• Korean Chemical Engineering Research
• /
• v.57 no.6
• /
• pp.749-757
• /
• 2019

Methyltrimethoxysilane (MTMS) and trimethylethoxysilane (TMES) as starting materials were dissolved in various types of solvents, and hydrolysis with water and polycondensation reaction were carried out using various types of catalysts to prepare non-fluorinated water-repellent coating solutions. The coating solutions were spin-coated on cold-rolled steel sheets, and thermally cured to prepare water-repellent coating films. The effect of types of catalysts and solvents on the water repellency of the resulting coating films was investigated during this process. When hydrochloric acid and nitric acid, which are strong acids, were used as catalysts, the solutions showed a white opaque state due to the aggregation of siloxane polymers. On the other hand, when acetic acid, phosphoric acid, and oxalic acid, which are weak acids, were used, they were in a stable and transparent state without precipitation. As a result, the contact angles of the coated films, prepared from hydrochloric acid and nitric acid, were $58^{\circ}$ and $92^{\circ}$, respectively, showing low water repellency. On the other hand, when acetic acid, phosphoric acid, and oxalic acid were used, the contact angles of the coated films were $101^{\circ}$, $103^{\circ}$ and $116^{\circ}$, respectively, showing high water repellency. In addition, when isopropanol and ethanol were used as solvents, phase separation occurred in the solutions due to the aggregation of siloxane polymers. On the other hand, when methanol, ethyl acetate, and methyl ethyl ketone were used as solvents, the solutions were transparent and showed a stable state without sedimentation.

• Polymer(Korea)
• /
• v.32 no.4
• /
• pp.377-384
• /
• 2008

In this study, the microsphere silicone polymer beads were synthesized by UV irradiation and alkoxy hydrolysis. The coefficient of variation (CV) of microsphere silicone polymer beads were decreased with increasing UV intensity, reaction time. The mean particle diameter, refractive index, and pH value were $4.1{\mu}m$, 1.43 and 7.5, respectively. Also, the true and bulk specific gravity, moisture content were 1.30, and 0.40, below 2%. The mean particle diameter and CV were the lowest at 0.1 wt% hexamethyldisilazane (HMDS) and their roundnesses were $0.95{\sim}0.98{\mu}m$ values. The particle dispersion index of microsphere silicone polymer beads was 4.92 at 450 W, 90 min and the yield was increased to 11.3% at 20 wt% methyltrimethoxysilane (MTMS). The mean particle diameter was decreased with increasing the stirring rate and reaction temperature.

• Polymer(Korea)
• /
• v.39 no.3
• /
• pp.499-505
• /
• 2015

Polyorganosiloxane having controlled cross-linking density and phenyl group content were prepared by dimethyldimethoxysilane (DMDMS), methyltrimethoxysilane (MTMS) and phenyltrimethoxysilane (PTMS). The effect of cross-linking density and phenyl group content on the physical properties of siloxane resin and its coated film have been invetigated. Si-NMR results confirmed that synthesized siloxane resins have equivalent D $T^{Me}$ $T^{Ph}$ structures according to applied mole ratios of DMDMS, MTMS and PTMS. Polyorganosiloxane having higher cross-linking density with high phenyl content showed the high molecular weight and increasing phenyl content resulted in higher refractive index as well as better thermal stability. Cross-linking density is more important factor than phenyl content to obtain higher pencil hardness of coated film on the glass. Our results concluded that even polyorganosiloxanes having similar siloxane structures show different physical properties as function of cross-linking density and phenyl content in polyorganosiloxane.

• Korean Chemical Engineering Research
• /
• v.56 no.3
• /
• pp.327-334
• /
• 2018

Water-repellent coating solutions were prepared by sol-gel method using tetraethoxysilane (TEOS) and methyltrimethoxysilane (MTMS) as precursors. The solutions were spin-coated on a cold-rolled steel sheet and thermally cured to prepare a non-fluorine water-repellent coating films. The effects of molar ratios of MTMS/TEOS, water concentration and ammonia concentration on the hydrophobic properties of the coating films were studied. The contact angle of water on coating films prepared by varying the molar ratio of MTMS/TEOS to 1~20 showed a maximum value of $108^{\circ}$ when the MTMS/TEOS molar ratio was 10. With increasing water content, the coating films showed the larger contact angles and the better the water repellency. As the amount of ammonia added was increased, the contact angles of coating films were increased, showing the better the water repellency. It is considered that the larger the amount of ammonia added, the larger the size of the silica particles generated, which increases the surface roughness of the silica particles, thereby increasing the water repellency.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.4
• /
• pp.409-414
• /
• 2019

Silica and polymethylsilsesquioxane (PMSQ) are silicone powders widely used as cosmetics. We synthesized silica-PMSQ composites via sol-gel method using tetraethoxysilane (TEOS) and methyltrimethoxysilane (MTMS) as precursors of silica and PMSQ, respectively. Shape of the composites was controlled by varying the ratios of TEOS and MTMS, which were used as silane monomers. Silica-PMSQ composites showed three different shapes, which were sphere-shape, raspberry- shape, and donut- shape. All of them had soft touch, easy water dispersion, and soft focus effect in common. However, each shape showed some differences in sense of use, adhesion, and strength of the soft focus effect. Raspberry-shape composite had the strongest soft focus effect, donut-shape one had the strongest adhesion, and sphere-shape one had the best in softness. Thus, it is concluded that by varying the ratios of TEOS and MTMS silica-PMSQ composites could be easily synthesized into different shapes, providing various functions. This method can be applied to manufacture functional cosmetics.

