• 제목/요약/키워드: methanol precipitation

검색결과 80건 처리시간 0.022초

The Importance of the Aging Time to Prepare Cu/ZnO/Al2O3 Catalyst with High Surface Area in Methanol Synthesis

  • Jung, Heon;Yang, Dae-Ryook;Joo, Oh-Shim;Jung, Kwang-Deog
    • Bulletin of the Korean Chemical Society
    • /
    • 제31권5호
    • /
    • pp.1241-1246
    • /
    • 2010
  • Ternary Cu/ZnO/$Al_2O_3$ catalysts were prepared by a co-precipitation method. The precursor structures were monitored during the aging. The first precipitate structure was amorphous georgeite, which transformed into the unknown crystalline structure. The transition crystalline structure was assigned to the crystalline georgeite, which was suggested with elemental analysis, IR and XRD. The final structure of precursors was malachite. The Cu surface area of the resulting Cu/ZnO/$Al_2O_3$ was maximized to be 30.6 $m^2$/g at the aging time of 36 h. The further aging rapidly decreased Cu surface areas of Cu/ZnO/$Al_2O_3$. ZnO characteristic peaks in oxide samples almost disappeared after 24 h aging, indicating that ZnO was dispersed in around bulk CuO. TOF of the prepared catalysts of the Cu surface area ranges from 13.0 to 30.6 $m^2/g_{cat}$ was to be 2.67 ${\pm}$ 0.27 mmol/$m^2$.h in methanol synthesis at the condition of $250^{\circ}C$, 50 atm and 12,000 mL/$g_{cat}$. h irrespective of the XRD and TPR patterns of CuO and ZnO structure in CuO/ZnO/$Al_2O_3$. The pH of the precipitate solution during the aging time can be maintained at 7 by $CO_2$ bubbling into the precipitate solution. Then, the decrease of Cu surface area by a long aging time can be prevented and minimize the aging time to get the highest Cu surface area.

Antifungal Mechanism and Properties of Antibiotic Substances produced by Bacillus subtilis YB-70 as a Biological Control Agent

  • Kim, Yong-Su;Kim, Sang-Dal
    • Journal of Microbiology and Biotechnology
    • /
    • 제4권4호
    • /
    • pp.296-304
    • /
    • 1994
  • Antibiotic substances were produced by Bacillus subtilis YB-70, a potential biocontrol agent found to suppress root-rot of eggplant (Solanum melonggena L) caused by Fusarium solani, in a dextrose glutamate medium and isolated by isoelectric precipitation. Partial purification was performed by column chromatography on silica gel with two solvent systems: chloroform-methanol and methanol-chloroform-water as eluting solvents, This active fraction YBS-1 s contained antifungal activity were soluble in ethanol, methanol, and water, but were not soluble in other solvents including acetone, butanol, ethyl ether, dimethylformamide, propanol, and etc. High performance liquid chromatography and thin layer chromatographic separation of YBS-1s showed that they have been composed of three biological active bands that were named YBS-1A, -1B, and -1C. The substances were stable to heat and resistant to protease. YBS-1s were active against a wide range of plant pathogenic fungi but did not inhibit the growth of bacteria and yeasts. They were not only fungicidal but also fungistatic against chlamydospores of F. solani. The $ED_{50}$ values for the chlamydospore germination and the germ-tube growth of F. solani were $O.725\mu\textrm{m}/ml\;and\;O.562\mu\textrm{m}/ml$, respectively. Microscopic observations proved the substances restricted the growth of phytopathogenic fungus F. solani by spore burst followed by dissolving of its germ-tube, and caused abnormal hyphal swelling after application to chlamydospores or growing hyphae. Cultural filtrate of B; subtilis YB-70 also suppressed the development of root-rot of eggplant in pot tests.

