• 융복합기술연구소 논문집
• /
• 제10권1호
• /
• pp.31-36
• /
• 2020

The purpose of this study is to discuss how to introduce micro degree for innovation in convergence education in our university. To this end, the background of the introduction of micro and nano degrees and domestic and foreign applications were reviewed. The reason why the rate of students completing the multi-degree was low was that the credits required for graduation were higher than that of other domestic universities, and the difficulty of the courses offered in the convergence major did not match the students. In order to reduce the burden of students learning convergence subjects while acquiring new knowledge and skills, the introduction of a micro degree is considered to be an alternative to the current convergence education.

• 한국컴퓨터정보학회논문지
• /
• 제27권8호
• /
• pp.123-133
• /
• 2022

본 논문에서는 NCS에서 정의된 직무를 기반으로 직무의 수준을 고려한 수준별 마이크로디그리 직무능력인증 모델을 제안한다. 4차 산업혁명 등 빠르게 변화하는 기술환경을 따라가지 못하는 대학교육의 문제로 인해 인력의 미스매치가 발생하고 있다. 이를 해결하기 위해 고안된 나노디그리와 마이크로 디그리 체계를 사이버보안 인력의 직무능력 인증에 활용한다. NCS의 세분류 분야별 직무를 마이크로 디그리, 능력단위별 세부직무를 나노디그리로 정의하고, 수준별로 구분된 능력단위의 수준을 마이크로 디그리에 동일하게 적용한다. 그리고 이를 학위기반의 대학 학력에 상응하는 직무능력을 인증하는 체계이다. 이러한 체계를 영남이공대학교 사이버보안스쿨의 교육과정에 적용하여 NCS직무 기반으로 나노디그리 과정을 구성하는 방안을 제안하였다. 본 논문에서 제안하는 방법은 최근 들어 많은 대학들이 도입하고 있는 나노디그리와 마이크로디그리의 직무역량 인증을 위한 방법으로 사용가능하다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2210-2213
• /
• 2008

In the present study, effects of degree of confinement on heat transfer characteristics of a micro-scale slot jet impinging on a heated flat plate are experimentally investigated. The effects of Reynolds numbers (Re = $1000{\sim}5000$), lateral distances (x/B = $1{\sim}10$), nozzle-to-plate spacings (Z/B = $1{\sim}20$), and degree of confinement ($B_c$/B = 3, 48) on the Nusselt number are considered. The results show that the effects of the degree of confinement on the cooling performance of the micro-scale impinging slot jet are significant at lower nozzle-to-plate spacings and higher Reynolds numbers. In addition, it is shown that the cooling performance of the micro-scale unconfined slot impinging jet is 200% higher than that of the micro-scale confined slot impinging jet.

• 한국생산제조학회지
• /
• 제25권3호
• /
• pp.224-229
• /
• 2016

Recently, polymeric micro-fluidic biochips with numerous micro patterns on the surface were fabricated by injection molding for realizing low-cost mass production of devices. To evaluate the effects of process parameters on large-scale micro-structure replication, a $50{\times}50mm^2$ tool insert with surface structures having a patterns of trapezoidal shapes (height: $30{\mu}m$) was employed. During injection molding, PMMA was used; packing phase parameters and mold temperature were investigated. The replicated surface textures were quantitatively characterized by confocal laser microscopy with 10-nm resolution. The degree of replication at low mold temperatures was found to be higher than that at high mold temperature at the beginning of the packing stage. Thereafter, the degree of replication increased to a greater extent at higher mold temperatures; application of higher mold temperatures improved the degree of replication.

• 지질공학
• /
• 제24권2호
• /
• pp.179-189
• /
• 2014

We analyzed the three-dimensional distribution of micropores and internal structures in both fresh and weathered granite using micro-focus X-ray computed tomography (micro-CT). Results show that the pore radius in fresh granite is mostly in the range of $17-50{\mu}m$, the throat radius is in the range of $5-25{\mu}m$, and the coordination number (CN) of pores is less than 10. In contrast, the pore radius in weathered granite is mostly in the range of $20-80{\mu}m$, the throat radius is in the range of $8-30{\mu}m$, and the CN is less than 12. In general, a positive linear relationship exists between pore radius and CN. In addition, both the size and the density of pores increase with an increasing degree of rock weathering. The size of the throats that connect the pores also increases with an increasing degree of weathering, which induces fracture propagation in rocks. Micro-CT is a powerful and versatile approach for investigating the three-dimensional distributions of pores and fracture structures in rocks, and for quantitatively assessing the degree of pore connectivity.

