• 한국철도학회논문집
• /
• 제16권5호
• /
• pp.402-409
• /
• 2013

현재 운영되고 있는 광역도시철도 시스템에서는 표정속도의 저하에 따라 평균 출퇴근 시간도 계속 증가하고 있으며 이는 도시철도 이용률의 저하와 타 교통수단 대비 졍쟁력 저하로 이어지게 된다. 따라서 열차의 표정속도를 대폭 향상시킬 수 있는 광역도시철도의 효율적인 급행화 방안이 요구되고 있다. 이번 연구에서는 가감속도와 최고속도 성능을 향상시킨 고성능 전동차 투입을 고려하여 급행과 완행으로 분리 투입시 획득 할 수 있는 시간 단축 효과와 경제성을 기준으로, 광역철도간 급행화 방안들을 제안 및 그 결과를 비교 분석하였다. 또한 대피선 설치를 최소화 할 수 있는 최적의 급행화 방안을 분석결과로 제안하였다.

• 한국재난정보학회 논문집
• /
• 제8권3호
• /
• pp.258-266
• /
• 2012

광역철도사업 추진과 관련하여 분류기준, 지정요건 등이 모호하여 지방정부는 재정지원비율이 높으면서 동시에 운영부담이 없는 국가시행사업으로 요구하게 되는 문제점을 낳았다. 이에 본 연구는 광역철도 사업이 본래의 기능을 충실히 수행할 수 있도록 지정기준을 재정립하였으며, 광역철도 사업의 세부 유형구분, 시행주체, 지정절차 등에 대해서도 규정의 정립을 제안하였다. 인구주택총조사 결과를 이용하여 광역철도의 범위를 정하고, 표정속도를 높여 도시철도와의 차별성을 확보하는 등의 형태로 광역철도 지정요건 개선방안을 마련하였다. 이에 따라 중앙정부의 재정소요를 경감하고 지방정부의 책임성을 높일 것으로 기대된다.

• 한국환경과학회지
• /
• 제10권6호
• /
• pp.407-415
• /
• 2001

A case of air pollution study of estimation of emission rate for source to railroad rolling stock and emissive character about is unusual. Recent emission rate of railroad rolling stock was estimated with emission factor of EPA in three region(Seoul, Incheon, and Gyeonggido). But this EPA factor could be incorrect because Korea and America have a different railroad environment in the variety of fuel and character of railroad rolling stock In this study, emission rate of each line, car and region(district) with omission factor of Korean case(National Railroad Administration, 1997) was estimated. In Busan Metropolitan City, railroad rolling stocks were divided accoding to, each line, car and service. Particularly, the Idle fuel rate omitted in the preceding study was included in calculation fuel rate. Total emission rate of Busan Metropolitan City was 887.41 t/year Each emission rates of Kyeongbu line, Donghaenambu line, Gaya line, Uam line, Bujeon line, and idle was 489.15t, 196.46t, 33.94t, 12.66t, 6.47t, and 48.75t, respectively.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1886-1894
• /
• 2009

The widening national capital area of Korea has caused a traffic jam problem with increasing commuting hours. In addition, as the economic crisis goes on, the people moving to the outside of a city has increased. So we expect that the expansion of this metropolitan area will do grow and it will cause a more severe traffic jam in the near future. Therefore, We will study about 'Rapid Railroad Operation in Metropolitan Area' to solve this problem and improve rail's competitive power as a reasonable transportation method. The Rapid Railroad can sharply reduce commuting hours. Also, it is more eco-friendly transportation than the others. Through many cases revealed in both domestics and overseas, we will solve the problem of a traffic jam getting senous m metropolitan area. After studying successful cases of overseas, rapid railroad, such as France and Japan, we will study domestic cases of Yongsan$\sim$Dong-inchoen, Guro$\sim$Cheonan and Gaehwa$\sim$Sin-nonhyeon, and comparison will do made among these case. In conclusion, The introduction of Rapid Railroad show the effective plan for strengthen the competitiveness and solve the traffic problem.

