• 대한토목학회논문집
• /
• 제43권1호
• /
• pp.1-7
• /
• 2023

서로 다른 밀도를 가진 기포콘크리트 시편을 생성하고, 각 시편의 특성을 SEM, micro-CT 등의 미세구조 분석 방법을 활용하여 분석하였다. 서로 다른 재령 일자에 대한 기포콘크리트 시편의 공극과 고체 구조를 분석함으로써, 재령 기간이 재료 특성 변화에 미치는 영향을 살펴보았다. 각 기포콘크리트 시편의 압축강도와 열전도도를 측정하여, 재료 물성과 미세구조적 특성 간의 상관관계에 대하여 분석하였으며, 결과를 통해 밀도와 재령 기간이 재료 강도에 미치는 영향을 확인하였다.

• Steel and Composite Structures
• /
• 제43권6호
• /
• pp.773-784
• /
• 2022

This paper aims to investigate the axial compressive behavior of reinforced concrete (RC) columns strengthened with self-compacting and micro-expanding (SM) concrete-filled steel tubes (SM-CFSTs). Nine specimens were tested in total under the local axial compression. The test parameters included steel tube thickness, filling concrete strength, filling concrete type and initial axial preloading. The test results demonstrated that the initial stiffness, ultimate bearing capacity and ductility of original RC columns were improved after being strengthened by SM-CFSTs. The ultimate bearing capacity of the SM-CFST strengthened RC columns was significantly enhanced with the increase of steel tube thickness. The initial stiffness and ultimate bearing capacity of the SM-CFST strengthened RC columns were slightly enhanced with the increase of filling concrete strength. However, the effect of filling concrete type and initial axial preloading of the SM-CFST strengthened RC columns were negligible. Three equations for predicting the ultimate bearing capacity of the SM-CFST strengthened RC columns were compared, and the modified equation based on Chinese code (GB 50936-2014) was more precise.

• Advances in concrete construction
• /
• 제6권2호
• /
• pp.123-143
• /
• 2018

Self compacting concrete (SCC) has good flowability, passability and segregation resistance because of voluminous cementitious material & high coarse aggregate to fine aggregate ratio, and high free water availability. But these factors make it highly susceptible to shrinkage. Fibers are known to reduce shrinkage in concrete mixes. Until now for conserving cement, only pozzolanic materials are admixed in concrete to yield a SCC. Hence, this study compares the use of wollastonite micro fiber (WMF), a cheap pozzolanic easily processed raw mineral fiber, and flyash in yielding economical SCC for rigid pavement. Microsilica was used as a complimentary material with both admixtures. Since WMF has large surface area ($827m^2/kg$), is acicular in nature; therefore its use in yielding SCC was dubious. Binary and ternary mixes were constituted for WMF and flyash, respectively. Paste mixes were tested for compatibility with superplasticizer and trials were performed on a normal concrete mix of flexural strength 4.5 MPa to yield SCC. Flexural strength test and restrained shrinkage test were performed on those mixes, which qualified self compacting criteria. Results revealed that WMF admixed pastes have high water demand, and comparable setting times to flyash mixes. Workability tests showed that 20% WMF with microsilica (5-7.5%) is efficient enough in achieving SCC and higher flexural strength than normal concrete at 90 days. Also, stress rate due to shrinkage was lesser and time duration for final strain was higher in WMF admixed SCC which encourages its use in yielding a SCC than pozzolanic materials.

• 한국건축시공학회지
• /
• 제15권2호
• /
• pp.177-183
• /
• 2015

본 연구는 구조용 단열콘크리트의 개발을 위한 기초적 연구로서 HMS를 사용한 경량골재콘크리트의 물리, 역학적 특성 및 열전도 특성을 검토한 결과, HMS의 사용으로 인해 슬럼프의 감소가 발생하여 혼화제 사용량의 증가가 필요한 것으로 나타났으며, HMS 치환율의 증가에 따라 압축강도는 HMS의 낮은 계면부착력에 기인하여 감소하는 것으로 나타났다. HMS의 치환에 따라 일반콘크리트 및 경량골재콘크리트 대비 각각 최고 32, 68%의 열전도율 값을 나타내어 열전도율이 크게 개선되는 것으로 나타났다. 또한 물시멘트비의 증가는 압축강도를 감소시켰으나 열전도율은 개선하는 것으로 나타났다.

