• 한국구조물진단유지관리공학회 논문집
• /
• 제25권4호
• /
• pp.56-64
• /
• 2021

구조체 열화, 손상 등에 의해 발생하는 누수는 동결융해에 의한 체적 변화를 유발하는 주요 원인 중 하나이며, 콘크리트 내부의 미세균열, 표면 스케일링 등을 유발한다. 이러한 손상은 염화물 등 외기 유해물질 침투 및 확산을 가속화시킨다. 시설물 성능평가 세부지침(2020)에서 피복 콘크리트 품질과 동해환경 지표가 새롭게 제시되었으며, 피복 콘크리트 품질은 반발경도시험으로, 동해환경은 동결융해 싸이클 수로 평가한다. 본 논문에서는 빠른 동특성 기반 초음파 비선형성을 통해 동결융해에 의한 초기 미세손상을 평가하고자 하였다. 서로 다른 물-시멘트비(40%, 60%)와 공기량(1.5%, 3.0%)을 가지는 콘크리트 시험체를 제작하고, 동결융해 싸이클 수를 증가시키며 압축강도, 반발경도, 상대동 탄성계수, 초음파 비선형성을 측정하였으며, SEM을 활용하여 미세균열 발생 및 진전을 분석하였다. 그 결과, 상대동탄성계수 및 반발경도로는 확인이 어려웠던 초기 미세손상을 공진주파수 비선형성 측정을 통해 탐지할 수 있었으며, 콘크리트의 동결융해 저항성능을 예측할 수 있다는 가능성을 확인하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.667-672
• /
• 2002

Concrete cooled to very low temperature cyclically is deteriorated by ice formation in micro-pores. Although the factors to the deterioration are various, storage at very low temperature is mentioned as one of the factors. In practice, storage of cryogenic structure is kept at very low temperatures, and as such, it is important to take into consideration the influence of storage at such low temperature on the deterioration of concrete. Thus, in this study, the influence of storage on the deterioration of concrete at minimum temperatures taking into consideration the different W/C and air content.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.651-656
• /
• 2003

Durability of concrete is possibly related to externally-induced chemical attacks in addition to internally-induced deterioration. Externally-induced chemical attacks can be derived from various sources according to environmental conditions under which concrete structures are existing. The present study investigates the characteristic concrete deterioration and formation of secondary minerals by external chemical attacks under certain environmental condition. Petrographic microscope, SEM, EDAX, XRD analyses were conducted to identify secondary mineral formation and micro-structural analyses.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 2부
• /
• pp.59-60
• /
• 2011

This study is investigated reduced heat hydration and fresh and hardened concrete of high strength concrete by hydration heat reducing agent that is type of alcohol, paraffin wax micro-capsules, and strontium.

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권3호
• /
• pp.22-29
• /
• 2015

본 연구에서는 압축강도 24MPa 이상 열전도율이 기존 콘크리트보다 2배 감소된 구조용 단열성능 향상 콘크리트를 개발하고 현장적용하기 위한 실험을 진행하였다. 슬럼프 및 공기량 시험결과 Plain과 규조토 미분말을 사용한 배합은 경과시간에 따라 슬럼프와 공기량 저하가 나타났으며, 마이크로기포제를 사용한 배합은 슬럼프와 공기량 저하가 나타나지 않았다. 또한 단열성능 향상 재료를 사용한 배합의 단위용적질량은 Plain 대비 감소하였다. 압축강도는 단열성능 향상 콘크리트가 Plain보다 감소한 결과를 나타내었으나 목표강도 24MPa를 만족하였으며, 열전도율은 Plain보다 감소하는 경향을 보였다. 단열성능 향상 콘크리트의 동결융해 저항성은 Plain과 유사하였고, 중성화 저항성은 규조토 미분말을 사용한 배합이 재령 4주에 Plain과 유사했으며, 마이크로기포제를 사용한 배합은 Plain보다 중성화 저항성이 저하되었고, 길이변화율은 Plain보다 전체적으로 증가되었다.