• 한국실내디자인학회논문집
• /
• 제19권5호
• /
• pp.11-20
• /
• 2010

User-oriented Design is necessary in planning the interior design of Metropolitan Railroads trains, since this is a typical means of transportation in this modem society and all ages people with different body scale use this facility. However, there are little studies about facility panning and zoning of Metropolitan Railroads train considering users. Therefore, in this study, after completing the checklist based on the current legal standards of facility installation of South Korea and Japan, we examined user's facility and suggest several improvement of the opening 14 metropolitan railroad lines in Seoul. Then, we evaluated this facilities according to 41 standards; general facility(24 standards), safety facility(4 standards), guide facility(11 standards), other facility(4 standards). The result of this study may be summarized as follows. 1) General facility has to be designed to obtain lots of room for storage and this facility should be fixed up tightly with secure system. 2) Safety facility should be designed to minimize a difference of floor-level between threshold of train and ground. Also, using various color and material could help passengers to distinguish different space and facility. 3) Guide facility should be designed to guide passengers to the accurate direction with proper sign design in the pathway of Metropolitan railroad train. Also, more various color, which based on the research about physiological and psychological effect, should be used to guide people. 4) Other facility should equip more visual system using common good and informative contents. Through this study, we try to understand the current interior physical condition of Metropolitan Railroads trains. However, for future studies, it is expected to supplement evaluation standards considering aesthetic design, environmental improvement of indoor air quality and the satisfaction and demand of Metropolitan Railroads trains.

• 전기학회논문지
• /
• 제67권1호
• /
• pp.137-141
• /
• 2018

The voltage drop is important in electric railway for feeding a huge power of train on fixed feeding area. Nowadays it is tried to operate a high speed trains on conventional lines and there is problem on the voltage drop too. It is simulated on the conditions increased the turn ratio of trolley, installed autotransformer neutral line with variable taps. In result, it is compensated the voltage drop between ATs and better on last AT, not on the position of AT. And it is decreased a return current and neutral current of AT because of unbalance between trolley and feeder. It should be studied faster and more controllable the solid state switchs instead of the mechanical one in order to utilize this system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1481-1498
• /
• 2007

As railroad industry face the new Renaissance era, effective and efficient maintenance methods for rolling stock operation are required with advanced railroad technology. All kinds of railroad systems such as high speed long distance train, metropolitan mass transit and light rail require systematic maintenance technology in order to maintain the safe railroad operation. Simulation models for detailed operations of the sample maintenance center are developed. In this study, standard maintenance procedures, layout, equipments and number of workers of Siheung Metropolitan Railroad Maintenance Rolling Stock Depot are considered. The proposed simulation models are developed using simulation package ARENA. Three simulation analysis using the developed simulation model are done. First, the bottleneck operation is identified. Second, the relationship between maintenance center size, number of workers and cycle time is analyzed. Lastly, the scheduling performances between PERT/CPM and Critical Chain Project Management(CCPM) are compared.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권1호
• /
• pp.40-46
• /
• 2012

This paper presents contactless power supply systems using the Valtchev model in transportation systems. The major drawback of contactless systems is that the efficiency is lower than that of contact systems. The coupling coefficient of the contactless transformer is the most influential parameter on the system efficiency. Here, a new computer model for the contactless transfer system developed in the Korea Railroad Research Institute is presented. Also, simulations of the old model and the new model are compared with the prototype measurement to assure the model validity.

• 전기학회논문지
• /
• 제67권1호
• /
• pp.61-67
• /
• 2018

Automatic Train Stop (ATS) is a device that automatically stops or decelerates a train when the train exceeds the permitted speed limits or violates the signal regulations. The railway signaling system has been evolved to an automatic train control system (ATC), and is being developed into Distance-to-Go and Communication Based on Train Control (CBTC). In spite of that, the ATS system is currently being operated in Seoul Metro (line 1 and 2) and most of railway lines in Korea as well as overseas. In this study, we presents the technical methodology to prevent human errors in order to secure the safety in operation of the ATS system.

• 전기학회논문지
• /
• 제65권1호
• /
• pp.208-213
• /
• 2016

In order to detect the exact position of high-speed train, it is necessary to obtain location information from the transponder tag installed along the track. When the transponder tag receives the energizing signal from the train, it sends a telegram to the reader, which includes location information. In high-speed railway environment, this telegram can be corrupted by electromagnetic interference caused by onboard electric train power equipments or wayside devices. In order to assess the performance of transponder system under this harsh environment, we carried out field test using HEMU-430X. Field test results are briefly introduced and discussed for the evaluation of the transponder system under development.