• 공업화학
• /
• 제24권2호
• /
• pp.171-176
• /
• 2013

지구온난화 문제가 대두되면서 volatile organic compound (VOC) free 도료의 필요성이 크게 증가하고 있다. 현재 국내외적으로 사용되고 있는 도료의 약 70~80% 정도가 용매형 도료이다. 따라서 지구온난화 문제의 근본적인 해결을 위해서는 도료의 희석제로 사용되고 있는 용매인 휘발성 유기화합물(VOCs)의 배출을 최소화 할 수 있는 무용제형도료의 개발이 필수적이다. 본 연구에서는 무용제도료를 개발하기 위하여 기존의 페놀수지의 특성인 산성화로 인해 도료로 사용 시 부착성이 떨어지는 단점을 보완하기 위해 아크릴계 단량체들을 첨가하였다. 합성한 페놀수지와 PF/PMMA 블렌드 수지와 PF/PHEMA 블렌드 수지의 구조분석결과 블렌드된 형태를 확인하였고 접착인장강도실험을 통해 PF/PMMA 블렌드 수지가 2.818 Mpa의 값으로 도료시스템에 적용 가능성을 확인하였다.

• 전기화학회지
• /
• 제11권2호
• /
• pp.125-129
• /
• 2008

리튬이온폴리머전지는 휴대용 전자기기와 전기자동차 등의 차세대 동력원으로 주목을 받고 있다. 본 연구에서는 폴리에틸렌 분리막에 소량의 부기 화합물과 고분자를 코팅하여 제조된 표면 개질 분리막을 리튬이온폴리머전지에 적용함으로써 전지 특성을 향상시키고자 하였다. 불화 알루미늄과 아크릴로니트릴-메틸 메타크릴레이트 공중합체를 폴리에틸렌 지지체에 코팅하여 얻어진 표면 개질 분리막을 이용하여 제조된 리튬이온폴리머전지는 충 방전 싸이클 과정 중에 균일한 전도성 고체 전해질 계면이 전극 표면에 형성되어 낮은 계면 저항값을 보였으며, 이에 따라 불화 알루미늄을 포함하고 있지 않는 리튬이온폴리머전지와 비교하여 싸이클 특성과 고율 방전 특성이 크게 향상되었다. 표면 개질된 분리막을 이용하여 제조된 리튬이온폴리머전지를 0.5 C rate로 충 방전한 결과, 초기 방전용량 150 mAh/g을 나타내었으며, 300싸이클에서 133 mAh/g의 방전 용량을 유지하여 우수한 용량 보존특성을 나타내었다.

• 한국기계가공학회지
• /
• 제17권3호
• /
• pp.51-58
• /
• 2018

In this paper, the organic material Poly(methyl methacrylate) PMMA is used with inorganic $Al_2O_3$ to fabricate organic-inorganic multilayer barrier thin films. The organic thin films are developed using a roll-to-roll electrohydrodynamic atomization system, whereas the inorganic are grown using a roll-to-roll low-temperature atmospheric pressure atomic layer deposition system. For the first time, these two technologies are used together to develop organic-inorganic multilayer barrier thin films in atmospheric condition. The films are grown under optimized parameters and classified into three classes based on the layer structures, when the total thickness of the barrier is maintained at ~ 160 nm. All classes of barriers show good morphological, optical and chemical properties. The $Al_2O_3$ films with a low average arithmetic roughness of 1.58 nm conceal the non-uniformity and irregularities in PMMA thin films with a roughness of 5.20 nm. All classes of barriers show a notably good optical transmission of ~ 85 %. The hybrid organic-inorganic barriers show water vapor and oxygen permeation in the range of ${\sim}3.2{\times}10^{-2}g/m^2/day$ and $0.015cc/m^2/day$ at $23^{\circ}C$ and 100% relative humidity. It has been confirmed that it can be mass-produced and used as a low-cost barrier thin film in various printing electronic devices.

