• Journal of Dairy Science and Biotechnology
• /
• 제31권1호
• /
• pp.59-65
• /
• 2013

Antibiotic residues are undesirable in milk and milk products for a number of reasons. In particular, they can have harmful effects on public health and harm to the manufacturer of the cultured milk products, e.g. MRSA etc. Although government regulatory agencies and the dairy industry have been successful in decreasing the presence of high concentrations of antibiotic residues, violations still occur and lead to contaminated products. As a result, several rapid and reliable methods for the detection of antibiotic residues have been developed, including microbiological and instrumental analysis methods. The conventional methods are time consuming, but recent improvements have allowed for better detection time, sensitivity, and accuracy. An example of an advanced detection instrument is the biosensor, which has several applications in food and environmental science, e.g. food-born pathogen detection, antimicrobial residues etc. In the present review, the recent trends in the methods used to test for antibiotic residues in milk and dairy products, as well as their specific applications, have been discussed.

• 분석과학
• /
• 제8권4호
• /
• pp.739-744
• /
• 1995

The two main methods to prepare water samples for analyzing volatile organic compounds(VOC's) were investigated. One is the purge and trap(PT) method and another is the head space(HS) sampling method. Both methods were effective to transfer the low boiling point components from the water sample onto the capillary column. The cryo-focusing at the top of the main capillary column was an effective way to obtain the sharpness of the chromatographic peaks but could be avoided when a semi-wide bore column was used. The recovery from the same amount of the sample was better in PT than in HS but a larger sample volume in HS method could compensate the lower efficiency. Therefore PT is suitable to the analysis of drinking water where the very low concentration must be determined. HS is suitable to waste water analysis because of the easiness of the operation. The repeatability was good and similar in both methods. For the contamination of the former sample, both methods were tough and could be used without any problems. The matrix effect which could change the equilibrium parameters in HS method was find negligible in many components. The actual samples such as tap water and river water were analyzed with both methods concerning 16 components regulated in Korea.

• 분석과학
• /
• 제15권1호
• /
• pp.72-79
• /
• 2002

Di-(2-ethylhexyl)phthalate (DEHP) 가 가소제로 첨가되 있는 poly(vinylchloride) (PVC) 제품의 사용중에는 DEHP가 방출되어 나올 가능성이 있다. 이때 추출되는 DEHP의 정량적인 측정법에는 여러가지가 있으나 그 방법에 따라 용출량에 많은 차이가 발생하기 때문에 측정방법과 결과에 대한 비교분석은 시급한 과제라 할 수 있다. 이를 평가하기 위하여 PVC를 주원료로 하는 혈액백과 수액백에서의 DEHP 용출에 관한 연구를 기체 크로마토그래프와 분광광도계를 이용한 두 가지 방법으로 수행하였다. 5종류의 PVC 백을 실험 재료로 선택하여 $40{\times}10{\times}0.4mm$ 크기의 시편을 제조하고 이를 용출액에 담가 1시간동안 DEHP를 용출하였다. 기체 크로마토그래프로 DEHP 를 검출한 결과 시료에 따라 $23.2{\sim}70.9{\mu}g/mL$ 의 DEHP가 용출되는 것을 알 수 있었다. 반면 PVC백 안에 용출액을 주입하여 1시간 동안 DEHP를 용출시키고 분광 광도계를 이용하여 DEHP를 검출한 결과 $24.8{\sim}41.3{\mu}g/mL$의 DEHP가 용출되었다. 용출 조건과 실험방법에 따라 서로 다른 수치를 보임을 알 수 있었고 단위 시간 단위 면적 당 용출되는 DEHP의 양은 일정하다는 전제 하에 두 실험의 결과를 비교하고 환산하는 식을 구하여 적용한 결과 두 측정방법에서 얻어진 용출량이 거의 일치하였다.

• Environmental Analysis Health and Toxicology
• /
• 제29권
• /
• pp.16.1-16.9
• /
• 2014

Objectives Rapid increase in engineered nanoparticles (ENPs) in many goods has raised significant concern about their environmental safety. Proper methodologies are therefore needed to conduct toxicity and exposure assessment of nanoparticles in the environment. This study reviews several analytical techniques for nanoparticles and summarizes their principles, advantages and disadvantages, reviews the state of the art, and offers the perspectives of nanometrology in relation to ENP studies. Methods Nanometrology is divided into five techniques with regard to the instrumental principle: microscopy, light scattering, spectroscopy, separation, and single particle inductively coupled plasma-mass spectrometry. Results Each analytical method has its own drawbacks, such as detection limit, ability to quantify or qualify ENPs, and matrix effects. More than two different analytical methods should be used to better characterize ENPs. Conclusions In characterizing ENPs, the researchers should understand the nanometrology and its demerits, as well as its merits, to properly interpret their experimental results. Challenges lie in the nanometrology and pretreatment of ENPs from various matrices; in the extraction without dissolution or aggregation, and concentration of ENPs to satisfy the instrumental detection limit.

