• Journal of Institute of Convergence Technology
• /
• v.10 no.1
• /
• pp.31-36
• /
• 2020

The purpose of this study is to discuss how to introduce micro degree for innovation in convergence education in our university. To this end, the background of the introduction of micro and nano degrees and domestic and foreign applications were reviewed. The reason why the rate of students completing the multi-degree was low was that the credits required for graduation were higher than that of other domestic universities, and the difficulty of the courses offered in the convergence major did not match the students. In order to reduce the burden of students learning convergence subjects while acquiring new knowledge and skills, the introduction of a micro degree is considered to be an alternative to the current convergence education.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.8
• /
• pp.123-133
• /
• 2022

In this paper, we propose a Leveled Micro-Degree Job Competency Certification Model that considers the level of the job based on the job defined in the NCS. There is a mismatch of manpower due to the problem of university education that cannot keep up with the rapidly changing technological environment caused by the 4th Industrial Revolution. The Nano-Degree and Micro-Degree systems designed to solve this problem are used for job competency certification of cyber security personnel. NCS sub-categorized job field is defined as Micro-Degree and detailed job by ability unit is defined as Nano-Degree, the level of the ability unit defined by level is equally applied to the Micro-Degree. And it is a system that certifies the job competency corresponding to the degree-based university academic background. By applying this system to the curriculum of Cyber Security School, Yeungnam University College, we proposed a method to configure the Nano-Degree course based on NCS duties. The method proposed in this paper can be used as a method for verifying job competency of Nano-Degree and Micro-Degree, which are recently introduced by many universities.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2210-2213
• /
• 2008

In the present study, effects of degree of confinement on heat transfer characteristics of a micro-scale slot jet impinging on a heated flat plate are experimentally investigated. The effects of Reynolds numbers (Re = $1000{\sim}5000$), lateral distances (x/B = $1{\sim}10$), nozzle-to-plate spacings (Z/B = $1{\sim}20$), and degree of confinement ($B_c$/B = 3, 48) on the Nusselt number are considered. The results show that the effects of the degree of confinement on the cooling performance of the micro-scale impinging slot jet are significant at lower nozzle-to-plate spacings and higher Reynolds numbers. In addition, it is shown that the cooling performance of the micro-scale unconfined slot impinging jet is 200% higher than that of the micro-scale confined slot impinging jet.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.3
• /
• pp.224-229
• /
• 2016

Recently, polymeric micro-fluidic biochips with numerous micro patterns on the surface were fabricated by injection molding for realizing low-cost mass production of devices. To evaluate the effects of process parameters on large-scale micro-structure replication, a $50{\times}50mm^2$ tool insert with surface structures having a patterns of trapezoidal shapes (height: $30{\mu}m$) was employed. During injection molding, PMMA was used; packing phase parameters and mold temperature were investigated. The replicated surface textures were quantitatively characterized by confocal laser microscopy with 10-nm resolution. The degree of replication at low mold temperatures was found to be higher than that at high mold temperature at the beginning of the packing stage. Thereafter, the degree of replication increased to a greater extent at higher mold temperatures; application of higher mold temperatures improved the degree of replication.

• The Journal of Engineering Geology
• /
• v.24 no.2
• /
• pp.179-189
• /
• 2014

We analyzed the three-dimensional distribution of micropores and internal structures in both fresh and weathered granite using micro-focus X-ray computed tomography (micro-CT). Results show that the pore radius in fresh granite is mostly in the range of $17-50{\mu}m$, the throat radius is in the range of $5-25{\mu}m$, and the coordination number (CN) of pores is less than 10. In contrast, the pore radius in weathered granite is mostly in the range of $20-80{\mu}m$, the throat radius is in the range of $8-30{\mu}m$, and the CN is less than 12. In general, a positive linear relationship exists between pore radius and CN. In addition, both the size and the density of pores increase with an increasing degree of rock weathering. The size of the throats that connect the pores also increases with an increasing degree of weathering, which induces fracture propagation in rocks. Micro-CT is a powerful and versatile approach for investigating the three-dimensional distributions of pores and fracture structures in rocks, and for quantitatively assessing the degree of pore connectivity.

