• Journal of Food Hygiene and Safety
• /
• v.34 no.6
• /
• pp.534-541
• /
• 2019

his study assessed microbial contamination of leeks and leek-cultivated soil. Leeks and leek-cultivated soil were collected in A and B regions and accounted for 39 and 33 samples, respectively. All of the samples were analyzed for the presence of sanitary indicator bacteria (total aerobic bacteria, coliforms and Escherichia coli), Salmonella spp., E. coli O157:H7, Listeria monocytogenes, and Bacillus cereus. In A and B region, the total aerobic bacteria was in the range of 5.87-8.78 log CFU/g for leeks and 5.94-8.45 log CFU/g for leek-cultivated soil. The coliform in leeks and leek-cultivated soil was in the range of 1.20-7.36 log CFU/g and 2.45-5.87 log CFU/g, respectively. B. cereus was detected from some of the samples while other pathogens were not detected. This study provides important background information on the microbiological safety of fresh vegetable cultivation environments.

• Journal of Bio-Environment Control
• /
• v.22 no.4
• /
• pp.341-348
• /
• 2013

Maintenance of adequate soil tension or content during the period of crop growth is necessary to support optimum plant growth and yields. A better understanding of soil tension and content for precision irrigation would allow optimal soil water condition to crops and minimize the adverse effects of water stress on crop growth and development. This research reports on a comparison of soil water tension and content variations in differently textured soils over time under drip irrigation using two different water management methods, i.e. pulse time and required water irrigation methods. The pulse time-based irrigation was performed by turning the solenoid valve on and off for preset times to allow the wetting front to disperse in root zone before additional water was applied. The required water estimation method was a new water control logic designed by Rural Development Administration that applies the amount of water required based on a conversion of the measured water tension into water content. The use of the pulse time irrigation method under drip irrigation at a high tension of -20 kPa and high temperatures over $30^{\circ}C$ was not successful at maintaining moisture tensions within an appropriate range of 5 kPa because the preset irrigation times used for water control could not compensate for the change in evapotranspiration during day and night. The response time and pattern of water contents for all of the tested soils measured with capacitance-based sensor probes were faster and more direct than those of water tensions measured with porous and ceramic cup-based tensiometers when water was applied, indicating water content would be a better control variable for automatic irrigation. The required water estimation-based irrigation method provided relatively stable control of moisture tension, even though somewhat lower tension values were obtained as compared to the target tension of -20 kPa, indicating that growers could expect to be effective in controlling low tensions ranging from -10 to -20 kPa with the required water estimation system.

• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.309-315
• /
• 2009

Maintenance of adequate soil water content during the period of crop growth is necessary to support optimum plant growth and yields. A better understanding of soil water movement for precision irrigation would allow efficient supply of water to crops, thereby resulting in minimization of water drainage and contamination of ground water. This research reports on the characterization of spatial and temporal variations in water contents through three different textured soils, such as loam, sandy loam, and loamy sand, when water is applied on the soil surface using an one-line drip irrigation system and the soils are dried after the irrigation stops, respectively. Water contents through each soil profile were continuously monitored using three Sentek probes, each consisting of three capacitance sensors at 10, 20, and 30cm depths. Spatial variability in water content for each soil type was strongly influenced by soil textural class. There were big differences in wetting pattern and the rate of downward movement between loam and sandy loam soils, showing that the loam soil had a wider wetting pattern and a slower rate of downward movement than did the sandy loam soil. The wetting pattern in loamy sand soil was not apparent due to a low variability in water content (< 10%) by a lower-water holding capacity as compared to those measured in the loam and sandy loam soils, implying that the rate of water drainage below a depth of 30cm was high. When soils were dried, there were highly exponential relationships between water content and time elapsed after irrigation stops ($r^2$${\geq}$0.98). It was estimated that equilibrium moisture contents for loam, sandy loam, and loamy sand soils would be 17.6%, 6.2%, and 4.2%, respectively.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.3
• /
• pp.312-319
• /
• 2009