• 분석과학
• /
• 제13권3호
• /
• pp.277-281
• /
• 2000

16종의 휘발성 유기화합물을 blank water에 첨가하고 고정상으로 $100{\mu}m$ polydimethyl siloxane을 입힌 solid phase microextraction(SPME) fiber를 사용하는 headspace SPME방법으로 추출하여 gas chromatography/mass spectrometry (GC/MS)로 분석하였다. 이 방법의 평균회수율은 97%, 평균상대표준편차는 4.7%, 그리고 검출한계는 $0.01-0.5{\mu}g/l$를 나타냈다. 즉 SPME 방법을 이용한 수용액 중의 휘발성 유기화합물의 결과는 현재 많이 사용되고 있는 기존의 다른 방법보다 우수하고 편리한 방법으로 나타났다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.198-207
• /
• 2010

Many methods and techniques have been developed to obtain the accurate design parameters in soft soils. In particular, several researchers suggest the techniques to get the void ratio for understanding the soil behavior. The objective of this paper verifies the accuracy of the proposed analytical solution for determining the void ratio based on the elastic wave velocities. The paper covers the theories of Wood, Biot, Gassmann and Foti proposed chronological order. The total theory represents the wave propagation in fully saturated medium. To verify the proposed analytical solution, the laboratory and field tests are carried out. After measuring the elastic wave, the void ratios are assessed using proposed equation. The volume based void ratios are also obtained for comparing with the estimated value by several equations. The values estimated by volume, Gassmann and Biot are show good similarity. However, the void ratios based on Wood and Foti methods have a slightly different trend. This study suggests that the theories of Biot and Gassmann may be a useful equation for assessing the void ratio using elastic wave velocities in the field.

• Advances in concrete construction
• /
• 제1권4호
• /
• pp.319-340
• /
• 2013

This paper presents a comparative study on the double-K fracture parameters of concrete obtained using four existing analytical methods such as Gauss-Chebyshev integral method, simplified Green's function method, weight function method and simplified equivalent cohesive force method. Two specimen geometries: three point bend test and compact tension specimen for sizes 100-500 mm at initial notch length to depth ratios 0.25 and 0.4 are used for the comparative study. The required input parameters for determining the double-K fracture parameters are derived from the developed fictitious crack model. It is found that the cohesive toughness and initial cracking toughness determined using weight function method and simplified equivalent cohesive force method agree well with those obtained using Gauss-Chebyshev integral method whereas these fracture parameters determined using simplified Green's function method deviates more than by 11% and 20% respectively as compared with those obtained using Gauss-Chebyshev integral method. It is also shown that all the fracture parameters related with double-K model are size dependent.

• 분석과학
• /
• 제25권4호
• /
• pp.214-222
• /
• 2012

ASTM (American Society for Testing and Materials) D6751-10은 바이오디젤의 품질 규격 뿐 아니라 분석방법 또한 제시하고 있다. 하지만 ASTM 표준에 따른 바이오디젤 및 포함된 여러 불순물의 품질 분석은 경제적, 시간적으로 부담이 크다. 본 연구는 적외선 분광분석법(infrared spectroscopy)과 다변량 통계분석법 중 하나인 PLS (partial least square method)를 이용하여 1회 측정만으로 바이오 디젤 및 불순물들의 농도를 분석하는 시스템을 개발하고자 하였다. 특히, 적외선을 이용한 분석에서 생기는 각 물질의 스펙트럼에 대한 산란 보정, 노이즈 감소 등을 위해 SNV, MSC, OSC, Savitzky-Golay 등의 4가지 전처리 방법의 성능을 비교하였다. 품질 분석에 필요한 바이오 디젤 검량 모델을 PLS로 모델링 결과, Savitzky-Golay 전처리를 하였을 때 정확도가 가장 우수함을 알았다.

• 한국대기환경학회지
• /
• 제27권4호
• /
• pp.436-442
• /
• 2011

In this study, the Total Volatile Organic Compounds (TVOC) emitted from wood-based panels were compared by two analytical methods using the GC/FID and the GC/MS. Japanese Larch, Yellow Poplar, Particle Board (PB) and Medium Density Fiberboard (MDF) were selected as target materials. Major compounds emitted from the panels were Toluene, ${\alpha}$-pinene, ${\beta}$-pinene and limonene. In case of TVOC using GC/FID method, MDF E2 (1,497 ${\mu}g/m^3$) revealed the highest concentration among all wood-based panels, while Japanese Larch (1,772 ${\mu}g/m^3$) showed the highest value with respect to GC/MS method. Furthermore, it was found that the amount of VOC emitted from panels was different depending upon analytical methods. This significant difference was attributed to analytical sensitivities of GC/FID and GC/MS for various VOC. Besides, it was found that the composition ratios of main VOC compounds were not significantly different.

• 분석과학
• /
• 제7권4호
• /
• pp.441-453
• /
• 1994

수질에서 유해물질을 농축하는 방법으로 액체 추출법과 고체상 추출법을 GC/MS를 검출기로 사용하여 비교하였다. 비휘발성 유해물질 중 11종의 산과 44종의 염기/중성 화합물들을 reagent water에 첨가하여 분석한 결과, 액체추출법은 54종의 화합물에 대해 91%의 평균회수율과 4.6%의 평균상대표준편차를 나타내었으며, 고체상 추출법은 52종의 화합물에 대해 63%의 평균회수율과 8.9%의 평균상대표준편차를 보였다. 두 방법의 검출한계는 $1{\sim}5{\mu}g/l$였다.