• Tribology and Lubricants
• /
• 제27권1호
• /
• pp.40-44
• /
• 2011

The object of this study is to investigate influences of supplied lubricant quantities on spur gear's pitting life. Pitting is a sort of contact fatigue failures and made by a repetitive load. Basically, pitting is difficult to predict its life by an analysis due to many factors to be considered about tribology problems. In this paper, pitting life was proved by experiment using two roller machine. For a contact fatigue test, operating circumstances should be considered. During the test, temperature and lubricant quantities are considered and to investigate an influence of lubricant quantities, a comparison between optimally enough and not enough lubricant quantity was implemented.

• Fisheries and Aquatic Sciences
• /
• 제17권1호
• /
• pp.145-153
• /
• 2014

The motion of the otter board on a trawl can affect the motion of trawl nets, and the motion of the codend can affect fish selectivity. Preliminary measurements of the tilt of bottom trawl gear were carried out to compare the tilts of the otter board and codend. The tilt of the otter board was measured by Vector and tilt at 1.5 m anterior to the end of the codend, and the middle upper panel was measured with a micro-DST-tilt logger. Tilt data such as yaw, pitch, and roll were analyzed by the fast Fourier transformation method and global wavelet and event analyses for the period or amplitude. The mean period ${\pm}$ standard deviation of the tilt in the otter board, $(5-6){\pm}2s$, was similar to the period of the codend, $(4-6){\pm}(2-3)s$, whereas the amplitude of the codend was greater than that of the otter board. The yaw and pitch periods were not significantly different between the otter board and codend, but roll was different. Furthermore, the tilt period frequencies of the otter board and codend were not significantly different. Accordingly, the tilt motion of the codend was mostly related to the tilt of the otter board.

• 한국항공우주학회지
• /
• 제42권11호
• /
• pp.988-995
• /
• 2014

관측위성으로부터 획득된 영상데이터를 지상국에 효율적으로 전송하기 위해 2축 짐벌 형태의 지향성 X-band 안테나가 적용되고 있으며, 안테나의 고속 정밀지향성 확보를 위해 구비된 모터 및 기어 간의 부정확한 맞물림으로부터 발생되는 미소진동은 영상품질 저하의 원인으로 작용한다. 고해상도 관측위성의 지향성능 향상을 통한 고해상도 영상정보 획득을 위해서는 안테나 구동시 발생하는 미소진동이 주요 임무장비에 전달되지 않도록 미소진동 절연이 요구된다. 본 논문에서는 X-band 안테나의 미소진동절연을 목적으로 의탄성 SMA 메쉬와셔 진동 절연기를 제안하였으며, 정하중 시험을 통해 진동 절연기의 기본 특성을 확인하였다. 또한, X-band 안테나의 미소진동 시험을 통해 진동절연기 유무에 따른 진동절연성능을 비교 및 분석 하였다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2001년도 유체기계 연구개발 발표회 논문집
• /
• pp.361-366
• /
• 2001

A mim turbo-shaft engine of 50HP for UAV, which can be easily modified to turbo-prop and turbo-jet engine by sharing the core engine and has many applications to civilian demands and munitions, will be developed This kind of micro gas turbine engine has been developed mostly by the corporations which have special technology but are small in its scale. Especially, the gas turbine engine can be easily applied to other fields and developed by domestic technology, so that the sharing of technology is planed to realize through the cooperations with academies and research institutes. In this paper, the gas turbine engine, which has the compressor ratio of 3.8, the turbine inlet temperature of l180K and the engine speed higher than 100,000 rpm, is composed of centrifugal compressor, combustor, gas generator turbine, free power turbine and gear box. The competitiveness of the gas turbine engine can be obtained from minimizing its cost by the utilization of domestic infrastructure for the performance test and the decisive outsourcing.