  • PDF

Effect of temperature on fractional precipitation for paclitaxel purification

  • Jeon, Soon-Yim;Kim, Jin-Hyun
    • 한국생물공학회:학술대회논문집
    • /
    • 한국생물공학회 2005년도 생물공학의 동향(XVI)
    • /
    • pp.355-359
    • /
    • 2005
  • 분별침전 공정에서 순도 및 수율에 미치는 온도의 영향을 확인하였다. 분별침전을 위해 일정 온도에서 보관할 경우와 단계적으로 보관 온도를 하강하는 경우에 대한 분별침전 효율을 확인하였다. 일정온도$(0^{\circ}C)$에서 보관할 경우 높은 수율$({\sim}84%)$을 얻을 수 있는 반면 단계적으로 보관 온도를 하강할 경우 상대적으로 높은 순도$({\sim}79%)$를 얻을 수 있었다. 또한 단계적으로, 큰 폭으로 보관 온도를 하강 시킬 경우 더 높은 순도를 얻을 수 있었다. 저장온도$(-20^{\circ}C{\sim}12^{\circ}C)$를 일정하게 유지할 경우 paclitaxel 순도 면에서 $0^{\circ}C$가 가장 효과적이었으며 온도변화에 따른 수율은 거의 영향이 없었다. 따라서 최종 정제를 위한 전 처리 공정으로 분별침전 공정이 간단하고 매우 효과적임을 알 수 있었다.

  • PDF

해조단백질의 추출에 관한 연구 1. 수용성 단백질의 추출 (STUDIES ON THE EXTRACTION OF SEAWEED PROTEINS 1. Extraction of Water Soluble Proteins)

  • 류홍수;이강호
    • 한국수산과학회지
    • /
    • 제10권3호
    • /
    • pp.151-162
    • /
    • 1977
  • 분포량이 많고 식용되고 있는 중요 해조의 효율적인 이용과 영양학적인 의의를 구명하기 위한 기초자료를 얻기 위하여 동근돌김(Porphyra suborciculata). 잎파래(Enteromorpha linza). 톳(Hizikia jusiforme). 모자반(Sargassum fulvllum), 미역(Undaria pinnatifida), 청각(Codim fragile), 셀만모자반(Sargassum kjellmanianum), 구멍갈파래(Ulva pertusa)등 8종을 선정하여, 이들 해조의 불용성 단백질 추출에 영향을 주는 제요소 즉 조체처리별, 추출온도와 시간별, 시료일추출용매화, pH의 영향등을 검토하고 또한 추출액중의 단백질 심전조건에 대하여 검토하였다. 1. 식용 해조의 조단백질 함량은 둥근돌김(Porphyra suborbiculat) $24.14\%$, 미역(Undaria pinnatifida) $15.7\%$, 톳(Hizikia jusiforme) $7.66\%$, 모자반(Sargasum fulvellum) $12.61\%$, 셀만모자반(Sargassum kjellmanianum) $14.08\%$, 잎파래(Enteromorpha linza) $10.86\%$, 구멍갈파래(Ulva Pertusa) $16.60\%$, 청각(Codium fragile)$9.89\%$이었다. 2. 시료의 처리조건에 따른 추출효과는 dry icemethanol 한제 중에서 동결시켜, 해사를 첨가하여 마쇄한 시료가 수용성 단백질 추출성적이 월등하게 좋아, 막지사발에서 마쇄한 $1.5\~2.5$배의 추출성적을 보였다. 3. 시료일추출용매비는 점질물이 적은 구멍갈파래, 잎파래는 1:20(w/v)에서, 점질물량이 많은 청각,미역, 톳, 모자반, 둥근돌김 등은 1:30(w/v)에서, 셀만모자반은 1:40(w/v)일 때 추출성적이 좋았다. 4. 추출시간은 구멍갈파래, 잎파래는 1시간, 둥근돌김, 톳, 미역, 모자반, 셀만모자반은 2시간, 청각은 3시간 정도에서 가장 효과적이었다. 5. 추출온도는 톳이 $40^{\circ}C, 둥근돌김, 청각, 잎파래 미역, 모자반, 셀만모자반 $50\%$에서, 구멍갈파래는 $60^{\circ}C$에서 최고의 추출성적을 보였다. 6. pH의 영향은 각 시료마다 대동소이하여 $pH9\~12$에서 가장 좋은 결과를 얻었다. 7. 추출 최적조건에서의 수용성 단백질 추출율은 1차 추출에서 전조단백질에 대하여 평균 $63\%$, 2차 유출에서 평균 $8.6\%$ 합계 $74\%$ 정도의 수용성 단백질 추출이 가능했으며, 1차에 대한 2차의 추출비율이 7.5:1이었다. 8. 단백질 침전분리 조작으로는 Barnstein method, methanol 처리법, TCA 처리법, 가열처리법 순으로 침전효과가 있었다.

