• 한국공간구조학회논문집
• /
• 제11권1호
• /
• pp.77-85
• /
• 2011

본 논문은 마이크로 유전 알고리즘을 이용하여 그리드 구조물의 최적화를 수행하고 초기인장력이 최적화에 미치는 영향을 분석하였다. 최적화시 여러 제약조건을 설정하여 구조물의 물량이 최소화 되도록 부재의 단면을 찾는 최적 설계를 수행하였다. 알고리즘의 검증을 위해 10-bar 트러스트 예제로 설정하여 이전 연구 결과와의 비교를 하였다. 이를 바탕으로 초기인장력이 적용된 트러스트 구조물의 최적화가 가능한 다음과 같은 기법을 사용하여 그리드 형태인 72-bar 트러스의 최적화를 수행하였으며, 이전 연구결과와 비교하여 이를 입증하였다. 최적화시 초기인장력 크기를 달리하여 트러스 구조물의 최적화를 수행하였으며, 물량이 최소화되는 최적화된 초기 인장력 값도 찾았다.

• 한국학교보건학회지
• /
• 제29권2호
• /
• pp.63-70
• /
• 2016

Purpose: The purpose of this study was to find the factors influencing adolescents' adult media engagement. The study is based on Agnew's General Strain Theory (GST) and a micro-systemic perspective. Methods: The study examined 479 middle school freshmen who participated in the fourth wave of the Korean Children & Youth Panel Survey (KCYPS) conducted by National Youth Policy Institute. Data were analyzed through descriptive statistics, factor analysis, and reliability analysis using SPSS 22.0 Ver. Also, hypothesis testing was performed via covariance-based structure equation modeling (CB-SEM) using Amos 21.0 Ver. Results: Strain factors had positive effects on adolescent depression, and depression had a positive effect on adult media engagement. Also, cell-phone dependency had a positive mediation effect between depression and adult media engagement. Conclusion: The study's result identified the factors affecting adult media engagement. Therefore, we suggest intervention programs considering adolescents' strains, depression and cell-phone dependency to improve their health.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1929_1930
• /
• 2009

Fully embedded tunable bandpass filter (BPF) with inductive coupling circuits is newly designed and demonstrated for UHF TV tuner ranged from 500MHz to 900MHz receivers. Conventional RF tuning circuit with an electromagnetic coupled tunable filter has several problems such as large size, high volume, and high cost, since the electromagnetic coupled filter is comprised of several passive components and air core inductors to be assembled and controlled manually. To address these obstacles, compact tunable filter with inductive coupling circuit was embedded into low cost organic package substrate. The embedded filter was optimally designed to have high performance by using high Q spiral stacked inductors, high dielectric $BaTiO_3$ composite MIM capacitors, varactor diodes. It exhibited low insertion loss of approximately -2dB, high return loss of below -10dB, and large tuning range of 56.3%. It has an extremely compact size of $3.4{\times}4.4{\times}0.5mm^3$.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1663-1666
• /
• 2007

The finite element method is applied to analyze the deformation mechanisms in the closed-cell Al foam under the compression. The modeling of the real cellular structure proceeds with the concept of the reverse engineering. First of all, the small, $10{\times}\;10{\times}\;10mm^3$ sized specimens of the closed-cell Al foam are prepared. The micro focus X-ray CTsystem of SHIMADZU Corp. is used to scan the full structures of the specimens. The scanned structures are converted to the geometric surfaces and solids through the software for 3-D scan data processing, RapidFormTMof INUS Tech. Inc. Then the solid meshes are directly generated on the converted geometric solids for the finite element analysis. The large elastic-plastic deformation and 3-D contact problems for the Al cellular material are considered. The clear and successful analysis for the deformation mechanisms in the closed-cell Al foam is carried out through the comparison of the numerical results in this research with the referred experimental ones.

• 시스템엔지니어링학술지
• /
• 제7권1호
• /
• pp.57-69
• /
• 2011

Reliability means that a product maintains its initial quality and performance at certain period of time(time, distance, cycle etc) under given condition without failure. Given conditions include both environmental condition and operating condition. Environmental condition means common natural environment such as temperature, humidity, vibration, and working condition means artificial environment such as voltage, current load, install place, hours of use, which occurs during using the product. In the field of railway vehicles, although components of railway vehicles with reliability are the trend of mandatory as persisting period of railway vehicles is extended, using components of railway vehicles is insufficient for the practical reliability assessment. but the meaning of the first railway operating agency to acquire the parts in the field, the data suggest the reliability of products if you can and can show the reliability of modular units and modular units can provide the reliability of if you can present reliability of the entire system is thought to be here In this study, lifespan of micro-switch for master controller is analyzed and prediction is performed based on its field data considering the special circumstances of railway vehicles operating agency, such as a large number of trains operates on the same line.