• 한국표면공학회지
• /
• 제46권1호
• /
• pp.48-53
• /
• 2013

In the present work, it was investigated a behavior of hydrogen embrittlement at the subsurface zones of 590 DP steels by using the micro-Vickers hardness test. The micro-Vickers hardnessess of DP steels were measured to evaluate the degree of embrittlement as the effective hardening depths of subsurface zones with hydrogen charging conditions. The results showed that the distributions of micro-Vickers hardness in width varied from maximum hardness 239.5 Hv to minimum hardness 174 Hv, while the depth of effective hardening layer at the subsurface zones of DP steels was from $320{\mu}m$ to $460{\mu}m$ with hydrogen charging conditions, respectively. It was proposed that the distribution of microhardness be used as the evaluation index of the degree of embrittlement. But the variations of martensite volume fractions were not affected along depth of hardening at the same changing time, hydrogen charging times were appeared as an effective factor of the degree of embrittlement. Therefore, the micro-Vickers hardness test is an attractive tool for evaluation of hydrogen embrittlement at the subsurface zones of these DP steels.

• 한국정밀공학회지
• /
• 제30권6호
• /
• pp.596-600
• /
• 2013

We report here on the processing and manufacturing of thin film for printed electronics by micro-gravure coating system. The micro-gravure coating systems are consisted of various modules such as web and system tension controller, micro-gravure coating units, dispenser and hybrid dry units (UV, NIR, Hot air). Especially, for the optimization of system, the number of idle roller was minimized and tension isolating infeeder was included. Also, we applied four patterns circle, 45 degree, square and 35 degree for the optimizing coating thickness. The micro-gravure coating system which applied various patterns to enable continuous coating process and fast coating time compare with conventional batch coating system. In this paper, introduce of micro-gravure coating system and testing results of coating thickness (20~700nm), coating time (1~2sec) and surface roughness (3~12nm) by using micro-gravure coating system.

• 산경연구논집
• /
• 제14권12호
• /
• pp.1-9
• /
• 2023

Purpose: As China's economic development enters new normal, employee happiness degree of small and micro enterprises will take on new features. The purpose of this paper is to discover the characteristics of changes in employee happiness, and provide reference and management suggestions. Research design, data and methodology: This paper determined the factors affecting employee happiness, established a measure model of happiness, measured and analyzed employee happiness by selecting more than 1,108 employees from 30 domestic small and micro enterprises. Results: First, the overall level of happiness in small and micro enterprises is relatively low. Second, there is no significant difference in happiness perception among employees in terms of the six factors. Third, the employees of small and micro enterprises have the highest happiness in three issues, including work distribution, internal interpersonal relationships, and less institutional constraints, the happiness on the two compensation benefits and a democratic management issue is the lowest. Fourth, gender factor has no significant effect on employee happiness, while age, working years, education, position, and the nature of employment have a significant impact on happiness. Conclusions: Employee happiness of small and micro enterprises will take on new features. Some human resource management suggestions are proposed from different perspectives based on the survey results.

• 한국광학회지
• /
• 제16권2호
• /
• pp.113-120
• /
• 2005

LCD-BLU(liquid crystal device-back light unit)에 사용되는 도광판의 미세 산란패턴을 만드는 새로운 방법으로서, 실리콘 웨이퍼의 비등방 식각에 의해 자연적으로 형성되는 3차원 결정면 구조를 이용하는 방법을 제안하였다. 실리콘 3차원 결정면을 갖는 도광판과 프리즘 시트의 원판을 설계 및 제작하였고, casting 공정을 통해 PDMS 재질로 복제된 도광판을 제작하여 특성을 분석하였다. 측정 결과, 기존 인쇄형 도광판에 비해 실리콘피라미드 패턴의 도광판이 $10\%$ 증가된 정면 휘도 효율을 가질 수 있음을 실험적으로 검증하였다.

• Journal of the Optical Society of Korea
• /
• 제16권4호
• /
• pp.365-371
• /
• 2012

A three-dimensional integral-floating display with 360 degree horizontal viewing angle is proposed. A lens array integrates two-dimensional elemental images projected by a digital micro-mirror device, reconstructing three-dimensional images. The three-dimensional images are then relayed to a mirror via double floating lenses. The mirror rotates in synchronization with the digital micro-mirror device to direct the relayed three-dimensional images to corresponding horizontal directions. By combining integral imaging and the rotating mirror scheme, the proposed method displays full-parallax three-dimensional images with 360 degree horizontal viewing angle.