• 한국분말재료학회지
• /
• 제20권6호
• /
• pp.432-438
• /
• 2013

In this study, analysis on the oxidation behavior was conducted by a series of high-temperature oxidation tests at both $800^{\circ}C$, $900^{\circ}C$ and 1000 in the air with sintered STS 316L. The weight gain of each oxidized specimen was measured, the oxidized surface morphologies and composition of oxidation layer were analyzed with Scanning Electron Microscope-Energy Dispersive x-ray Spectroscopy (SEM-EDS), finally, the phase change and composition of the oxidized specimen were shown by X-Ray Diffraction (XRD). As a result, the weight gain increased sharply at $1000^{\circ}C$ when oxidation test was conducted for 210 hours. Also, a plentiful of pores were observed in the surface oxidation layers at $900^{\circ}C$ for 210 hours. In addition, the following conclusions on oxidation behavior of sintered STS 316L can be obtained: $Cr_2O_3$ can be formed on pores by influxing oxygen through open-pores, $(Fe_{0.6}Cr_{0.4})_2O_3$ can be generated on the inner oxidation layer, and $Fe_2O_3$ was on the outer oxidation layer. Also, $NiFe_2O_4$ could be precipitated if the oxidation time was kept longer.

• 유기물자원화
• /
• 제12권2호
• /
• pp.41-51
• /
• 2004

국내에서 다양한 용도의 식품용기로 사용되고 있는 재생 플라스틱 (일명 다라이) 제품을 23개 회사로부터 수집하여 그 재질을 파악하고 국내 기준 규격에의 적합성 여부와 안전성을 파악하고자 하였다. 다라이 재질을 FT-IR과 DSC로 분석한 결과 대부분의 시료에서 PE의 특징적 피크를 포함하였고, EA 분석 결과 PE과 마찬가지로 C와 H의 비율이 1:2로 나타났다. 그리고 페놀과 포름알데히드는 모든 시료에서 검출되지 않았고, 항산화제로서 Irganox 1010, Irganox 1076 및 Irganox 1330 등이 검출되었다. 중금속에 대한 재질 실험에서는 총 23개 시료 중 7개 시료에서 기준치를 초과하는 100 mg/kg이상의 납 함량을 나타내었다. 현재 식품공전 상에는 다라이와 같은 재생 플라스틱에 대한 기준과 규격이 설정되어 있지 않은 상태이다. 따라서 식품용기로서 다라이를 사용하기 위해서는 엄격한 관리 방안이 강구되어야 할 것으로 판단된다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.348-351
• /
• 2006

Bipolar plate, which forms about 50% of the stack cost, is an important core part with polymer electrolyte membrane in PEMFC. Bipolar plates have been commonly fabricated from graphite meterial having high electrical conductivity and corrosion resistance. Lately, many researchers have concentrated their efforts on the development of metallic bipolar plate and stainless steel has been considered as a potential material for metallic bipolar plate because of its high strength, chemical stability, low gas permeability and applicability to mass production. However, it has been reported that its inadequate corrosion behavior under PEMFC environment lead to a deterioration of membrane by dissolved metal ions and an increase in contact resistance by the growth of passive film therefore, its corrosion resistance as well as contact resistance must be improved for bipolar plate application. In this work, several types of coating were applied to 316L and their electrical conductivity and corrosion resistance were evaluated In the simulated PEMFC environment. Application of coating gave rise to low interfacial contact resistances below $19m{\Omega}cm^2$ under the compress force of $150N/cm^2$. It also made the corrosion potential to shift in the posit ive direct ion by 0.3V or above and decreased the corrosion current from ca. $9{\mu}A/cm^2$ to ca. $0.5{\mu}A/cm^2$ in the mixed solution of $0.1N\;N_2SO_4$ and 2ppm HF A coat ing layer under potentiostatic control of 0.6V and $0.75V_{SCE}$ for 500 hours or longer showed some instabilities, however, no significant change in coat Ing layer were observed from Impedance data. In addition, the corrosion current maintained less than $1{\mu}A/cm^2$ for most of time for potentiostatic tests. It indicates that high electrical conductivity and corrosion resistance can be obtained by application of coatings in the present work.