• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.508-511
• /
• 2004

This study focused on the effect of autonomic microcapsules on the mechanical properties of structural material. Several types of microcapsules with healing agents were manufactured by varying agitation speed of high speed stirrer. The size distribution of microcapsules was measured by a particle size analzer. The epoxy specimens embedded with microcapsules were manufactured and the degree of cure of such epoxy specimen was measured by a differential scanning calorimetry. The tensile modulus and tensile strength in epoxy specimens embedded with microcapsules were evaluated in order to investigate the effects of microcapsules on mechanical properties of structural materials. The configuration of microcapsules and morphology of fracture surfaces for the epoxy specimen were examined by an optical microcope and a scanning electron microscope. According to the results, tensile strength of the epoxy specimen embedded with microcapsules was indicated a little reduction, but tensile modulus was not much affected on microcapsules.

• 약학회지
• /
• 제28권4호
• /
• pp.223-229
• /
• 1984

Microcapsules of indomethacin were prepared by the complex coacervation technique using gelatin-gum arabic as the wall-forming material. The effects of varying drug-to-matrix ratios and formalization time, and hydroxy propyl cellulose (HPC) added on the release of drug from microcapsules were studied. As the amount of wall-forming material increased, the drug content in the microcapsules decreased and the release of drug from microcapsules was retarded. The drug content was lower in the HPC added microcapsules than that in the microcapsules was retarded. The drug content was lower in the HPC added microcapsules than that in the microcapsules without HPC and the microcapsules with 1:4 drug-to-matrix ratio showed the slowest release. The release rate of the drug from microcapsules with 1:2 drug-to-matrix was delayed according to the increase of formalization time and the microcapsules formalized for 24hr showed ratio the most retardation.

• 한국의류학회지
• /
• 제26권5호
• /
• pp.684-690
• /
• 2002

The microcapsules containing fragrant material as functional compound were produced by in-situ polymerization. The prepolymer was made from urea-formaldehyde(UF) and melamine-formaldehyde(MF) as wall materials of microcapsules. The effects of wall material, dispersing agent and ratio of wall material to core material on the mean diameter variation were investigated. Thermal efficiency and release behavior of microcapsules were measured. The resultant UF and MF microcapsules are capable of preserving fragrant oil for long self-life.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.65-68
• /
• 2002

This study dealt with autonomic microcapsules with the healing agent for damage repair of the composite structures. Autonomic microcapsules were made of a urea-formaldehyde resin for shell of microcapsule and a DCPD for the healing agent. Thermal analysis was conducted by using a DSC and a TGA for the healing agent, microcapsules without the healing agent, and microcapsules with the healing agent. According to the results, autonomic microcapsules were verified to be so thermally stable that the healing agent was kept inside the microcapsule until the shell of microcapsules were burned out.

• 한국의류학회지
• /
• 제27권2호
• /
• pp.200-208
• /
• 2003

The purpose of this study is to propose scientific data and to develop complex\ulcornermultifunctional fibers by applying microcapsules containing rosewood oil on wool fabric. Polyurea was used as wall material of microcapsules. The parameters for adoptable condition are 20min of agitation time, 5000rpm of agitation speed, 4% of emulsifier concentration according to the observation with SEM and particle analyzer. The melting peak of microcapsules was shown to be 280$^{\circ}C$ The amount of released rosewood from microcapsules at 25$^{\circ}C$ was below 1 % and at 40% was below 3%. Therefore, polyurea microcapsules is capable of preserving rosewood oil for long self-life at normal temperature. Antimicrobial activity to dry cleaning and ironing cycle of wool fabric treated with microcapsules were maintained.

• Smart Structures and Systems
• /
• 제7권3호
• /
• pp.199-211
• /
• 2011

Using computational modeling, we design a pair of biomimetic microcapsules that exploit chemical mechanisms to communicate and alter their local environment. As a result, these synthetic objects can undergo autonomous, directed motion. In the simulations, signaling microcapsules release "agonist" particles, while target microcapsules release "antagonist" particles and the permeabilities of both capsule types depend on the local particle concentration in the surrounding solution. Additionally, the released nanoscopic particles can bind to the underlying substrate and thereby create adhesion gradients that propel the microcapsules to move. Hydrodynamic interactions and the feedback mechanism provided by the dissolved particles are both necessary to achieve the cooperative behavior exhibited by these microcapsules. Our model provides a platform for integrating both the spatial and temporal behavior of assemblies of "artificial cells", and allows us to design a rich variety of structures capable of exhibiting complex dynamics. Due to the cell-like attributes of polymeric microcapsules and polymersomes, material systems are available for realizing our predictions.