• 분석과학
• /
• 제30권2호
• /
• pp.75-81
• /
• 2017

5-methylthioninhydrin (5-MTN) is an amino acid sensitive reagent used for the development of latent fingermarks deposited on porous surfaces such as paper and wood. The present study demonstrates that the 5-MTN can be used as a latent footwear impression enhancement reagent, by reacting with trace multivalent metal ions, which are the main components of the latent footwear impression. 5-MTN and L-alanine complex (MTN-ALA) used for the latent footwear impression development was prepared, by mixing $4.5{\times}10^{-3}M$ 5-MTN (in methanol) and $4.5{\times}10^{-3}M$ L-alanine (in methanol) in 1:1 ratio, and keeping undisturbed at room temperature for 24 h. The latent footwear impressions were deposited on white and black non-porous surfaces (glass plate, polyethylene panel, polypropylene panel, acryl panel, polyvinyl chloride (PVC) panel, poly(methyl methacrylate) (PMMA) panel, acrylonitrile-butadiene-styrene (ABS) panel, tile), and a semi-porous surfaces (painted wood). The latent footwear impressions on these surfaces were treated with MTN-ALA complex by spraying. The fluorescence of footwear impressions (occurred due to the reaction between MTN-ALA and metal complexes) was observed under a 505 nm forensic light source and an orange barrier filter. The enhancement of latent footwear impression was achieved from black surfaces without any blurring. However, the fluorescence (enhancement) of footwear impression was not observed on the white PVC, PMMA, and ABS surfaces, because the incident light interfered and reflected on the surface. The sensitivity of MTN-ALA was superior to 2,2'-dipyridil, which is a representative non-fluorescing footwear impression enhancement reagent, and similar to 8-hydroxyquinoline, which is a representative fluorescing footwear impression enhancement reagent.

• Macromolecular Research
• /
• 제13권2호
• /
• pp.120-127
• /
• 2005

Conventional poly(methyl methacrylate) (PMMA) bone cement has been widely used as an useful biopolymeric material to fix bone using artificial prostheses. However, many patients had to be reoperated, due to the poor mechanical and thermal properties of conventional PMMA bone cement, which are derived from the presence of unreacted MMA liquid, the shrinkage and bubble formation that occur during the curing process of the bone cement, and the high curing temperature ($above 100^{\circ}C$) which has to be used. In the present study, a composite PMMA bone cement was prepared by impregnating conventional PMMA bone cement with ultra high molecular weight polyethylene (UHMWPE) powder, in order to improve its mechanical and thermal properties. The UHMWPE powder has poor adhesion with other biopolymeric materials due to the inertness of the powder surface. Therefore, the surface of the UHMWPE powder was modified with two kinds of silane coupling agent containing amino groups (3-amino propyltriethoxysilane ($TSL 8331^{R}$) and N-(2-aminoethyl)-3-(amino propyltrimethoxysilane) ($TSL 8340^{R}$)), in order to improve its bonding strength with the conventional PMMA bone cement. The tensile strengths of the composite PMMA bone cements containing $3 wt\%$ of the UHMWPE powder surface-modified with various ratios of $TSL 8331^{R}$ and $TSL 8340^{R}$ were similar or a little higher than that of the conventional PMMA bone cement. However, no significant difference in the tensile strengths between the conventional PMMA bone cement and the composite PMMA bone cements could be found. However, the curing temperatures of the composite PMMA bone cements were significantly decreased.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.300-300
• /
• 2006

Nondestructive nanostructural analysis is indispensable in the development of nano-materials and nano-fabrication processes for use in nanotechnology applications. In this paper, we demonstrate for the first time a quantitative, nondestructive analysis of nanostructured thin films supported on substrates and their templated nanopores by using grazing incidence X-ray scattering and data analysis with a derived scattering theory. Our analysis disclosed that vertically oriented nanodomain cylinders had formed in 20-100 nm thick films supported on substrates consisting of a mixture of poly(styrene-b-methyl methacrylate) (PS-b-PMMA) and PMMA homopolymer, and that the PMMA nanodomains were selectively etched out by ultraviolet light exposure and a subsequent rinse with acetic acid, resulting in a structure consisting of hexagonally packed cylindrical nanopores.