• 대한기계학회논문집B
• /
• 제30권1호
• /
• pp.1-7
• /
• 2006

The characteristics of micro gaseous flows in microchannels have been analyzed in view of flow resistance using the direct simulation Monte Carlo (DSMC) method which is a molecule-based numerical modeling technique. For this purpose, a DSMC code where the pressure boundary condition was specified at the inlet and outlet, has been developed and the results of simulations showed satisfactory agreements with the analytic solution in the slip flow regime. (0.01 < Kn < 0.1) By varying the height and length of the microchannel, the effect of pressure difference between the inlet and outlet was examined. The present computation indicates that the curvature in pressure distribution along the channel increases due to the effect of compressibility when the pressure difference increases. To obtain the flow resistance regardless of the channel dimensions, a standard curve is devised in the present study by introducing the concept of unit mass flowrate and unit driving pressure force. From this curve, it is shown that in micro flows, a significant deviation from the laminar incompressible flow occurs by reducing the flow resistance.

• 소성∙가공
• /
• 제13권1호
• /
• pp.39-44
• /
• 2004

Transcribability of pit or land groove structures in replicating an optical disk substrate greatly affects the performance of a high-density optical disk. However, a solidified layer, generated during the polymer filling, deteriorates transcribability because the solidified layer prevents the polymer melt from filling the sub-micro patterns. Therefore, the development of the solidified layer during filling stage of injection molding must be delayed. For this delay, passive heating by insulation layer has been used. In the present study, to examine the development of the solidified layer delayed by passive heating, the flow of polymer melt with passive heating was analyzed. Passive heating markedly delayed the development of the solidified layer, reduced the viscosity of the polymer melt, and increased the fluidity of the polymer melt in the vicinity of the stamper surface with the sub-micro patterns. As a result, we predict that passive heating can improve transcribability of an optical disk substrate. To verify our prediction, we fabricated an optical disk substrate by using passive heating of a mold and measured the transcribability of an optical disk substrate.

• Tribology and Lubricants
• /
• 제24권6호
• /
• pp.320-325
• /
• 2008

The recent industrial application requires technical methods to get the cutting fluid droplet surfaces in particular from the viewpoint of topography and micro texture. To characterize the surface topography of droplet, the combination of the confocal laser scanning microscope (CLSM) and wavelet filtering is well suited for obtaining the droplet geometry encountered in tribological research. This technique indicates a better agreement in obtaining an appropriate droplet surface obtained by the CLSM over a detail range of surface accuracy (resolution: $2{\mu}m$). And the results allow an excellent accuracy in a measurement of a droplet surface. The combination of extended focal depth measurement configured and multi-scale wavelet filtering has proven that it can construct a droplet surface in a successive and accurate way. A multi-scale approach of wavelet filtering was developed based on the decomposition and reconstruction of droplet surface by 2D wavelet transform using db9 (a mother wavelet of daubechies). Also this technique can be extended to characterize the quantification of droplet properties and other field in a wide range of scales. Finally this method is verified to be a better droplet surface modeling in a micro scale arising in a mist machining.

• Smart Structures and Systems
• /
• 제15권5호
• /
• pp.1363-1372
• /
• 2015

Smart structures and intelligent systems play pivotal roles in numerous areas of applied sciences ranging from civil engineering to computer and communications systems engineering. Although such structures and systems have been intensively deployed in these areas, they have been, interestingly, very rarely deployed in the field of cultural heritage preservation.This paper presents one of thefirst such attempts. A new methodology is describedthat deploys smart structures andlinks them with artificial intelligence methods.These solutions are referred toas advanced hybrid engineering artefacts. By their use,important environmental factors can be monitoredin hard to access, remote or unsafe locationsby minimizing the need for human involvement. In addition toproviding safety the methodologyalso reduces costs and, most importantly,providesa new way to modelany particular micro-environment in a much more efficient way than this is possible with traditional ways. Last but not least, although themethodology has been developed for cultural heritage preservation, its application areas are much broader and it is expected that it will find its applicationin other domains like civil engineering and ecology.

• Interaction and multiscale mechanics
• /
• 제6권2호
• /
• pp.157-172
• /
• 2013

This paper presented an investigation of macromolecular suspension in a grooved channel by using the dissipative particle dynamics (DPD) with finitely extensible non-linear elastic (FENE) bead spring chains model. Before studying the movement and evolution of macromolecules, the DPD method was first validated by modeling the simple fluid flow in the grooved channel. For both simple fluid flow and macromolecular suspension, the flow fields were analyzed in detail. It is found that the structure of the grooved channel with sudden contraction and expansion strongly affects the velocity distribution. As the width of the channel reduces, the horizontal velocity increases simultaneously. Vortices can also be found at the top and bottom corners behind the contraction section. For macromolecular suspension, the macromolecular chains influence velocity and density distribution rather than the temperature and pressure. Macromolecules tend to drag simple fluid particles, reducing the velocity with density and velocity fluctuations. Particle trajectories and evolution of macromolecular conformation were investigated. The structure of the grooved channel with sudden contraction and expansion significantly influence the evolution of macromolecular conformation, while macromolecules display adaptivity to adjust their own conformation and angle to suit the structure so as to pass the channel smoothly.