• Journal of Surface Science and Engineering
• /
• v.46 no.1
• /
• pp.48-53
• /
• 2013

In the present work, it was investigated a behavior of hydrogen embrittlement at the subsurface zones of 590 DP steels by using the micro-Vickers hardness test. The micro-Vickers hardnessess of DP steels were measured to evaluate the degree of embrittlement as the effective hardening depths of subsurface zones with hydrogen charging conditions. The results showed that the distributions of micro-Vickers hardness in width varied from maximum hardness 239.5 Hv to minimum hardness 174 Hv, while the depth of effective hardening layer at the subsurface zones of DP steels was from $320{\mu}m$ to $460{\mu}m$ with hydrogen charging conditions, respectively. It was proposed that the distribution of microhardness be used as the evaluation index of the degree of embrittlement. But the variations of martensite volume fractions were not affected along depth of hardening at the same changing time, hydrogen charging times were appeared as an effective factor of the degree of embrittlement. Therefore, the micro-Vickers hardness test is an attractive tool for evaluation of hydrogen embrittlement at the subsurface zones of these DP steels.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.6
• /
• pp.596-600
• /
• 2013

We report here on the processing and manufacturing of thin film for printed electronics by micro-gravure coating system. The micro-gravure coating systems are consisted of various modules such as web and system tension controller, micro-gravure coating units, dispenser and hybrid dry units (UV, NIR, Hot air). Especially, for the optimization of system, the number of idle roller was minimized and tension isolating infeeder was included. Also, we applied four patterns circle, 45 degree, square and 35 degree for the optimizing coating thickness. The micro-gravure coating system which applied various patterns to enable continuous coating process and fast coating time compare with conventional batch coating system. In this paper, introduce of micro-gravure coating system and testing results of coating thickness (20~700nm), coating time (1~2sec) and surface roughness (3~12nm) by using micro-gravure coating system.

• The Journal of Industrial Distribution & Business
• /
• v.14 no.12
• /
• pp.1-9
• /
• 2023

Purpose: As China's economic development enters new normal, employee happiness degree of small and micro enterprises will take on new features. The purpose of this paper is to discover the characteristics of changes in employee happiness, and provide reference and management suggestions. Research design, data and methodology: This paper determined the factors affecting employee happiness, established a measure model of happiness, measured and analyzed employee happiness by selecting more than 1,108 employees from 30 domestic small and micro enterprises. Results: First, the overall level of happiness in small and micro enterprises is relatively low. Second, there is no significant difference in happiness perception among employees in terms of the six factors. Third, the employees of small and micro enterprises have the highest happiness in three issues, including work distribution, internal interpersonal relationships, and less institutional constraints, the happiness on the two compensation benefits and a democratic management issue is the lowest. Fourth, gender factor has no significant effect on employee happiness, while age, working years, education, position, and the nature of employment have a significant impact on happiness. Conclusions: Employee happiness of small and micro enterprises will take on new features. Some human resource management suggestions are proposed from different perspectives based on the survey results.

• Korean Journal of Optics and Photonics
• /
• v.16 no.2
• /
• pp.113-120
• /
• 2005

Luminous efficiency and uniformity in a LCD-BLU are mainly determined by fine scattering patterns formed on the light guide panel. We propose a novel fabrication method of 3-dimensional scattered patterns based on anisotropic etching of silicon wafers. Micro-pyramid patterns with 70.5 degree apex-angle and micro-prism patterns with 109.4 degree apex-angle can be self-constructed by the wet, anisotropic etching of (100) and (110) silicon wafers, respectively, and those patterns are easily duplicated by the PDMS replica process. Experimental results on spatial and angular distributions of irradiation from the light guide panel with the micro-pyramid patterns were very consistent with the calculation results. Surface roughness of the silicon-based micro-patterns is free from any artificial defects since the micro-patterns are inherently formed with silicon crystal surfaces. Therefore, we expect that the silicon based micro-patterning process makes it possible to fabricate perfect 3-dimensional micro-structures with crystal surface and apex angles, which may guarantee mass-reproduction of the light guide panels in LCD-BLU.

• Journal of the Optical Society of Korea
• /
• v.16 no.4
• /
• pp.365-371
• /
• 2012

A three-dimensional integral-floating display with 360 degree horizontal viewing angle is proposed. A lens array integrates two-dimensional elemental images projected by a digital micro-mirror device, reconstructing three-dimensional images. The three-dimensional images are then relayed to a mirror via double floating lenses. The mirror rotates in synchronization with the digital micro-mirror device to direct the relayed three-dimensional images to corresponding horizontal directions. By combining integral imaging and the rotating mirror scheme, the proposed method displays full-parallax three-dimensional images with 360 degree horizontal viewing angle.