• 폴리머
• /
• 제31권6호
• /
• pp.538-542
• /
• 2007

도로포장용 아스팔트의 성능을 개선하기 위하여 유화중합법으로 여러 가지 조성의 반응성 고분자 개질제들을 합성하여 아스팔트와 혼합 후 성능을 시험 분석하였다. 합성된 고분자 개질제들을 아스팔트와 혼합 후 시차주사열량계(DSC)로 아스팔트의 열적 특성 변화를 측정하였고, 형광현미경으로 개질제들의 아스팔트에 대한 분산 상태를 확인하였다. 또한 각각의 개질제들을 아스팔트에 대하여 2% 혼합하여 침입도를 측정하였으며, 개질 아스팔트의 동적 안정도와 영구 변형 속도를 측정하기 위하여 개질제 각각을 아스팔트에 대하여 1%씩 혼합하여 wheel tracking 실험을 수행하였고, 그 중 가장 성능이 좋은 개질제 6번을 1.0, 1.5, 2.0% 혼합 후 wheel tracking 실험을 실시하였다. 이러한 침입도와 wheel tracking 실험에서 6번 개질제가 가장 좋은 성능을 나타내었으며, 이는 개질제의 MMA 부분이 styrene 부분보다 개질제의 성능 향상에 더 많은 기여를 하는 것으로 판단된다.

• 폴리머
• /
• 제34권1호
• /
• pp.14-19
• /
• 2010

여러 원인에 의한 석조문화재의 풍화 손상을 저지할 목적으로 아크릴계 고분자를 이용하는 가압함침 보존 처리방법에서 함침된 고분자와 무기물질인 석재와의 친화성을 높이도록 silane계 아크릴 단량체의 사용을 연구하였다. 기본 단량체인 methyl metacrylate(MMA)에 vinyl trimethoxy silane(VTMS)의 함량을 변화시키고 라디칼 중합으로 MMA-VTMS 공중합체를 얻어 이들 공중합체의 유리전이온도, 평균분자량, 그리고 저장탄성률의 변화를 평가하여 benzoyl peroxide (BPO) 1 wt%, 중합시간 8시간, 그리고 VTMS 5 mol% 혼합의 경우(PMV5)가 최적 혼합비율과 중합조건임을 알 수 있었다. 실제 국내산 화강암과 풍화된 암석의 시편을 함침 보존처리한 후 수분 흡수율, 충격특성, 내산성 및 접착특성 등을 측정한 결과 MMA 단독 사용과 비교하여 PMV5의 경우 모든 특성에 있어서 개선되는 것을 확인하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제48권3호
• /
• pp.315-325
• /
• 2020

Boron compound had many advantages as wood preservative, but it was prone to leaching. Improving boron preservation was required to extend the service life of fast growing and low durability red jabon (Antochephalus macrophyllus) hardwood. This study aimed to evaluate the dimensional stability, color change and durability of modified red jabon wood by double impregnation with boron and methyl methacrylate (MMA) and heat treatment. Impregnation I used boric acid or borax, and impregnation II used MMA, while heat treatment used temperatures of 90 ℃ or 180 ℃ for 4 hours. The dimensional stability, leachability, water absorption, color change and decay resistance of modified red jabon wood were tested. The results showed that MMA impregnation increased the dimensional stability of red jabon wood, while the leaching and water absorption in the wood significantly reduced. Heating at 180 ℃ caused less water absorption and higher dimensional stability of the wood than that of heating at 90 ℃. Impregnation with boric acid and MMA followed by heating at 90 ℃ resulted in the highest wood ASE, 89.9%. The color change (∆E^*) of wood increased significantly after MMA impregnation and heating at 180 ℃. Boric acid impregnation caused more resistant wood than borax impregnation against decay fungi and termites. Impregnation with boric acid and MMA followed with heating at 180 ℃ increased significantly the wood resistance against decay fungi and termites.

• Current Optics and Photonics
• /
• 제4권2호
• /
• pp.95-102
• /
• 2020

The impact of graphene and poly(methyl methacrylate) (PMMA) substrates on the response of a fiber Bragg grating (FBG) due to mechanical deflection was investigated. For this purpose, four FBGs with grating lengths of 5, 15, 25, and 35.9 mm were utilized. Higher sensitivity was found for FBGs of larger grating length and for those bonded to graphene substrate. It was concluded that FBGs of smaller grating length (5 and 15 mm) were more sensitive in compression mode, while those of larger grating length (25 and 35.9 mm) were seen to be highly sensitive in tension mode.