  • PDF

Halomonas sp. ES-10균주가 생산하는 효소세제용 알칼리성 Protease

  • 김찬조;이재숙;최성현;오만진
    • 한국미생물·생명공학회지
    • /
    • 제25권1호
    • /
    • pp.51-55
    • /
    • 1997
  • To utilize the alkaline protease produced by Halomonas sp. ES-10 as an enzyme detergent, the crude enzyme was obtained by methanol precipitation and lyophilization. And it was processed to coated enzyme.The best mixing ratio of components such as coated enzyme, builders, actives, fillers and adjuvants on detergency was examined, and temperature and pH influencing detergency were also tested. Detergency test 0.15% detergent solution was carried out on EMPA test cloth #116 with shaking(90 rpm) for 10 min after 30 min of pretreatment. The detergent which contained coated-enzyme 1%, Zeolite 4A 20%, Tween 80 1. 5%, sodium borate 30%, sodium meta silicate 7.5% and water 40% showed about 90% of washing efficiency at 40$\circ $C and pH 10.0.

  • PDF

Purification and Properties of Non-Cariogenicity Sugar Produced by Alkalophilic Bacillus sp. S-1013

  • Ryu, Il-Hwan;Kim, Sun-Sook;Lee, Kap-Sang
    • Journal of Microbiology and Biotechnology
    • /
    • 제14권4호
    • /
    • pp.751-758
    • /
    • 2004
  • The NCS(Non-Cariogenicity Sugar) from Bacillus sp. S-1013 was purified by cold acetone and methanol precipitation, and DEAE-cellulose ion-exchange and Sephadex G-100 column chromatographies, to yield an amorphous yellow syrup. The melting point and $[\alpha]_D^{20}$ were 155-$157^{\circ}C$ and +53, respectively. Instrumental analyses such as FT-IR, $^1H-NMR, and ^{13}C-NMR$ showed that the NCS contained an O-H group, C-H, C=O, $NH_2$, anomeric carbon, anomeric proton, N-acetylgalactose, fucose, and neuramic acid, thus, the NCS was determined to be a trisaccharide of Fuc($1\longrightarrow4$)GalNAc($2\longrightarrow6$) NeuAc.

Purification and Characterization of Cold Active Lipase from Psychrotrophic Aeromonas sp. LPB 4

  • Lee, Han-Ki;Ahn, Min-Jung;Kwak, Sung-Ho;Song, Won-Ho;Jeong, Byeong-Chul
    • Journal of Microbiology
    • /
    • 제41권1호
    • /
    • pp.22-27
    • /
    • 2003
  • A lipase from Aeromonas sp. LPB 4, a psychrotophile isolated from a sea sediment was purified and characterized. The lipase was purified 53.5 fold to a homogeneous state by acetone precipitation and QAE sephadex column chromatography and its molecular weight was determined to be 50 kDa by SDS-PAGE. The enzyme exhibited maximum activity at 10$^{\circ}C$ and was stable at temperatures lower than 50$^{\circ}C$. This lipase favored substrates containing medium carbon chain of acyl group, while too low and high carbon chain decreased its activity. The lipolytic activity of purified lipase was slightly increased by the addition of 0.1% detergent, but decreased by 1% of detergent. Butanol severely decreased the lipase activity while methanol increased the activity about 15%.