Statement of problem: Delamination of veneering porcelain from underlying ceramic substructures has been reported for zirconia-ceramic restorations. Colored zirconia cores for esthetics have been reported that their bond strength with veneered porcelain is weaker compared to white zirconia cores. Purpose: This study aimed to investigate the shear bond strength by manufacturing the veneering porcelain on the colored zirconia core, using the layering technique and heat-pressing technique, and to evaluate the clinical stability by comparing the result of this with that of conventional metal ceramic system. Material and methods: A Metal ceramic (MC) system was tested as a control group. The tested systems were Katana zirconia with CZR (ZB) and Katana Zirconia with NobelRondo Press (ZP). Thirty specimens, 10 for each system and control, were fabricated. Specimen disks, 3 mm high and 12 mm diameter, were fabricated with the lost-wax technique (MC) and the CAD-CAM (ZB and ZP). MC and ZB specimens were prepared using opaque and dentin veneering ceramics, veneered, 3 mm high and 2.8 mm in diameter, over the cores. ZP specimens were prepared using heat pressing ingots, 3 mm high and 2.8mm in diameter. The shear bond strength test was performed in a Shear bond test machine. Load was applied at a cross-head speed of 0.50 mm/min until failure. Mean shear bond strengths (MPa) were analyzed with the One-way ANOVA. After the shear bond test, fracture surfaces were examined by SEM. Results: The mean shear bond strengths (SD) in MPa were MC control 29.14 (2.26); ZB 29.48 (2.30); and ZP 29.51 (2.32). The shear bond strengths of the tested systems were not significantly different (P > .05). All groups presented cohesive and adhesive failures, and showed predominance of cohesive failures in ceramic veneers. Conclusion: 1. The shear bond strengths of the tested groups were not significantly different from the control group (P >.05). 2. There was no significant different between the layering technique and the heat pressing technique in the veneering methods on the colored zirconia core. 3. All groups presented cohesive and adhesive failures, and showed predominance of cohesive failures in ceramic veneers.

• The Korean Journal of Rehabilitation Nursing
• /
• v.5 no.1
• /
• pp.7-17
• /
• 2002

The purpose of this study was to investigate the effect of taping therapy on activities of daily livings (ADL), hand function and range of motion in poststroke-hemiplegic patients. Sample were selected from 20 poststroke-hemiplegic patients at public health center in the period from September 5 to November 21, 2001. The research design was one group pretest-posttest design. The hemiplegia period of the participants was from one year to five years. The pretest and posttest included measuring activity of daily livings(ADL), instrumental activity of daily livings(IADL), hand function, range of motion, quality of life. In this research design, a treatment were to expose taping therapy who were received self-help management program. This self-help management program was composed of five sessions and each session had health education on stroke, diet, risk factor, ROM exercise and recreation. 20 patients were treated with kinesio taping(Nippon Sigmax Co., Ltd., Benefact(r), width 50mm). Tapes were applied to the Deltoid, Supraspinatus, Infraspinatus, Brachioradialis with paralyzed upper extremity. The taping therapy was performed once a week for 5 weeks. SPSS Win 8.0 was used for the data analysis. The results of this study were as follows: 1) The score of BADL was increased from 30.5 to 33.95 after program, and that was statistically significant(p=.019). 2) The score of IADL was increased from 11.6 to 12.75 after program, but that was statistically insignificant(p=.161). 3) The score of hand function was increased from 17 to 20.35 after program, and that was statistically significant(p=.026). 4) The shoulder's ROM(p=.000) and wrist's ROM(p= .004) were significantly increased. According to the results of this study, taping therapy is effective for improving ADL, hand function, ROM, quality of life. However, this study found no significant differences in IADL. Consequently, these findings showed that the taping therapy was effective in improvement of physical aspects(BADL, hand function, upper extremity's ROM) in poststroke-hemiplegic patients.