• 콘크리트학회논문집
• /
• 제15권6호
• /
• pp.802-810
• /
• 2003

이 논문에서는 균열성장에 따른 파괴기준의 변화를 고려할 수 있는 수정 특이-파괴진행대 이론이 제안되었다. 제안된 파괴이론의 파괴특성은 균열의 성장기준이 되는 미소균열단에서 에너지해방률과 미소균열단 뒤에 형성되는 파괴진행대에서 균열면 응력-변위 관계이다. 제안된 파괴이론에 의한 파괴에너지는 기존의 콘크리트 파괴실험 결과로부터 평가된 파괴에너지를 충분히 만족할 수 있었다. 실험자료의 분석결과는 파괴진행대에서 균열면 응력-변위 관계는 시험편의 기하학적 특성에 큰 영형을 받지 않으나, 에너지해방률의 파괴기준은 시험편의 기하학적 특성과 하중조건뿐만 아니라 균열성장길이에 영향을 받는 것을 보여준다. 25mm의 균열성장까지 일정한 값을 유지하던 에너지해방률은 균열성장에 대해 선형으로 최대 값까지 증가하였다. 충분한 크기의 시험편에서 최대 에너지해방률은 최대하중에서 발생되었으며, 최대하중 이후의 균열성장에 대해 이 값을 유지하였다. 균열성장에 따른 파괴기준의 변화는 미소균열의 성장과 국부화에 의한 것으로 판단된다. 에너지해방률에 의한 파괴기준의 평가는 콘크리트 파괴거동의 크기효과를 단순화하며, 미소균열의 성장과 국부화에 대한 정량화에 사용될 수 있을 것으로 기대된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 추계 학술논문 발표대회
• /
• pp.69-72
• /
• 2009

This research is focused on the applying of the foaming agent which can make the independent pore in the concrete structure in order to make a lightweight concrete structure. This lightweight foamed concrete can satisfy both the required strength and the mechanical properties as structural members. In addition, anti freezing-thawing properties also required. As a result of the unit volume-weight measurement, when the foaming agent mixed at 0.5% to 1%, the lightweight foamed concrete can be applied for the structural member. Also the density and compressive strength measurement results reveals that it will be suitable as structural member with 21MPa strength, when the density is betweenity8 to 1.9 and foaming agent quantities are 0.5% to 1%. Finally the result of freezing-thawing experiment, the effect freezing-thawing damage reduced according to adding foaming agent because those foaming agent make micro-pores in the structure which are not seen in the ordinary concrete structure.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.29-46
• /
• 1999

The performance based design obligates quantitative assessment of required performances by means of transparent and objective science. In this design scheme, simulation of both macro and micro-scale structural behaviors is thought to be a powerful tool. This paper proposes a way how to unify the structural safety and serviceability check method and durability assessment of RC structures. Though component chemical-physical processes are crudely assumed, system dynamics of micro-scale pore structure formation and macro-scale defects and deformation of structures was shown as possible and promising approach in future. The authors understand that the unification of structural and durability design has just started. For further progress and development, predictive tool of structural behaviors from birth to death of concrete under any specified environment and load serves as an essential technicality.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.535-538
• /
• 2005

The problem of the crack which occures from the reinforced concrete structure. could be caused by the complexed factors. When the crack happen, it caused fatal blemish to manage and maintain the structure such as structural problem, licking, spalling, viewing Even though they study and work hard to solve this kind of problem in the world, there are no countermeasure for perfect prevention of crack. After the crack checked out, a method of repair-reinforcement has been sutdied and operated actively. In this experiment, studied durability of repair material. Experiment wave and durability of epoxy and urethane's were shown good result, and micro cement's durability displayed result that is not good. Result of a repeat tired experiment displayed result that micro cement is bad.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.258-259
• /
• 2014

Modern concrete high safety, constructability and economy due to advantages such as buildings used for more than about 70%, but due to the low thermal performance is essential, such as installation of additional insulation is required, and therefore increase the cost of construction, as well as the construction period and condensation Symptoms such as a domestic environment, such as to inhibit the problem by generating such an improvement has been desired. In this study, we want to present the base line data for the development of improved insulation performance concrete with analyzing and evaluating the Durable Properties of the concrete combination of hollow glass microsphere and lightweight aggregate.

• 한국건축시공학회지
• /
• 제9권3호
• /
• pp.109-116
• /
• 2009

The magnesium sulfate solution digestion test carried out for resistance of concrete containing waste glass powder on magnesium sulfate attack. Moreover, it yielded S.D.F index was used for the criteria of quantitative assessment to the resistance of magnesium sulfate for the purpose of evaluation of chemical deterioration on concrete. Furthermore, to evaluate for micro-cracks within concrete and external corrosion, the weight variation of specimens and the dynamic elasticity were compared and analyzed and also the applicability was examined using the analysis of product of hydration through out observing external deformation and micro-structural deformation.