• 한국기계가공학회지
• /
• 제13권1호
• /
• pp.85-91
• /
• 2014

The rotation of a spindle unit must be accurate for high-quality machining and to improve the quality of the machine tools. Therefore, the proper measurement of the rotation accuracy and ensuring a proper analysis are very important. Separate processes are necessary because spindle errors and roundness errors associated with the test balls can both factor into the measured rotation error values. We used three methods to discern test ball errors and analyzed which could be deemed as the most proper technique in a test of the rotation accuracy of the main spindle of a machine tool.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 추계학술대회
• /
• pp.22-24
• /
• 1996

Small size DC motor control method for portable drug delivery system has been developed to be used for the actuator of insulins pump. The control method gives the controllabilities both in high speed(40-50 revolution per second(rps)) DC motor drive and also in low speed(0.5-1rps). In low speed mode DC motor is controlled to act like stepping motor and in high speed to optimize power consumption. To control both mode modified bang bang control is suggested. Using this method small size DC motor(spec.) speed is controlled from 0.2 rps to 50 rps. Experimental setup is developed using micro-processor(PIC16C73, Micro Chips co., USA), motor turns checking circuitry, small size DC motor for pager(SM1012, Samhong co., Korea) and gear box. Results from experiment meet need for vailable load condition which is require for portable drug delivery system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.34-36
• /
• 1989

Since the linear step motor(LSM) has the merits which can be controlled the position and velocity by using the micro-computer and has no mechanical transducer such as belt and gear, it's usefullness has been fitted for the printer, x-y plotter, OA machinery and so on. In designing the LSM, we are faced up to the calculation of forces. in this paper, the permeance modeling method suited for the design of transverse flux type linear step motor(TFM) is presented and simulated.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.977-981
• /
• 2000

Direct drive linear motors have large potential for use as high speed machine tool feed units since they can increase machining rates and improve servo accuracy by eliminating gear related machining problems. So, in this paper, characteristic of 2-axis linear motor feed unit are studied and control gain are adjusted considering positioning, velocity, acceleration and static stiffness. We confirm linear motor feed unit are affected value of control gain sensitively, because drive directly. From the experiment, this feed unit has l${\mu}{\textrm}{m}$ micro step resolution, 5.7${\mu}{\textrm}{m}$ positioning accuracy and under 60${\mu}{\textrm}{m}$ circularity.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.291-291
• /
• 2000

A vehicle driving simulator is a virtual reality device which a human being feels as if the one drives a vehicle actually. Driving Operation System acts as an interface between a driver and a driving simulator. This paper suggests the driving operation system for a driving simulator. This system consists of a controller, DC geared motor, MR brake, rotary encoders, steeping motor and bevel gear box. Reaction force and torque on the steering system were made by DC_Motor and MR_Brake. Reaction force and torque on the steering system were compare between real car and a driving simulator. The controller based on the 80C196KC micro processor that manage and transfer signal.

• 한국융합학회논문지
• /
• 제9권10호
• /
• pp.257-263
• /
• 2018

본 연구는 트랜스미션에 들어가는 부품인 차동기어에 대한 자동 검사 장비를 개발하고자 하는 것이다. 본 기술개발은 Micro Vision 자동 검사 장비와 마이크로레이저 자동 검사 장비를 사용하여 만들 것이다. 이는 작업자가 부주의하게 가공한 제품을 전수검사 단계에서 불량률 0를 만들고자 한다. 본 연구를 통해 개발된 장비를 여러 분야 사업에 적용할 것이다. 포장회사, 너트 볼트 가공업체, 정밀 반도체 상단에 인쇄를 위한 업체, SMT 업체 등 다양한 분야에 비전검사 장비를 판매하고자 한다. 본 기술개발을 통해 불량률 0를 실현하면 모기업으로부터 안정적 물량 확보, 나아가 제품 신뢰도를 바탕으로 수출을 할 수 있는 기반마련의 기회도 가능하다. 자동검사시스템을 국내 자동차 부품 가공업체에 적용할 경우 우리나라 자동차의 신뢰도 또한 크게 상승 할 것으로 생각된다.