• Women's Health Nursing
• /
• v.7 no.4
• /
• pp.642-656
• /
• 2001

The purpose of this study is to find the difference of the climacteric symptoms and quality of life according to hormone replacement therapy (HRT) in climacteric women. The research design was a descriptive survey with questionaries. A convenience sample of 181 climacteric women aged 45-65 who had climacteric symptoms were selected in Kwangju city, Korea. Sixty-six climacteric women among those subjects were receiving HRT at K university hospital in Kwangju city. Data were collected by the interview with questionaries from Feb 3. 1999 to March 25, 1999. Climacteric symptoms were measured using scores developed by Neugarten(1965) and modified by Park(1989), and the quality of life scale related to climacteric symptoms developed by Hildtich(1996) and modified Kim(1998). Data were analyzed by $x^2$-test, t-test, ANOVA and Pearson's correlation procedures, using SAS/win PC+. The results were as follows ; 1. No statistically significant differences were found between the receiving HRT group and not receiving HRT group in demographic, obstetrical and health related characteristics. 2. There were no significant difference on the climacteric symptoms between the group of women receiving HRT (score 2.4) and the group of women who were not (score 2.6) except psychological area (t= 2.407, p= 0.017). 3. The quality of life of the group of women receiving HRT was significantly higher than that the group of women who were not (t=2.151, p=.032). 4. The quality of life of the group of women receiving HRT were high scores There were significantly high of the quality of life in the vaso-motor change area (t=2.634, p= 0.009), psycho-social change area (t=3.239, p=0.001), and physical change area (t=2.031, p=0,043) in the group of receiving HRT compared to not receiving HRT group. 5. The variables showed significantly differences on the degree of climacteric symptoms of the group of women not receiving HRT were the subjective health state (t=15.81, p=0.000), age (t=7.50, p=0.007), feeling of menopause (t=30.88, p=0,000) and climacteric periods (t=8.66, p=0.003), and receiving HRT were number of para (t=3.95, p=0.050) and feeling of menopause (t=3.94, p=0.050). 6. The variables showed significantly difference on the quality of life of the group of women not receiving HRT were the subjective health state (t=4.14, p=0.044) and feeling of menopause (t=10.86, p=0.001). 7. There were significantly positive correlations between the climacteric symptoms and the quality of life in climacteric women (r=0.512, p=0.000).

• The Journal of Korean Academy of Sensory Integration
• /
• v.17 no.2
• /
• pp.18-30
• /
• 2019

Objective : The purpose of this study was to investigate the effect of Ayres's sensory integration (ASI) intervention on the sensory processing ability and motor development in children with Developmental Delay. Methods : 9 children in the experimental group and 8 children in the control group participated in this study for Developmental Delay children aged 3-5 years. For research tool, the Short Sensory Profile (SSP), Peabody Developmental Motor Scale-2 (PDMS-2) are used. In the experimental group, individual sensory integration therapy according to principle of ASI was performed for twice a week, 40 minutes, and 16 times for 8 weeks. Methods for the data analysis included Mann Whitney U test, Chi-square test, Wilcoxon's signed rank test, Cohen's d test of SPSS 24.0. Results : In the ASI Intervention group, the sensory processing ability showed statistically significant difference in total score, movement sensitivity, auditory filtering and low energy/weak compared to the control group without ASI intervention (p<.05). In the ASI Intervention group, the motor development showed statistically significant difference in Gross Motor Quotient, Fine Motor Quotient and Total Motor Quotient compared to the control group without ASI intervention (p<.05). Conclusions : In this study, ASI intervention had a positive effect on the sensory processing and motor development in children with Developmental Delay.

• 한국노년학
• /
• v.30 no.3
• /
• pp.871-894
• /
• 2010

Research was undertaken to examine the effectiveness of PST for the depression of Korean Elderly. The program and manual for korean elderly was developed based on PST procedures for depression as outlined by Nezu and D'Zurilla(2007). For the purpose, 150 old people over 65 who resided in chunchun were randomly selected. and screened with PHQ-9. 42 elderly who had depression symptom at middle level, were chosen for study and randomly assigned into experimental group(n=23) and control group(n=19). PST is a six session, manual-based conducted over an 6-week period by trained interviewers in the elderly's home. As a results, CES-D and KGDS of the experimental group have been significantly decreased and total SPSI-R has been significantly increased between pre-and post measures while no statically significant change was found in control group. This results suggest that problem-solving therapy program might decrease the depression and enhance the problem solving ability of the elderly and that PST can be suitable to home visit program with social work perspectives.

