• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.318-321
• /
• 1997

This paper is about improving characteristic of plant by using micro-step driver method in 5 phase step motor for satisfying the condition of low oscillation and high accuracy in soldering machine. We choose open loop control method for minimizing hardware system and use one chip microprocessor, power MOSFET nd some device to realize accurate micro-step driver system.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.105-110
• /
• 2006

The highly integrated nature of polymer based organic light emitting diode (POLED) microdisplay technology, coupled with low voltage and low power electroluminescent light generation, combine to offer a very promising technology for use in portable and personal electronics products. We briefly describe the technology before discussing how to engineer the color gamut using whiteemitting polymer materials, microcavity device structure and color filter absorbance.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.357-358
• /
• 2008

In this paper, we propose a micro payment service based on Open API (Payment & Account Management API). To support a business model that enables operators to offer integrated billing, a payment and an account management API is crucial. This service is based on the architecture of Parlay X web services[1, 2]. We described the network architecture and the logic procedure for a micro payment service.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.727-730
• /
• 2003

Thin tin oxide film with nano-size particle was prepared on silicon substrate by hydrothermal synthetic method and successive sol-gel spin coating method. The fabrication method of tin oxide film with ultrafine nano-size crystalline structure was tried to be applied to fabrication of micro gas sensor array on silicon substrate. The tin oxide film on silicon substrate was well patterned by chemical etching upto 5${\mu}{\textrm}{m}$width and showed very uniform flatness. The tin oxide film preparation method and patterning method were successfully applied to newly proposed 2-dimensional micro sensor fabrication.

• Journal of Information Display
• /
• 제2권3호
• /
• pp.54-59
• /
• 2001

The role of $NH_3$ for vertical alignment of CNTs was investigated. The direct cause of the alignment was a dense distribution of catalytic metal particles, but which was kept catalytically active during the growth process by $NH_3$. This allows a dense nucleation of the CNTs, and consequently, assists vertical alignment through entanglement and mechanical leaning among the tubes. The CNTs grow in a base growth mode. Several evidences were presented including a direct cross-sectional TEM observation. Since Ni is consumed both by silicide reaction and by capture in the growing tube, the growth stops when Ni is completely depleted. This occurs faster for smaller particles, and thus a longer growth results in thin bottom with poor adhesion.

• ETRI Journal
• /
• 제40권2호
• /
• pp.275-282
• /
• 2018

Flash reduction of graphene oxide is an efficient method for producing high quality reduced graphene oxide under room temperature ambient conditions without the use of hazardous reducing agents (such as hydrazine and hydrogen iodide). The entire process is fast, low-cost, and suitable for large-scale fabrication, which makes it an attractive process for industrial manufacturing. Herein, we present a simple fabrication method for a flexible in-plane graphene micro-supercapacitor using flash light irradiation. All carbon-based, monolithic supercapacitors with in-plane geometry can be fabricated with simple flash irradiation, which occurs in only a few milliseconds. The thinness of the fabricated device makes it highly flexible and thus useful for a variety of applications, including portable and wearable electronics. The rapid flash reduction process creates a porous graphene structure with high surface area and good electrical conductivity, which ultimately results in high specific capacitance ($36.90mF\;cm^{-2}$) and good cyclic stability up to 8,000 cycles.

• 센서학회지
• /
• 제3권3호
• /
• pp.22-27
• /
• 1994

마이크로 산소분압센서의 특성에 맞는, CMOS op-amp로 구성된 potentiostat 및 I-V converter용 op-amp를 설계하였다. 시뮬레이션 결과, 설계된 potentiostat는 $l.1k{\Omega}$의 낮은 출력저항을 나타냈으며, 산소분압센서의 등가회로와 연결한 경우 $-3{\sim}2.5V$범위의 전압을 선형적으로 인가할 수 있었고 안정한 주파수 특성을 보였다. 또한 I-V converter의 입력 저항은 약 $30{\Omega}$으로 작았으며 좋은 직선성을 나타내었다.

• Journal of Welding and Joining
• /
• 제31권3호
• /
• pp.4-10
• /
• 2013

In electronic industry, the trend of future electronics will be flexible, bendable, wearable electronics. Until now, there is few study on bonding technology and reliability of bonding joint between chip with micro solder bump and flexible substrate. In this study, we investigated joint properties of Si chip with eutectic Sn-58Bi solder bump on Cu pillar bump bonded on flexible substrate finished with ENIG by flip chip process. After flip chip bonding, we observed microstructure of bump joint by SEM and then evaluated properties of bump joint by die shear test, thermal shock test, and bending test. After thermal shock test, we observed that crack initiated between $Cu_6Sn_5IMC$ and Sn-Bi solder and then propagated within Sn-Bi solder and/or interface between IMC and solder. On the other hands, We observed that fracture propated at interface between Ni3Sn4 IMC and solder and/or in solder matrix after bending test.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.106-107
• /
• 2008

과거 PCB 제조 공정의 주된 관심사는 한정된 시간안에 다량의 제품을 생산하기 위한 것에 초점이 맞추어져 있었으나, 최근 중국의 전자산업 시장진출에 따른 PCB 가격 하락 및 원자제 가격 상승으로 인하여 생산 단가를 낮출 수 있는 방법으로 시선을 돌리고 있다. 특히, PCB 제조 공정에서, 생산 가격을 낮출 수 있는 방법중 가장 큰 비중을 차지하고 있는 것은, 습식 에칭 시 사용되는 용액(에칭액)의 사용 양을 제어함으로써, 화학 약품의 구입에 따른 비용 및 사용된 약품을 처리하는 비용을 줄일 수 있는 방법을 찾으려 노력하고 있다. 그러나, 애칭액을 효율적으로 제어하기 위해서는 여러 센서에서 나오는 데이터를 통합하여 진단할 수 있는 시스템이 필요하다. 그러나, 센서에 의한 데이터가 다양함에 제어 알고리듬이 복잡함에 따라 효율적인 제어 시스템이 개발되기 힘들다는 문제점이 있다. 본 논문에서는 이점에 착안하여, 인공지능 알고리듬을 이용한 애칭액 신액 투입조건을 실시간으로 제어 할 수 있는 시스템을 제안한다. 제안된 시스템을 사용하여, 애칭액을 균일하게 유지함에 따라 애칭액의 사용량을 줄일 수 있을 뿐 아니라, 폐액을 일정하게 관리할 수 있음을 확인하였다.

• 한국군사과학기술학회지
• /
• 제21권2호
• /
• pp.147-157
• /
• 2018

There are increasing demands to provide early warning against intruding drones and cope with potential threats. Commercial anti-drone systems are mostly based on simple target detection by radar reflections. In real scenario, however, it becomes essential to obtain drone radar signatures so that hostile targets are recognized in advance. We present experimental test results that micro-Doppler radar signature delivers partial information on multi-rotor platforms and exhibits limited performance in drone recognition and classification. Afterward, we attempt to generate high resolution profile of flying drone targets. To this purpose, wide bands radar signals are employed to carry out inverse synthetic aperture radar(ISAR) imaging against moving drones. Following theoretical analysis, experimental field tests are carried out to acquire real target signals. Our preliminary tests demonstrate that high resolution ISAR imaging provides effective measures to detect and classify multiple drone targets in air.