Quantitative determination of pseudoephedrine in human plasma by reversed-phase liquid chromatography-electrospray ionization mass spectrometry

  • Kim, Jin-Ki;Cho, Jung-Hye;Woo, Jong-Soo;Kim, Chong-Kook
    • 대한약학회:학술대회논문집
    • /
    • 대한약학회 2002년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2
    • /
    • pp.394.2-394.2
    • /
    • 2002
  • A sensitive and selective reversed-phase LC-ESI-MS method to quantitate pseudoephedrine in human plasma was developed and validated. Phenacetin was used as an internal standard. Samples were prepared simply by acetonitrile precipitation without an evaporation step. Chromatographic separation was achieved on a XTerra MS C18 column ($150{times}2.1$ mm I.D.. 3.5 $\mu\textrm{m}$ particles). using gradient elution with 0.5% (v/v) trifluoroacetic acid (TFA) in water and 0.5% (v/v) TFA in methanol at a flow-rate of 0.1 ml/min. (omitted)

  • PDF

Determination of Liraglutide in Rat Plasma Using Selective Liquid Chromatography-Tandem Mass Spectrometry

  • Younah Kim;Hyoje Jo;Yelim Lee;Soo Yeon Kang;Sangkyu Lee
    • Mass Spectrometry Letters
    • /
    • 제14권4호
    • /
    • pp.141-146
    • /
    • 2023
  • Liraglutide is a medication prescribed for the management of type 2 diabetes and chronic obesity. A simple, sensitive, and selective liquid chromatography-tandem mass spectrometry (LC-MS/MS) method was developed and validated for the quantitative analysis of liraglutide in rat plasma. After a simple protein precipitation step, liraglutide was chromatographically separated using the ACQUITY Premier Peptide BEH C18 Column with mobile phases comprising 50% acetonitrile and 50% methanol, and water with 0.3% FA. Positive ion electrospray ionization in multiple reaction monitoring mode was used to achieve detection. Good linearity was observed in the 5-600 ng/mL concentration range (R2 > 0.99). Liraglutide had intra- and inter-day precision values of 2.13%-9.86% and 4.14%-8.36%, respectively. The accuracy ranged from -2.36% to 2.58%. The recovery and matrix effect were within acceptable limits. This selective LC-MS/MS method was used to study the pharmacokinetic properties of liraglutide after subcutaneous administration in rats.

기계적합금화로 제조된 Ni-20Cr-20Fe-5Nb 합금에서 PCA로서 H2O의 역할과 시효석출거동 (The Role of H2O as PCA and the Precipitation Behavior in Mechanically Alloyed Ni-20Cr-20Fe-5Nb Alloy)

  • 김일호;권숙인;이원식;채수원;황선근;김명호
    • 한국분말재료학회지
    • /
    • 제13권3호
    • /
    • pp.178-186
    • /
    • 2006
  • The effect of use of $H_2O$ as PCA(process control agent) to prevent the carbon contamination during mechanical alloying process and the precipitation behavior in Ni-20Cr-20Fe-5Nb bulk alloy after aging were investigated. NbC and $Cr_2O_3$ were formed during mechanical alloying and consolidation processes in the Ni-20Cr-20Fe-5Nb alloy in which methanol($CH_3OH$) was added as PCA. Formation of NbC in this alloy decreased the amount of Nb dissolved in the Ni matrix. The use of $H_2O$ as PCA in Ni-20Cr-20Fe-5Nb alloy prevented the formation of NbC and increased the hardness. The increase of hardness in this alloy was attributed to the increased amount of Nb dissolved in the Ni matrix. After aging treatment for 20 hours at $600^{\circ}C\;and\;720^{\circ}C$ of Ni-20Cr-20Fe-5Nb bulk alloy in which $H_2O$ added as PCA, ${\gamma}"$$(Ni_3Nb,\;tetragonal)\;and\;{\delta}\;(Ni_3Nb,\;orthorhombic)$ precipitates were formed, respectively. The precipitation temperatures of ${\gamma}"$ and ${\delta}$ in this bulk alloy were lower than those in commercial IN 718 alloy. It seemed that the lower precipitation temperatures for ${\gamma}"$ and ${\delta}$ in this bulk alloy than in commercial IN 718 alloy were due to severe plastic deformation during mechanical alloying.