• Journal of Hospice and Palliative Care
• /
• v.9 no.2
• /
• pp.86-92
• /
• 2006

Purpose: This study was conducted to develop a measuring tool for spiritual care performance of hospice team members. The tool may be utilized for providing hospice patients with more systematic and standardized spiritual tares. Methods: The concept and questions of the tool were developed, and then its validity and reliability were tested. For the validity and reliability tests, a self-reported questionnaire comprising 33 questions with 4 point scale ($1{\sim}4$), was developed, and the data were collected from 192 hospice team members from December 2005 to February 2006. Results: Thirty three questions, drafted through literature review and professional consultation, were reviewed by 20 professionals for their validity, were revised and supplemented resulted in the final 33 questions. The questions with a correlation coefficient grater than .30 were selected: all the 33 questions were selected based on this criterion. The reliability coefficient, Cronbarh's ${\alpha}$, was 0.95. The 33 questions were analyzed for factors, and six factors were extracted: relationship formation and communication, encouragement and promotion of spiritual growth, linking with spiritual resources, preparation of death, evaluation and quality control for spiritual intervention, Intervention, and spiritual assessment for intervention. Conclusion: The tool developed in this study includes six factors and has high level of reliability. This tool Will greatly contribute to assess and improve hospice care services, providing systematic and standardized spiritual cares for terminally ill patients and their families.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.20 no.2
• /
• pp.75-79
• /
• 2016

Purpose The ASAN Medical Center, Nuclear Medicine performs TSH (Thyroid stimulating hormone) and FT4 (Free Thyroxine) tests 8 times per day. Accordingly, 70 ~ 80 kit tubes are consumed every day for the measurements and the time consumed for reagent dispensing averages over 170 seconds, where the TAT (turnaround time) may be effected when the number of test samples is larger than expected. Therefore, the following test was conducted with the purpose to reduce the number of kit tubes consumed, and reduce the time for reagent dispensing. Materials and Methods The test is based on applying the same reagent for tests where the number of samples is 30 or less. The test for TSH was conducted 9 times from July $1^{st}$ 2015 to July $10^{th}$ 2015. The test for FT4 was conducted 4 times from June $18^{th}$ 2015 to June $22^{nd}$, 2015. Standard Solution No.2 (0.153 uU/mL) and No.5 (4.96 uU/mL) was selected as the two-point standards for the TSH test, and Standard Solution No.3 (0.777 ng/dL) and No.4 (2.044 ng/dL) was selected as the two-point standards for the FT4 test. 38 test samples were subject to correlation analysis. Results For TSH, the result of the normal test shows ranges of 0.20 ~ 0.37 uU/mL for Control1, 0.53 ~ 0.71 uU/mL for Control2, and 6.77 ~ 7.94uU/mL for Control3, while the result of two-point calibration curve test shows ranges of 0.18 ~ 0.27 uU/mL for Control1, 0.53 ~ 0.71 uU/mL for Control2, and 7.30 ~ 8.52 uU/mL for Control3. For FT4, the result of the normal test shows ranges of 0.85 ~ 0.94 ng/dL for Control1 and 4.23 ~ 4.57 ng/dL for Control2, while the result of two-point calibration curve test shows ranges of 0.61 ~ 0.75 ng/dL for Control1 and 3.88 ~ 5.71 ng/dL for Control2. For TSH, the CV% of the normal test for Control1, Control2 and Control3 are 10.5, 3.3 and 3.6 respectively, while the CV% of the two-point calibration curve test for Control1 and Control1 are 12.4, 8.2 and 5.1 respectively. The result shows an outstanding correlation of TSH: y = 0.9985x - 0.0459 $R^2=0.9986$. For FT4, the CV% of the normal test for Control1 and Control2 are 0.70 and 0.71 respectively, while the CV% of the two-point calibration curve test for Control1 and Control1 are 8.7 and 16.2 respectively. The result shows an outstanding correlation of FT4: y = 1.2674x - 0.1133 $R^2=0.9824$. Conclusion The two-point calibration curve can be efficiently applied for TSH in cases where the number of test samples is not large, since the number of samples to be re-tested increases when the result is abnormal from the calibration curve. The two-point calibration curve test should not be applied for FT4 where the results do not consistently comply with the quality assessment range. Depending on how the two-point calibration curve is applied, up to 5 test tubes can be conserved per test, and the reduced time for reagent dispensing is anticipated to have a positive effect on the TAT (turnaround time).