• 한국콘텐츠학회논문지
• /
• 제15권3호
• /
• pp.415-426
• /
• 2015

초음파 속도를 이용한 콘크리트의 건전성 및 강도평가는 오랫동안 사용되어 왔으며, 현장조사에서 필수적이다. 콘크리트 내부의 공극률은 내구성 및 강도를 평가할 수 있는 주요인자이며, 초음파 진행에 방해가 되므로 공극률 변화에 따라 초음파 속도변화가 발생한다. 본 연구에서는 기존의 공극률 모델을 이용하여 콘크리트 내부를 통과하는 초음파 속도 모델링을 수행하였으며 실험값과의 비교하였다. 또한 인장 및 압축 재하 시험과 동시에 초음파 속도를 측정하여 재하 하중비를 이용한 모델링을 수행하였다. 압축영역에서는 하중재하비 50% 수준까지 초음파 속도가 약간 증가하였으며, 최대하중에 근접할수록 급격한 속도의 감소가 발생하였다. 인장영역에서는 압축영역과 다르게 초기부터 초음파 속도가 상당히 변화하였다. 제안된 기법은 콘크리트의 건전부 및 압축영역에서는 합리적인 결과를 보이고 있으며 인장영역에서는 미세균열 및 국소적인 골재치합을 고려한 보완이 필요할 것으로 판단된다.

• KIEAE Journal
• /
• 제14권4호
• /
• pp.133-138
• /
• 2014

The present study was carried out to assess the basic material properties and thermal behavior of light-weight foamed concrete panel mixed with PCM (Phase Changing Material). To do so, this study fabricated light-weight foamed concrete (1.0kg/m3) in pre-foaming method and mixed it with PCM micro capsule of 1-dodecanol and melamine to examine its physical and thermal properties. The results confirmed strength reinforcement effect by proper replacement ratio of fly-ash, which is an industrial by-product, and PCM. In addition, it found out that PCM-mixed light-weight foamed concrete had time delay and temperature reduction effect within the range of PCM phase transition according to the rise of outdoor temperature. It was also observed that the insulation performance of PCM-mixed light-weight foamed concrete was more dependent upon thickness than PCM replacement ratio.

• Advances in concrete construction
• /
• 제1권4호
• /
• pp.341-358
• /
• 2013

Due to fast growth in urbanisation, a highly developed infrastructure is essential for economic growth and prosperity. One of the major problems is to preserve, maintain, and retrofit these structures. To meet the requirements of construction industry, the basic information on all the mechanical properties of various concretes is essential. This paper presents the details of development of various concretes, namely, normal strength concrete (around 50 MPa), high strength concrete (around 85 MPa) and ultra high strength concrete (UHSC) (around 120 MPa) including their mechanical properties. The various mechanical properties such as compressive strength, split tensile strength, modulus of elasticity, fracture energy and tensile stress vs crack width have been obtained from the respective test results. It is observed from the studies that a higher value of compressive strength, split tensile strength and fracture energy is achieved in the case of UHSC, which can be attributed to the contribution at different scales viz., at the meso scale due to the fibers and at the micro scale due to the close packing of grains which is on account of good grading of the particles. Micro structure of UHSC mix has been examined for various magnifications to identify the pores if any present in the mix. Brief note on characteristic length and brittleness number has been given.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문 발표회
• /
• pp.27-31
• /
• 2003

To maintain serviceability of concrete structure more than proper it is necessary not only predict service life through periodical monitor but also need monitoring system to recognize optimal time and method for repair. Recently, CPGFRP, replacing some GFRP with CF, is developed and used for monitoring concrete fraction. But dramatic resistance change of CPGFRP is showed below 0.5% strain and it is not small strain in terms of monitoring micro crack in concrete. In other word, monitoring with CF is not suitable in low stress hut hight stress. In this study, we accessed applicable possibility and reliability of CPGFRP composite as monitoring sense that is proved very sensitive to stress through domestic and oversea previous study. CPGFRP composite plays a role in specimen like steel and increases flexural strength. CPGFRP composite shows resistance increasement in micro crack. In particular, CPUFRP is more sensitive than strangage in low stress. Resistance change ratio curve is very similar to strain curve so sensitivity and reliability is very excellent to monitor concrete fracture.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.27-31
• /
• 2003

To maintain serviceability of concrete structure more than proper it is necessary not only predict service life through periodical monitor but also need monitoring system to recognize optimal time and method for repair. Recently, CPGFRP, replacing some GFRP with CF, is developed and used for monitoring concrete fraction. But dramatic resistance change of CPGFRP is showed below 0.5％ strain and it is not small strain in terms of monitoring micro crack in concrete. In other word, monitoring with CF is not suitable in low stress but hight stress. In this study, we accessed applicable possibility and reliability of CPGFRP composite as monitoring sense that is proved very sensitive to stress through domestic and oversea previous study. CPGFRP composite plays a role in specimen like steel and increases flexural strength. CPGFRP composite shows resistance increasement in micro crack. In particular, CPGFRP is more sensitive than strangage in low stress. Resistance change ratio curve is very similar to strain curve so sensitivity and reliability is very excellent to monitor concrete fracture.