• 전기학회논문지
• /
• 제66권1호
• /
• pp.23-26
• /
• 2017

Social Welfare is useful concept for evaluating the effectiveness of an economic policy in micro economics. This paper focuses on Social Welfare(SW) of electricity market incorporating demand response(DR). Competition between DR and generation company is modeled as a simple bid function. DR function can be considered as an negative generation(called Negawatt) and as an element of modified demand function. These two approaches result in the same demand reduction, generation power, and the market price. However, SW in the modified demand function approach is not identical to SW in the Negawatt approach. It makes the numerical index of DR effectiveness less persuasive. This paper proposes modified definition of SW in the demand function approach. The proposed definition of SW leads the DR effectiveness index to be identical to that in the Negawatt approach.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2003년도 하계학술대회 논문집
• /
• pp.124-124
• /
• 2003

• 대한설비공학회지:설비저널
• /
• 제37권7호
• /
• pp.9-13
• /
• 2008

첨단 건물 및 도시 등에 설치된 유비쿼터스 센서 네트워크의 안정적인 운용을 위하여, 이 시스템에 지속적으로 전력을 공급할 수 있는 Micro Power Generation기술을 소개하고자 한다.

• 설비공학논문집
• /
• 제15권8호
• /
• pp.697-703
• /
• 2003

Cogeneration is the simultaneous generation of heat and electricity in a single unit, and is a highly energy-efficient technology compared to the independent generation of both products. Therefore, cogeneration has been widely introduced in many countries for use in industrial, commercial and residential applications. However, there have been few models with an output of less than 100 kilowatt. In the present study, a spark ignited gas engine with electric generation output of 10 kilowatts was developed for micro cogeneration package. The gas engine shows 26.7% of electric generation efficiency, NOx emission less than 10 ppm at 13% oxygen, 82 dB of Noise level, and about 3 seconds of switching time from idling to nominal power.

• 한국통신학회논문지
• /
• 제33권6C호
• /
• pp.480-486
• /
• 2008

전송 신호의 높은 PAPR (Peak-to-Average Power Ratio)은 OFDM (Orthogonal Frequency Division Multiplexing)의 주된 문제점중의 하나이다. PTS (Partial Transmit Sequences) 기법은 OFDM 신호의 PAPR의 통계를 개선하는 기법이다. 그러나 PTS 기법에서 위상 가중치의 선택을 위한 계산 복잡도는 서브블록의 수에 따라 지수적으로 증가한다. 본 논문에서는 ${\mu}$-GA (micro-Genetic Algorithm) 기반의 위상 가중치 탐색 알고리즘을 적용한 낮은 계산 복잡도를 갖는 PTS 기법을 제안한다. 위상 가중치의 탐색은 랜덤하게 생성한 5 개체의 개체군으로부터 시작한다. 이 중에서 적합도가 가장 큰 엘리트와 토너먼트 선택 방법에 의해 나머지 4 개체를 선택하고 교배 연산을 통해 다음 세대를 구성한다. 만일 생성된 세대가 수렴한다면 엘리트를 제외한 나머지 개체를 다시 랜덤하게 생성한다. 일정 세대 이상 PAPR이 개선되지 않거나 사전에 정해진 최대 세대수까지 진행하면 탐색을 종료한다. 제안하는 PTS 기법의 성능을 평가하기 위해 PAPR의 CCDF (Complementary Cumulative Distribution Function)를 이전의 PTS 기법과 비교한다.