• Archives of Pharmacal Research
• /
• 제14권4호
• /
• pp.298-304
• /
• 1991

Isoprinosine, an antiviral agent with a bitter taste, has been clinically used up to a maximum of 4 g daily in 4-8 doses. In this investigation, isoprinosine was microencapsulated with ethylcellulose 22 cps, 50 cps and 100 cps by means of polymer deposition from cyclohexane through temperature change. Complete removal of cyclohexane from the microcapsules was necessary, since ethylcellulose-coated microcapsules obtained from cyclohexane medium were heavily solvated with cyclohexane and formed lumps even after drying. The displacement of cyclohexane by n-hexane during isolation of microcapsules (Method III) or the freezing of the anal-washed microcapsules before drying (Mothod II) provided the dried products which were more discrete microcapsules than those which were simply dried in the air overnight (Method I). Method III was especially the most effective procedure in preparing finer and more discrete microcapsules. The drug-release from microcapsules was influenced by the ratio of core to wall, the viscosity grade of ethylcellulose and the overall microcapsule size. The release rate was adequately fitted to both the first-order and the diffusion-controlled processes. It is therefore possible to design the release-controlled microcapsules with ethylcellulose of different viscosity along with various core to wall ratio.

• Journal of Pharmaceutical Investigation
• /
• 제28권1호
• /
• pp.7-13
• /
• 1998

The captopril microcapsules were prepared and were investigated by measuring their size distribution using Scanning Electron Microscopy(SEM) and dissolution of captopril. Cetyl alcohol microcapsules prepared by emulsion melted-cooled method with various ratios of drug to cetyl alcohol were spherical and uniform. The release rate of cetyl alcohol microcapsules was decreased proportionally as the content of cetyl alcohol increased but, the particle size of microcapsules was increased. The surface of cetyl alcohol microcapsules was comparatively rough as drug content increased. Pellet type microcapsules were prepared using fluidized-bed coating system by spraying captopril solution on nonpareil-seeds followed by applying $Eudragit^{\circledR}$ RS solution containing propylene glycol as a plasticizer. The release rate of drug from pellet type microcapsules decreased as the content of $Eudragit^{\circledR}$ RS increased.

• Composites Research
• /
• 제15권2호
• /
• pp.32-39
• /
• 2002

본 연구에서는 자가치료제를 저장할 수 있는 마이크로캡슐을 제조하기 위만 공정절차를 제시하고 자가치료제가 저장된 마이크로캡슐을 제조하였다. 이때 자가치료제는 DCPD(dicyclopentadiene), 마이크로캡슐은 요소-포름알데히드 수지로 구성되어 있으며 레이저 회절법을 이용한 입도분석기를 통해 마이크로캡슐의 크기와 입도분포를 측정하였다. 또만 DSC를 통해 자가치료제, 마이크로캡슐 박막을 형성하는 요소-포름알데히드의 수지, 자가치료제가 저장된 마이크로캡슐 등에 대한 열분석을 수행하였으며 자가치료제가 저장된 마이크로캡슐에 대해 TGA를 통해 연속적인 온도증가 및 일정한 온도 조건 하에서의 열안정성을 평가하였다. 연구결과에 따르면 자가치료제가 저장된 마이크로캡슐은 마이크로캡슐의 박막이 연소되기 전까지는 박막 자체가 자가치료제의 증발을 막아 주어 자가치료제를 안정적으로 저장할 수 있음을 알 수 있었다.

• Archives of Pharmacal Research
• /
• 제16권1호
• /
• pp.50-56
• /
• 1993

The microencapsulation of sodium naproxen with Eudragit. RS was studied by coacrtvation/phase separation process using Span 80 in mineral oil/acetone system. Various factors which affect the mciroencapsulation, e.g., stirring speed, and surfactant concentraction, Eudagit RS concentration and loading drug amounts were examined. For the evaluation of the prepared microcapsules, release rate, particle size distribution and surface appearance as well as in vivo test were carried out. The addition of n-hexane and freezing of microcapsules accelerated the hardening of microcapsules. The optimum concentration of Span 80 ti prepare the smallest microcapsules was the same value with the CMC of Span 80 in solvent system. When 1.5% (w/w) Span 80 was used, the smallest microcapsules were formed $(30.02\pm5.05\mu$ in diameter) belonging to the powder category showing smooth, round and uniform surface. The release of sodium naproxen was retarded by microencapsulation with Eudragit RS. The Eudragit RS microcapsules showed significantly increased AUC and MRT and deceased Cl/F in rabbits.