• 펄프종이기술
• /
• 제38권4호
• /
• pp.24-30
• /
• 2006

Formation which is an indicator of nonuniformity in fiber distribution is concerned with small scale variation in roughness, optical properties, print density, and so on. This study evaluated the formation of sheets which were made usning handsheet former and paper-machine with hydraulic headbox. Optical method and ${\beta}-ray$ method were used for formation test. The fiber type, freeness and basis weight of sheet were considered as variables. The formation of handsheet was affected by fiber type and freeness, and floe size distribution was influenced by basis weight. For machine made sheet, its formation seemed to be dependent on the hydraulic forces in headbox and former. When two formation test methods were compared, there was the highest relationship between optical formation index and normalized standard deviation from ${\beta}-ray$ method.

• International Journal of Safety
• /
• 제9권1호
• /
• pp.43-46
• /
• 2010

In the recycle process of organic solvent, the atmospheric oxygen can cause autoxidation and product peroxide. The time-saving method to evaluate the hazards has been required. In this study, oxygen pressure monitoring experiment was proposed as a new method to evaluate autoxidative resistances of solvents. Some of organic solvents were pressurized by oxygen and kept under isothermal condition. At the same time, the pressure in the vessel tracked. Iodometrical titration, thermal analysis and spectroscopic analysis were performed to measure peroxide concentration, the heat of reaction and chemical bonding change. From the results that THF has larger oxygen consumption rate than CPME, it is considered that autoxidative resistance of THF is lower than that of CPME. This method enables to obtain results in shorter time than other methods. These experimental results were consistent with the previous research with longer test durations [1-2].

• 분석과학
• /
• 제8권4호
• /
• pp.771-778
• /
• 1995

The authors have developed an analytical method for determining trace amounts of 285 kinds of chemicals in natural waters by GC-ion trap MS. The results of overall recovery tests at $0.1{\mu}g/l$ showed that the mean recovery was 92.1% and the mean relative standard deviation was 10.8%. The mean of the method detection limits was $0.036{\mu}g/l$. From the results of analysis of real samples, it was confirmed that this method is useful to elucidate the concentration levels and the fate of chemicals in the aquatic environment.

• Progress in Superconductivity
• /
• 제3권1호
• /
• pp.60-64
• /
• 2001

We have studied properties of step-edge Junction prepared with crystal orientation of sapphire substrate. The Step on sapphire substrates fabricated by conventional photolithography method and Ar ion milling method. $CeO_2$ buffer layer and in-situ YBCO thin film were deposited on the stepped sapphire substrates by a pulsed laser deposition method with the predetermined optimized condition. The step angle was centre fled low angle of about $25^{\circ}$. The YBCO film thickness was varied to obtain various thickness ratios of the film to the step height in a range from 0.7 to 1.2. I-V curves of junction were showed RSJ-behavior, double junction structure, and hysteresis due to the crystal orientation of substrate.

• Bulletin of the Korean Chemical Society
• /
• 제35권7호
• /
• pp.1933-1938
• /
• 2014

Despite increasing importance of in vitro cell-based assays for the assessment of nanoparticles (NPs) cytotoxicity, their suitability for the assessment of NPs toxicity is still in doubt. Here, limitations of widely used cell viability assay protocol (i.e., MTT asssay) for the cytotoxicity assessment of P25 $TiO_2$ NPs were carefully examined and an alternative toxicity assessment method to overcome these limitations was proposed, where the artifacts caused by extracellularly formed formazan and light scattered by agglomerated NPs were minimized by measuring only the intracellular formazan via image cytometric methods.

• Bulletin of the Korean Chemical Society
• /
• 제31권11호
• /
• pp.3395-3398
• /
• 2010

• 한국통신학회논문지
• /
• 제36권1A호
• /
• pp.49-57
• /
• 2011

Random access method for Wibro system is proposed using the Bayesian Technique, which can estimate the number of bandwidth request messages in a frame only based on the number of successful slots. The performance measures such as the maximum average throughput, the mean delay time and the collision ratio are investigated to evaluate the performance of the proposed method. The proposed method shows better performance than the binary exponential backoff algorithm used currently.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1987년도 춘계학술발표회 논문집
• /
• pp.184-187
• /
• 1987

The method of Conjugate Gradient(C.G.M) is applied to the solution of current distribution from body of revolution (B.O.R).Using the C.G.M it is possible to analyze electrically large arbtrarily oriented B.O.R. The fundamental differences between C.G.M and moment method are outlined. This method converges for any initial guess and this techniqe gurantees a monotonic convergence. Numerical results are presented for electromagnetic case which show good agreement with moment solution.

• 한국통신학회논문지
• /
• 제25권10B호
• /
• pp.1769-1776
• /
• 2000

In this paper a new method is proposed to identify a modulation method in the case of unknown digitally modulated input signals. The proposed identification method is implemented with an artificial neural network which is based on characteristic feature extracted from the instantaneous amplitude the instantaneous phase and the instantaneous frequency of the input signals. The proposed method was simulated with 9 type signals (ASK2, FSK2, FSK4, PSK2, PSK4, PSK8, QAM8, QAM16) in a noisy communication environment. The results show that the artificial neural network can accurately recognize all kinds of patterns.

• 한국통신학회논문지
• /
• 제26권11A호
• /
• pp.1963-1970
• /
• 2001

It is essential design process to analyze processing method and set out top level HW configuration using main parameters before implementation of the SAR processor. This paper identifies the impact of the I/O and algorithm structure upon the parallel processing to be assessed and suggests the practical mapping method fur parallel processing to the SAR data. Also, simulation is performed to the E-SAR processor to examine the usefulness of the method, and the results are analyzed and discussed.