• 대한전기학회논문지
• /
• 제36권9호
• /
• pp.651-654
• /
• 1987

There are a number of small scale application fields of ozone, such as food conservation and/or storage in refrigerators, containers and storage rooms, deodorization in the production and living areas, protection against biohazards, bleaching of fabrics, etc. For these applications, miniaturization, ozone controllability and costdown of the ozonizer are the most essential points, whereas power efficiency is the most imporant factor in the case of a large scale ozonizer used in various industrial applications. It has been developed a novel sawtooth-to-cylinder type micro-ozonizer meeting above the three points by using a negative pulse corona discharge. As a result of the observations of pulse coronas affecting ozone generation, it is found that the maximum ozone concentration is generated at the pulse streamer coronas in both positive and negative case. The ozone concentration (20ppm/2l/min) generated by the negative pulse corona is about 2 times higher than that of the positive pulse corona, and could be controllable linearly by adjusting the dc input voltage of the [supply-inth ] cinventional small scale ozonizers. As a result, the present ozonizer is also very good to be used as a micro-ozonizer.

• 조명전기설비학회논문지
• /
• 제28권9호
• /
• pp.67-72
• /
• 2014

Inflow or outflow from the water treatment plant and the sewage water has potential energy. If this potential energy can be converted into electrical energy by water turbine generator, it can help to save energy because of the high capacity utilization. So recently, micro hydro power plant is reviewed in the water treatment facility. If generation capacity is low, induction generator is primarily used. If output capacity is low, generated power is supplied to the inside load. Induction generator can cause voltage drop by the inrush current at a start-up and requires reactive power for magnetization. In this study, we analyzed the flow of power and voltage variation against inrush current that occurs when the induction generator starts under the terms that loads of linear and non-linear of the water purification plant are used. Analysis results are that the voltage drop is within an allowable range and the power factor is slightly reduced by the need of reactive power.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2002년도 유체기계 연구개발 발표회 논문집
• /
• pp.314-319
• /
• 2002

Performance analysis and test of a 50kW micro gas turbine is carried out. The present study was initiated in 1996 by KIMM researchers to develope a 50kW class turbogenerator gas turbine engine for hybrid vehicle propulsion system. but with its low emission and compactness, it seemed that it can also be applied as a source of distributed power generation. In this study, general description of the KIMM's efforts to acquire performance test skills of the self-made 50kW micro gas turbine engine. At present, non-load performance test up to 615000 rpm was accomplished and is expected to make through 80,000 rpm by the end of year. Several revisions in design and manufacture were made during the course of experiments. The resulting outputs is thought to be valuable for the further refinement of the system for eventual commercialization of the product.

• KIEAE Journal
• /
• 제15권1호
• /
• pp.89-95
• /
• 2015

The centralized power supply system and rainwater treatment system, which are major infrastructure in modern cities, are showing their limitations in accommodating environment load due to climate changes that has aggravated recently. As a result, complex issues such as shortage of reserve power and urban flooding have emerged. As a single solution, decentralized systems such as a model integrating photovoltaic system and rooftop greening system are suggested. When these two systems are integrated and applied together, the synergy effect is expected as the rooftop greening has an effect of preventing urban flooding by controlling peak outflow and also reduces ambient temperature and thus the surface temperature of solar cells is lowered and power generation efficiency is improved. This study aims to compare and analyze the monitoring results of four algorithms that define correlations between micro-climate variables around rooftop greening and the surface temperature of solar cells and generate their significance. By doing so, this study seeks to present an effective algorithm that can estimate the surface temperature of solar cell that has direct impact on the efficiency of photovoltaic power generation by observing climate variables.

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.154-159
• /
• 2005

The next generation of optical storage systems requires higher numerical aperture (NA) objective lenses and shorter wavelength laser in order to improve the unit areal density. A blu-ray technology satisfies a miniaturization and a high capacity which are the requirements of the portable device. In this paper, we analyze the optical performance of hybrid micro lens and do active alignment. The hybrid micro lens is manufactured by using a wafer based fabrication technology. Optical components of hybrid micro lens are evaluated. The measurement of the optical power, the spot size and the wavefront error awe performed to evaluate the hybrid micro lens with NA 0.85. Using the measured data, we estimate if the performance of hybrid micro lens corresponds to the designed performance. After the performance of hybrid micro lens is evaluated, the integrated optical pickup and the hybrid micro lens are assembled by active alignment using UV curing and the optical performance of SFFOP is satisfied with BD specifications.