• Korean Chemical Engineering Research
• /
• v.44 no.4
• /
• pp.417-423
• /
• 2006

A series of amine functionalized MCM-41 catalysts were prepared by aminopropyltrimethoxysilane grafting and their catalytic performance in Knoevenagel reaction of selected substrates was investigated. Water resistant and catalytically active amine grafted MCM-41 was prepared by post-synthetic silylation using methyltrimethoxysilane ; hydrogen bonding of the water molecules formed during the condensation reaction to the active N group was suppressed, which led to high TON of the reaction. Amine functionalized MCM-41 prepared by coating method produced high conversion, but the TON of the catalyst was much lower than that of the amine grafted MCM-41; pore volume of the functionalized MCM-41 decreased substantially and large portion of the immobilized amine is believed to be hydrogen bonded to each other, which can result in decrease in the basicity of the N group. A secondary amine group was prepared by room temperature condensation between aminopropylsilane and chloropropylsilane, and the MCM-41 grafted with the secondary amine group demonstrated the highest catalytic activity among the catalysts prepared.

• Membrane Journal
• /
• v.24 no.6
• /
• pp.491-497
• /
• 2014

PTMSP-silica composite membranes were prepared by addition of 0, 15, 20, and 30 wt% TEOS (tetraethoxysilane), TMOS (tetramethoxysilane), MTMOS (methyltrimethoxysilane), and PTMOS (phenyltrimethoxysilane) contents to PTMSP using sol-gel process. The gas permeability of the composite membranes for $H_2$, $N_2$ and ideal selectivity for $H_2$ over $N_2$ were investigated as a function of alkoxysilane content. The permeabilities for $H_2$ and $N_2$ increased in the range of alkoxysilane contents 0~20 wt%, however decrease the range of 20~30 wt%. The ideal selectivities for $H_2$ over $N_2$ decreased in the range of TEOS and PTMOS contents 0~15 wt%, but increased in the range of 15~30 wt%. When compared to the upper bound of Robeson, PTMSP-silica composite membranes with TEOS content of 30 wt%, MTMOS content of 20 wt% and PTMOS content of 30 wt% turned out to be a simultaneous improvement in ideal selectivity and permeability.

• Proceedings of the KAIS Fall Conference
• /
• 2006.05a
• /
• pp.587-592
• /
• 2006

코팅은 플라스틱의 표면의 물성과 렌즈의 광학적 성능을 높이기 위해 필요하다. Allyl diglycol carbonate계열 렌즈 표면의 물성과 광학적 성능을 개선하기 위하여 3-glycidoxypropyltrimethoxysilane(GPTS), methyltrimethoxysilane(MTMS) 및 tetraethyl orthosilicate(TEOS)의 몰 비를 변화시켜 유-무기 하이브리드 재료로 사용하였다. Sol-gel 공정에 의한 flow코팅하여, $140^{\circ}C$에서 4시간 경화하였다. 코팅 렌즈는 투과율, 부착력, 연필경도, 내마모성, 내온수성 및 내약품성을 평가하였고 GPTS, MTMS 및 TEOS의 몰비가 각각 1: 1: 2일 때 가장 우수한 것으로 나타났다.

• Journal of Integrative Natural Science
• /
• v.3 no.1
• /
• pp.7-18
• /
• 2010

Ethylene-bridged silsesquioxane resins were synthesized from two monomers: 1,2-bis(trimethoxysilyl)ethane and methyltrimethoxysilane. The silsesquioxane thin films were spin-coated from the copolymerized resins on silicon wafer. Metal insulator metal (MIM), metal insulator semiconductor (MIS) devices were utilized to investigate the electrical properties of the copolymerized thin films. As the films were inserted as gate insulator in the OTFT devices, the field effect mobilitites were evaluated by employing Poly(3-hexylthiophene) (P3HT) as organic semiconductor, which shows that their dielectric properties and mobility values are dependent on the molecular structures and Si-OH concentration involving in the films.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.551-552
• /
• 2007

Coating films were prepared from silane-terminated Colloidal silaca(CS) and UV-curable acrylate resin. The silane-terminated CSs were synthesized from CS and methyltrimethoxysilane(MTMS) and then treated with 3-methacryloxypropyltrimethoxysilane(MAPTMS)/3-glycidoxypropyltrimethoxysilane( GPTMS)/vinyltrimethoxysilane(VTMS) by sol-gel process, respectively. The silane-terminated CS and acrylate resin were hybridized using UV-curing system. Thin films of hybrid material were prepared using spin coater on the glass. Their hardness, contact angle and transmittance improved with the addition of silane-terminated CS.