /
• 제14권9호
• /
• pp.146-154
• /
• 1997

Ion implantation has been used successfully as a surface treatment technology to improve the wear. fatigue and corrosion resistances of materials. A modified surface layer by ion implantation is very thin(under 1 m), but it has different mechanical properties from the substrate. It has also different wear characteristics. Since wear is a dynamic phenomenon on interacting surfaces with relative motion, an effective method for investigtating the wear of a thin layer is the observation of wear process in microscopic detail using in-situ system. The change of wear properties produces the transition of wear mode. To know the microscopic wear mechanism of this thin layer, it is very important to clarify its microscopic wear mode. In this paper, using the SEM and AFM Rribosystems as in-situ system, the microscopic wear of Ti ion-implanted 1C-3Cr steel, a material for roller in the cold working process, was investigated in repeated sliding. The depth of wear groove and the speciffc wear amount were changed with transition of microscopic wear mode. The depth of wear groove with friction cycles in AFM tribosystem and specific wear amount of Ti ion-implanted 1C-3Cr steel were less about 2-3 times than those of non-implanted 1C-3Cr steel. The microscopic wear mechansim of Ti ion-implanted 1C-3Cr steel was also clarified. The microscopic wear property was quantitatively evaluated in terms of microscopic wear mode and specific wear amount.